Drive CDDVD code 19 problem

Similar Questions

• HP Pavilion dv6-7020us: driver error Code 28 problems

  Sorry if this is kind of a long start...

  Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

  First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

  Got Windows 7 x 64 bit installed.

  Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

  The problem, however...

  With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

  Now currently at a loss to know what to do...

  Properties: Details: Hardware ID: value...

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Network controller

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

  PCI\VEN_1814 & DEV_539A & CC_028000

  PCI\VEN_1814 & DEV_539A & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FFOO

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E22 & CC_020500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device

  ACPI\HPQ0004

  * HPQ0004

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  . . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

  Hello:

  Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

  Network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp57538.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56166.exe

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56158.exe

  Controller of Bus SM: NOTE: first install this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56156.exe

  Controller of universal serial (USB) Bus:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  ACPI\HPQ0004:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

  USB\VID_138A & PID_0018:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56403.exe

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• driver software encountered a problem code is 31

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.__ (Problem code 0000001F)

  Signature of the problem

  Additional information about the problem

  Bucket ID: 562419118

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: pci\ven_1022 & dev_7455

  Configure the class GUID: {4d36e97d-e325-11ce-bfc1-08002be10318}

  PnP problem code: 0000001F

  Name of the driver: pci.sys

  Driver version: 6.0.6002.18005

  Driver date: 11/04/2009

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Hello

  Is the hardware ID - Tunnel of graphics from AMD - 8151 HyperTransport (MC) AGP3.0

  Check with AMD and also Support from the manufacturer of your system and downloads to update or reinstall
  currently the drivers.

  AMD - Contact
  http://www.AMD.com/us/aboutamd/contact-us/pages/contact-us.aspx

  Drivers & support AMD
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ====================================

  Given that this could be caused by a corrupt or drive or another file, you must also run these 1:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Hard drive Satellite Pro C650 problem

  Hi, a friend of mine's laptop in me to take a look because he wasn't starting. He was going straight to boot from the network map, so a little thought that it's a dead hard drive. Then, I checked the BIOS and as expected not detected HARD drive. Removed hard drive and reinstall, same problem. Then I tried another working SATA drive I've saved, not detected in the BIOS. I then tried the hard drive of my HP Elitebook 6930p for laptop, yet undetected work.

  Someone at - he fell on this issue before, it looks like a question of Council?

  Thank you

  Vincent

  Hi Vincent

  When you set the BIOS to default settings is the problem persists? Another SATA drive recognized, or not?

  It is not easy to say what the problem is, but maybe is the faulty disk controller.

• DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I'm not able to determine which driver is causing the problem

  I get a blue screen everytime I reboot my laptop.  I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033).  I am not able to know which driver is causing this problem, please help.  Thank you

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• PILOT DELIMMA! I have a TSST corp CCA/DVD TS-L462D ATA device driver & get code 19

  Original title: DRIVER DELIMMA! I have a TSST corp CCA/DVD TS-L462D ATA device driver & receive code 19, I tried all HELP!

  Please see above, how can I fix code 19?      Thank you!

  Hello

  I suggest you run the fixit from this link and if it helps:

  http://support.Microsoft.com/kb/314060

  Check if that helps.

• Of hard drive and installed new drive but Code failure not accepted. Original install was XP with Vista update.

  Of hard drive and installed new drive but Code failure not accepted.  Original install was XP with Vista update.  What do I need to install the xp before installing vista?

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Dell laptop 14zxps with windows 7... I get the error code 43 problem when I connect my USB on my laptop

  Hey, I have a laptop of dell 14zxps with windows 7... I get the error code 43 problem when I connect my USB to my laptop... n this laptop is designed in a way where the battery cant b removed... Please help me on how my USB is started again here... Thank you :D

  Try this.

  http://support.Microsoft.com/kb/817900

• HP Pavilion dv4130us - requires the video controller driver to clear the problem of Device Manager

  Any help would be appreciated. Have owned the laptop since birth. Update memory & HDD for patches of bloatware to Uncle Bill. Naoual need a video driver to resolve the problem of video hardware acceleration. I tried HP detects online etc, no video is available, would use the XP version, but HP will not install it because it is an unsupported operating system?

  Hello:

  I'm not quite clear what operating system you are running.

  If you are using XP, you then this video driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=ob-52779-1

  If you're running Vista, then you need this one.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

  If you are running windows 7, run the Vista driver above. It will error out (give an unsupported OS message, I believe).  Close the error window.

  Now, go into your device manager. Click on standard vga controller. Click on the driver tab, click on set to update driver. Select the browse my computer for the software method and navigate to C:\SWSetup\sp34749. Make sure that the include subfolders is selected, and the driver should install.

  Graphics card in your PC isn't completely Vista or W7 capable. You should now have hardware acceleration and be able to change your maximum permitted by your LCD screen resolution, but you won't have Aero.

  Paul

• see the key code is problem

  see the key code is problem

  Hello

  did you purchase your product of these companies like Amazon? If Yes, this isn't a serial number, only a code with which you can request a serial number from Adobe. Please take a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)

  The next part, so I don't see at the very least, ceased to exist on my Adobe website, everything happens in the link above. I leave as an info yet, he could still fit for you. For this purpose, please click your way through your Adobe Store and find the button "get serial number". Fill in the form and after awhile, you will get the real serial number.

  Hans-Günter

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

  Signature of the problem

  Additional information about the problem

  Hello

  1. Once you get this error?

  2 have you made changes on the computer before this problem?

  3. which device is causing the problem?

  Code 31: This device does not work properly because Windows cannot load the drivers required for this device.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Update the driver and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the following Microsoft article.

  The hunt for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  Hope the information is useful.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39. __

  The cdrom did run for awhile... and then he stopped. I googled the error code and it said: ERROR_HANDLE_DISK_FULL
  39 (0 x

  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: SCSI\CdRomHL-DT-STDVDRAM_GH15F___EG00
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000027
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105

  Is there a way to reset the device?

  Thank you... Steve

  Hi Steve,.

  Here's an article that might help: http://support.microsoft.com/kb/314060

  Method One

  1. Completely remove the Upperfilters and Lowerfilters from the following registry key values:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     NOTE: If you get a code 39 message, it may be that additional third-party filter drivers were added to UpperFilters and LowerFilters values in addition to Adaptec filter drivers. In this case, you can try to remove the first non-Adaptec filter drivers, filters Easy Creator by leaving in place to see if the Code 39 goes away. If you still receive an error code 39, 32 or 31, delete Upperfilters and Lowerfilters completely values in the previous key.

  Mark <> Microsoft Partner