Medium point charge when copy/move files

Similar Questions

• Error messages when you move files PSE13 and PSE14

  I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

  Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

  But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

  Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

  And every now and then the move operation is going well through.

  I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

  Is there another way to move the folders? Is there a solution to this behavior?

  juhar76990688 wrote:

  Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

  Yes, it was what I was going to suggest it.

  I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

  Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

• Always view the details when copy/move the files?

  Is it possible to configure Windows Explorer to display details such as the transfer speed and remaining time whenever I have to copy or move files, so I wouldn't have to broaden the dialogue to transfer whenever I do?

  Thanks, Veselin

  Hi Veselin,

  This is not possible. If you want to provide feedback about this, then make reference to:

  https://connect.Microsoft.com/

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Copy/move files - security problem

  I have a laptop gateway model MP8708, which ran on XP.

  Jack was no longer working with the power cord and the battery wouldn't hold a charge. The computer is unusable without the power supply cord is not an option to turn back on my old Gateway computer. Instead of investing the money in the repair of a computer that is several years old, I bought a new computer.

  On the gateway computer (original), I got my computer set up to always ask for my password before it would allow access after 5 minutes of inactivity proved, or whenever the computer went into hibernation or has been disabled.

  The original hard drive Gateway has been removed so I could copy or move my files from the old hard drive to my new Acer laptop hard drive, and I have a device that allows me to use a USB to connect it to my new computer.

  The new Acer running Windows 7.

  -When I try to drag a file on my new hard drive, I get this: "file access denied. You need give the administrator permission to copy this file. "If I click CONTINUE, I get"file access denied. You need permission to perform this action. You need permission from the administrator of the computer to make changes to this file. »

  -When I try to drag an entire folder of my old hard drive to my new hard drive, I get: "file access denied. "You need give the administrator permission to copy this folder. When I click on CONTINUE, I get: "file access denied. You need permission of the administrator of the computer to make changes to this file.

  I guess it's because I had a password set up, I have * * know the password.

  How to get the old hard drive to let me copy or move these files? They are MS Word files as well as jpg, or audio files, etc., not computer programs.

  Thank you.

  Hello

  Try to take possession of the disc and check.

  a. click on the drive, click Properties and then click the Security tab.
  b. click Advanced and then click the owner tab.
  c. click on edit and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OK and then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Appropriating a file or a folder
  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Re: Satellite Pro U400-160 - freezes when copying larger files or videos

  Hello:

  I have a Satellite Pro U400-160 and a VERBATIM external hard drive USB eSATA combo.

  If I turn on AHCI mode recognizes the drive, but when copying the video files or large file size, the system is frozen. However if I remove the mode AHCI works correctly. I have the version 9.8.9.1023 Intel (r) Matrix Storage Manager and my laptop BIOS v4.0 and Windows Vista Business.

  Thanks in advance.

  Hello

  Normally the AHCI mode has nothing to do with an external HARD drive. It is only important for the internal HARD disk if you install Windows.

  Anyway, you have installed all the updates of Windows for Vista?
  In addition, you should test another external HARD disk or with another cable.

  Welcome them

• Windows 7 - "Try Again" error message when you move files, creating folder, etc.

  When I try to move files, create a new folder or move a file, save a file with a new file, etc, I get an error message indicating "Item not found", with a description of "Cannot find this item", "this is no longer in C:\...» "," Check the location of the item and try again.

  

  So far, I have tried the following:

  ·         I have run CHKDSK on the drive. [chkdsk c: r], "CHKDSK" came back without error - the disk is a disk SSD

  ·         I also ran "sfc/scannow", she also returned without error.

  ·         I uninstalled all updates that occurred during the time that this came - tested, the computer and reinstalled them.

  ·         Updates of Windows computer are all up to date.

  I have in case I have to move several files, press the button 'Try Again' to each folder that I move.  This becomes a big problem.

  Any help to fix this would be greatly appreciated.

