Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

Similar Questions

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10. ___

  My driver will not start.  May not be the problem, but it started after I downloaded itunes.

  Hello

  You may need to uninstall iTunes to get the drive working again.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39. __

  The cdrom did run for awhile... and then he stopped. I googled the error code and it said: ERROR_HANDLE_DISK_FULL
  39 (0 x

  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: SCSI\CdRomHL-DT-STDVDRAM_GH15F___EG00
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000027
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105

  Is there a way to reset the device?

  Thank you... Steve

  Hi Steve,.

  Here's an article that might help: http://support.microsoft.com/kb/314060

  Method One

  1. Completely remove the Upperfilters and Lowerfilters from the following registry key values:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     NOTE: If you get a code 39 message, it may be that additional third-party filter drivers were added to UpperFilters and LowerFilters values in addition to Adaptec filter drivers. In this case, you can try to remove the first non-Adaptec filter drivers, filters Easy Creator by leaving in place to see if the Code 39 goes away. If you still receive an error code 39, 32 or 31, delete Upperfilters and Lowerfilters completely values in the previous key.

  Mark <> Microsoft Partner

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

  Signature of the problem

  Additional information about the problem

  Hello

  1. Once you get this error?

  2 have you made changes on the computer before this problem?

  3. which device is causing the problem?

  Code 31: This device does not work properly because Windows cannot load the drivers required for this device.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Update the driver and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the following Microsoft article.

  The hunt for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  Hope the information is useful.

• Problem installing MS LifeCam 2.07-"MsCamSvc.exe has encountered a problem and needs to close."

  Although the WebCam was working before, I had to uninstall the software due to other problems. To re - install the software from the CD, I now get an error message: "MsCamSvc.exe has encountered a problem and needs to close." I updated the new driver on the site of Ms. There is also no yellow or green light on the WebCam after installation and connection to USB port.  I got the WebCam to an electronics store, and they tested the material; This works. Why it will not properly install on my computer?

  Hello

  I suggest try to uninstall and reinstall boot clean and check if it works.

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check these links:
   
  File of Microsoft LifeCam Readme and troubleshooting information
  http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
   
  Troubleshoot failures to find the new LifeCam hardware
  
  http://support.Microsoft.com/kb/929087
   
  Note: He is also involved on your lifecam.

• Error: Windows Media Player has encountered an error when it tried to play music

  Original title: Windows media player

  my pc crashed and I lost all my data. A colleague fixed it for me, but the copy of windows is not validated. However it works reasonably well, except that windows media player does play not any pop music box says that it has encountered a problem. How can I fix this and get my Media Player?

  Hi billybluegum,

  1. it occurs when you play a particular file type or all types of files?

  As Windows is not validated, it may be that some features do not work correctly.

  Step 1: Try the steps mentioned in this article and check the result:http://support.microsoft.com/kb/279242

  Step 2: We recommend that you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A210 - 11 p PSAELE - display driver has encountered a problem

  Hey guys.

  I've updated my display driver at the latest.

  My laptop is the series of psaele A210 - 11 p with the graphics card from ATI 2600HD. Some time ago I got a red screen of death.
  When I rebooted my computer laptop, everything looked different, the Office seemed a bit simpler (color wise etc.; the detail who was in the bar start...)

  In any case, after that, I get rates to around 5-10 on really keen (Microsoft Flight Simulator 2004) when I use it to get above 25 frames per second.

  I'm now using Windows 7 from the original Vista preinstalled. When im in the gameplay, color blocks begin to appear on the screen, scattered on the ground and 3d objects. After about 30 seconds in the gameplay, the desktop freezes and then everything goes black. When my image back upwards again, a message pops up saying that the display driver has met with a problem, or something in that sense.

  So I took it for repair, but the guy said that he saw nothing wrong with the graphics card.
  I also have a laptop cooler but I have to admit, in gameplay it gets HOT.
  I have
  tried to use the robot to pilot of the program to check for outdated drivers, that I might have.
  After updating all the drivers the problem continues to exist.

  Can anyone help?
  Thank you.

  Hello

  In my opinion, the graphics card overheating while game.

  This could be possible if you want to use the non-Toshiba graphics card driver!
  3rd party pages don t graphics card drivers support GPU overheating protection and this could affect the GPU feature!

  I think it's problems because you also mentioned that this laptop gets hot while running a game.

  What to say; back to Toshiba graphics card driver and check if cooling operation modules correctly remove the dust and debris of grilles and fans to ensure better cooling performance.

  Good luck

• Why my Windows XP not download and install SP3 or updates, get the error code: 0x8024400a

  I have a Windows XP laptop and it will not download or install the updates that it says I need to download and install sp3 but it won't either. There is an error message error code: 0x8024400a

  Can you help me

  Older than SP3 Windows XP is not supported, this means that you must have SP3 to get the update.

  Try to run the tool:

  http://support.Microsoft.com/mats/windows_update/

• driver software encountered a problem code is 31

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.__ (Problem code 0000001F)

  Signature of the problem

  Additional information about the problem

  Bucket ID: 562419118

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: pci\ven_1022 & dev_7455

  Configure the class GUID: {4d36e97d-e325-11ce-bfc1-08002be10318}

  PnP problem code: 0000001F

  Name of the driver: pci.sys

  Driver version: 6.0.6002.18005

  Driver date: 11/04/2009

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Hello

  Is the hardware ID - Tunnel of graphics from AMD - 8151 HyperTransport (MC) AGP3.0

  Check with AMD and also Support from the manufacturer of your system and downloads to update or reinstall
  currently the drivers.