  Dell Precision M 4800: Processor; Intel Core i7-4810MQ CPU @ 2.80 GHz, 2801 Mhz, 4 Lossnay 8 logical processors. Windows 7 Enterprise (64-bit) SP1 | 16 GB memory | SK hynix SH920 2.5 "512GB SSD hard drive

  I've posted this before, but after a few replies, the thread has been cut and has all the additional answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-error-message-when-moving-files-creating/4b9e607c-7163-4c04-8a78-29e65cc4bf9c

  Hello Greg,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You did any hardware or software changes to your computer before the show.

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of the corrupted Windows files or incorrect registry settings.

  To diagnose the problem, check if the problem occurs in safe mode.
  Refer to this article:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Mr Andersen replied on September 4, 2010 and check the problem with folders.
  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• When copying a file in flash memory, a shortcut of the file is created with! Why is this happening?

  When I copy a file in flash memory a shortcut depending on the size of 1 KB from the file is created with the original?

  is this a virus?
  What is the solutions for that?

  Sorry, I misread your question. I thought that you receive only a shortcut.

  I don't know what would cause. Have you tried with another flash drive? Have you tried to format the flash drive that you use, when there is nothing on what you need?

  It won't hurt a thing to check for malware. Download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• need help to find/download program "windows Easy Transfer" if I can copy/move files/programs from the windows XP to new windows laptop desktop 8

  Read online somewhere that there is a program of "Windows Easy Transfer" of the program, which was set up to manage the transfer programs/files from a pc to another.  My challenge going on my desktop XP files/programs to a new laptop to Windows 8.   From now on... I can not find the program "winds easy transfer.    Any ideas on how to accomplish this or does anyone use this program... and the results as expected?   THX.    Dave

  Hi Dave,.

  
  Tool using Windows Easy Transfer, you can automatically copy your files, photos, music, e-mail, settings, and more to your new Windows 8 PC. This software allows you to transfer data with cables of simple transfer or through a network, external drive, or a CD/DVD.
  To download the Windows Easy Transfer for Windows XP tool, see this link.
  

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=7349

  
  To transfer files and settings from another PC, see this link.

  http://Windows.Microsoft.com/en-in/Windows-8/transfer-files-settings-another-PC

  Hope the above information is helpful. If you have any doubts, please reply to this message and we will be happy to help you further.

• Windows Explorer hangs when copying large files on external USB drive

  I'm trying to copy files over 1 GB of my pc to a WD MyBook external drive. After about 10% on the progress indicator, Windows Explorer crashes. When I cancel the work, nothing happens until I unplug the USB. Then I have the pc returns to normal.

  During my research, I discovered that a lot of people have this problem. I have tried many suggestions, but without result. The last thing I tried was a full format the C: drive with a fresh install of Vista. Copy a large file gave me the message 'Calculating time' infinite. After you have installed SP1 reappeared the problem as explained above.

  Some of the things I've tried:
  check the external hard drive: no problem found and the problem occurs on all my MesLivres 3
  safe mode
  Superfetching disabled
  update the motherboard bios

  Now my last request resource helps professionals. If I don't find a solution I'll have to go back to XP, achieve Win7 or one rating for Mac... a lot of things to think about.

  Best regards
  Rafael

  Try to copy in safe mode. If can be a slow usb port. Try anther one.

  Good luck.

  Exp. comes from http://www.computerstar.ca/

• Dreamweaver CS5.5 removing Code when copying a file

  When I try to copy or duplicate a file in Dreamweaver CS5.5 for Mac, Dreamweaver deletes the last five or six lines of code. I have to create a lot of almost identical Web pages with the same footer on each page, and it's really exhausting to have to go again in each page and re - create the code that has been removed and Dreamweaver. I've updated the Dreamweaver software both OS, but it has not fixed the problem. No matter if I use the "copy", "Paste", "duplicate" functions of Dreamweaver, or if I just use command + C, command + V. I can't find someone online who have a similar problem. Any of you know of a fix?

  Here is an example:

  The code at the end of the original page:

  < p > < a style = "color: #FF6600;" make-weight: bold; "' make-size: 10px" href = " http://Osu.okstate.edu " > OSU Homepage < /a > < font style = "-font size: 10px" > | < / font > < a style = "color: #FF6600;" make-weight: bold; "' do-size: 10px" href = " http://admissions.okstate.edu " > admissions home page < /a > < font style = "font size: 10px" > | < / font > < a style = "color: #FF6600;" make-weight: bold; "do-size: 10px" href = "mailto: [email protected] " > contact us < /a > < font style = "font size: 10px" > | "" < / font > < a style = "color: #FF6600;" make-weight: bold; "' make-size: 10px" href = " http://admissions.okstate.edu/getmail " target = "_blank" > Get Mail < /a > < /p > < / center > < / html > "

  What ends up on the copied page:

  < p > < a style = "color: #FF6600;" make-weight: bold; "' make-size: 10px" href = " http://Osu.okstate.edu " > OSU Homepage < /a > < font style = "-font size: 10px" > | < / font > < a style = "color: #FF6600;" make-weight: bold; "' do-size: 10px" href = " http://admissions.okstate.edu " > admissions home page < /a > < font style = "font size: 10px" > | < / font > < a style = "color: #FF6600;" make-weight: bold; "do-size: 10px" href = "mailto: [email protected] " > contact us < /a > < font style = "font size: 10px" > | "" < / font > < a style = "color: #FF6600;" make-weight: bold; do-size: 10

  On the side of the remote server, I can with the button straight on, say, index.html and copy or duplicate. It is in this process that the code is being cut.

  I have never work that way and wouldn't for various reasons.

  Best to open index.html in your Local Site.

  Hit file > SaveAs "some-new - upploadare.

  Try a few times and report with your results.

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• Satellite Pro A110 blocking (he must press power) when copying large files

  I have two users the two ProA110 PSAB1C-GM60XE that hangs just at the copy files or randomly just by using the network connection.

  The network card is a Realtek RTL8139/810 x Family Fast Ethernet NIC

  I updated the driver to the latest version 5.708.1030.2008

  I also reset the TCP/IP Protocol:
  c:\netsh int ip reset c:\resetlog.txt

  Disable "Allow the computer to turn off this device to save power" on the properties of the NETWORK adapter

  I tried to re - install XP and the same problem.

  Shows the Windows event log. "Your computer failed to renew its address from the network (from the DHCP server) for the network card with network 0016D address 4258701." The following error occurred:

  The semaphore timeout period has expired. . "Your computer will continue to try and obtain an address on its own from the server network address (DHCP) '. Nothing came on Internet search that help.

  All who have similar problems and how it was resolved very useful.

  Thank you!

  Hmm, I searched a bit on MS pages and found this:
  em http://www.Microsoft.com/technet/support/EE/Transform.aspx?ProdName=Windows%20Operating%20Syst & ProdVer = 5.2 & EvtID = 1003 & EvtSrc = DHCP & LCID = 1033

  The reasons for this question might be:
  The DHCP server is down or does not.
  The DHCP relay does not work correctly.
  The network is down.
  The firewall on your computer blocks on broadcast network traffic.
  Network interface card or your computer driver does not work correctly.

  Microsoft offers different solutions, workaround and solution proposals.
  Please visit the mentioned MS.

  Good luck

• Envy 15 freeze on the transfer of data USB 3.0 drive when copying many files

  Thanks in advance.

  My brand new envy 15 (model LW897AV) (15 t-3000 CTO) crashes every time that I try to transfer a lot of files from a Flash DRIVE via the USB ports on the laptop.

  It gets about 5 minutes, then simply hangs. He had done this 7 times now. I got a message on a blue screen BSOD once:

  0xE0010002

  After calling technical support HP and Google search, they think it's a problem with the USB 3.0 controller or something to do with the hibernation mode. I updated the driver for USB 3.0 controller. No joy. Also, I changed the power settings to never Hibernate. Still no solution.

  The USB ports on the left side appear to be able to let go. Next to the USB port is a wireless mouse, and he loses too much power (the Green led turns off). Sometimes the mouse keyboard and the touchpad still works. Other times, everything is frozen.