  AMD - Contact
  http://www.AMD.com/us/aboutamd/contact-us/pages/contact-us.aspx

  Drivers & support AMD
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ====================================

  Given that this could be caused by a corrupt or drive or another file, you must also run these 1:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP ProBook b 6540 - XP - Intel Graphics Driver Error: GfxUI has encountered a problem

  Product number: WH431PA #ABG
  Model: Probook 6540 b.

  OS: Windows XP Pro SP3 (I've restored Win 7)

  Error: GfxUI has encountered a problem and needs to close<-- happens="" when="" i="" login="" to="" laptop="" or="" open="" graphics="">

  Description:

  After installing windows, I installed the drivers from the supplied CD.

  The Intel Graphics Driver software does not work.

  At the start of the system or if I try and go to properties of the graph, I get a windows error: GfxUI has encountered a problem and needs to close.

  I updated the BIOS and downloaded the Intel Graphics driver from HP website and tried again.

  Error continues.

  Do not know what I do then its an out of the box, laptop and we expect more.

  Is anyone else having the same problem?

  ME-SERVO

  He worked on the fix:

  Re-installation of operating system was going to be my next step, but you have confirmed it.

  After redo the partitions correctly with the free version of Paragon Partition Manager 10.0 and re - install XP DVD provided with resettlement twit drivers DVD provided the problem has been resolved.
  See you soon!

  What I think happened was when I have crashed the Win 7 partition using the XP install process it did not correctly configured it.

  There is a small free space before the partition on which I have installed and the partition cannot be marked as Active. The MBR boot record must getting screwed up. He also scored this partition as number 5 for example: Partition 5 (do not know if it was the cause of many) but after I erase all partitions and repair installation of MBR disks worked.

  Advice to others when go back to Win XP:

  When you roll back to XP using a 3rd party Partition Manager (preferably the last one coz old onse do not work)

  Erase the entire hard drive including the HP_RECOVERY and HP_TOOLS partitions and create the partitions you need.

  I used the free version of Paragon Partition Manager 10.0.

• software device driver has not been installed successfully. Digital Still Camera Canon S3IS

  Hello

  Until recently, I was able to connect my canon S3IS to my PC and the device would be recognized and transfer my photos.

  End of week it last stopped. Vista sees the connection, try to install the drivers and fails to this statement: software device driver has not been installed successfully. Click here for more details. The status of details consult the manufacturer of your device to help get this device installed. Digital camera failed.

  I downloaded all corresponding updates of the Canon for Vista 32 bits website. I tried to plug in the camera to other USB ports. When I plug in the camera to the laptop of my wife (Vista 32) the camera picture is recognized and photos are available. I also took the SD card and used a card through a USB Reader and it recognizes the card reader, it wants to format the SD card, which means that he would remove the photos?

  I have all the current updates Microsoft Vista.

  Any suggestions?

  Thank you.

  Hi richardo79,

  Thank you for your message.

  Here's an article that explains the removal and installation of the drivers.

  I suggest using "manually update drivers" section of this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Problems with USB devices?

  Were new programs or hardware installed near this time?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.

• "software device driver has been properly installed.

  I have a problem connecting my printer hp deskjet 1000 to my laptop (vista). A message appears to say something as the software device driver has not been installed successfully?

  Thanks for your time.

  Try to delete the file INFCACHE.1:

  Windows Vista / USB device detection issues
  http://www.thedave.ca/geek/Windows-Vista-USB-device-detection-problems/

  Also check your cable if its not working properly.

  HP support & divers
  http://WWW8.HP.com/us/en/support-drivers.html

• Peripheral USB MTP are impossible to install. Error: «device driver has been not correctly installed...» Code 31 ".

  I tried almost every answer nothing is done online.

  Both my Canon T1i and my Nexus 7 Tablet does not connect to my office. Raise them the same error message: device driver has not been installed with success, usually with the error "code 31". My laptop has no problem to connect to two devices, and both are on Windows 7. All USB devices non - MTP, as devices and thin USB drives work.
  I tried to uninstall/reinstall device drivers, as well as my host USB in Device Manager. I also looked in the upperfilters registry, but they aren't there. I don't know if it's important, but my Windows operating system is on a different drive than my account "User". I am very close to reinstall my computer.
   
  Original title: any = s MTP USB device failed to install

  Sorry, I'm impatient and re-formatted by the operating system. Works fine now, if it happens again, or determine the cause, that I re-post.

• Do I need to have the conexant modem when I already have internet cable modem. I continue to receive messages from windows that I need to install a driver

  I bought this computer used for the school. previously, the owner used AOL and dial-up. I have cable and a cable modem, so I removed the modem to see State of windows that they needed to install a driver for the computer to work. Also, I have windows 7 on my old computer, but have not been able to install it.

  Hi Crystal, azure

  If you are using a router/cable modem, then you don't need to dial the modem conexant. If you are asked for the driver, then you can either install the driver or, if you want to get rid of the quite conextant modem you can remove the material completely, assuming you know how to do this. Of course, you will have to open your case and remove the conextant modem. For this I guess you have a desktop PC. A laptop would be more difficult to remove the conexant modem, unless the modem is a stand alone.

  You give no details as to your problem of not being able to install Windows 7. More information will be required before anyone can really help you with this problem. An idea of what is happenning when you try to install windows 7 and error messages would be useful; What version of Windows 7 and whether retail or OEM. By the way if you try to install an OEM copy from another PC on your computer then you will obviously have problems like the copy so attached to the first PC OEM installed on the byt the PC manufacturer.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com