  I can recreate the problem with two different USB drives. Of course, these USB drives have no problem with either of the readers.

  Help!

  Thank you. -ChipTay

  Hi kstoltz. I have the solution for you.

  Return it. I spent more than 20 hours, sending in the dump and bsod messages files. SUPPORT TECHNIQUE IN THE U.S. WAS AWESOME.

  FAR IS A SUPPORT TECHNIQUE WAS SO PAINFUL THAT I THREW ALMOST THE ENVY 15 IN THE MARINA.

  They said it was a problem with the hardware with USB 3.0 ports and file transfers. There was no trouble, so they have defective only intel chips on motherboards out there.

  I had an Exchange with an upgrade of RAM and processor for my troubles.

  :-)

  I love HP.

• How to maintain sequencing when copy/move a collection?

  Hi guys,.

  I needed to duplicate a collection by creating a new. I turned the new collection in a set of targets, used the command + A and B.

  
  

  Once copied into their new home, the images follow one another differently than in the original collection. There is a kind of menu on the toll bar. I tried a few variations in the collection of recipients, without success.

  Any ideas?

  
  

  Thank you.
  

  Select the Collection (in the Collections Panel)

  Right-click the Collection

  Choose "duplicate Collection."

  You now have a collection of 'Copy' and in my experience, the sort order is according to the original!

  Right click and choose "set as target Collection.

  No 'added' images will be in line with the set sort order.

• Keep the original creation date when copying or moving files (Windows XP/7, Windows Server 2003/2008)

  I know that the default behavior of (any version) Windows when copying or moving files, is that Windows makes everything first creates a new folder, copy the content, and when you move files, deletes the source after successful copy folder. Unlike Mac OS, where mechanisms of copy and move assume that when you copy a folder, the properties of the copied folder should have the same properties as the source folder, so to keep the original date of creation!

  Is it possible to change this behavior in Windows? I know that Robocopy in Windows Server 2008 has an option to keep the dates of creation of record, but I would like to know if you can change Windows 7/Windows Server 2008 behave similarly.

  It is very annoying that when you restore or copy a folder, the new folder has the date of the creation of the current date instead of the date of original creation.  People tend to look for old records that exist is no longer when you copied or moved the files.

  Hey E Kyung,
   
  There is no way to do this in windows. The design of Windows, this is the creation date refers to the file, while the date of the amendment relates to the content. If the creation date is really important to you, you can set after the copy with a utility.

  The easiest is to right-click on the file and drag it to the destination folder. you will be asked to copy or move. If you move, the creation date will not change.

  Yes, Robocopy is available in Windows 7.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• If you move files to an external drive in PSE 7, are these backup files when you catalog backup

  My catalog is now about 50 GB and I want to decrease its size so that it takes up less space on my hard drive, and more important, so my backups and restorations do not take as long.    Files are not to be modified in the future then why keep saving them?  If I move the files on an external drive using files offline, copy/move files on the removable disk will be backup items these files as well as files on my C drive when I backup my catalog?

  If not, can I move files to a new catalogue and catalogue of dangerous data (such as albums, tags, etc.)?

  Thanks for any help.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  When restore you to the original location on the destination computer, the fact that restoring average the same path where the files were on the source computer?

  Yes, the exact same path.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  I used this option once when I saved on my XP computer and restored to my Vista machine.  It took me a long time to get rid of extra files generated by Vista.

  If you're moving from XP to Vista and your records are under C:\Documents and Settings\, Vista will create aliases to your user folders to maintain compatibility (since Vista has a different naming convention for the files of the user).  Vista itself will not create additional folders, but programs like the PES can be confused by having two different names for the same file.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  I now store everything (files catalog and photos) in a folder with the same name under C:\ on both computers.

  As long as it is not under C:\Documents And Settings, then use the original location option to restore to the same exact path.

  The option new location / Restore Original Folder Structure will preserve your folder hierarchy, but create very long paths by adding in the root files, for example \users\ellis\pictures and it is difficult for many people to collapse these unnecessarily added files.