Drive DVD SD-R6472 and SP 6000 boot problem

Similar Questions

• Moved from HARD drive on computer newest and stuck in boot loop

  My old Dell computer died.  I moved my drive to a newer Dell computer. I'm stuck in a boot loop when I turn on.  I guess I need to repair or reinstall my windows XP to the new motherboard.  I upgraded from 95-98-XP over the years.  My XP upgrade disk is not bootable.  How to repair or reinstall Windows XP?  I do not think that re-formatting in FAT32, 95 installation, the upgrade to 98, and then upgrade to XP and NTFS formatting are a good answer.

  I have a XP Home edition boot disk (Dell) from the original HARD disk in the most recent computer.  I am able to use it and enter the recovery console, but don't know if I can do something here to repair the installation of XP Pro.

  Thank you

  If your Windows XP upgrade disk is not in Service Pack 3 (SP3), and then create a slipstreamed XP version which includes SP3 and then try to install it.

  Create a "Slipstreamed" of integrating XP SP3 version
  AutoStreamer, it is easy to use and for the most part explicit.
  After you create the CD then do a "clean install", see the last part
  My response.

  Guide auto Streamer and Download Sites:
  http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
  http://fileforum.betanews.com/detail/1092632287/1

  Where to download SP3
  (This file that will be used to created the slipstreamed CD)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Create a version Slip Stream of Windows XP with SP3
  http://www.webtree.ca/WindowsXP/slipstream.htm  (With the help of AutoStreamer)
  http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  You create the slipstreamed CD will not include specific drivers
  for your motherboard, video, audio, network, etc...  Those who you will be
  need to download to your PC or motherboard manufacturing
  Web site.

  How to do a clean install of Windows XP
  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  How to optimize your chances of Windows XP SP3 Setup successfully:
  http://www.PAGESTART.com/windowsxpsp3p3pg8.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.

• V3 - 771g S8 i7. V2.28 BIOS how to disable secure boot mode and allow to boot from usb/dvd

  Hi people,

  Recently my laptop w8 shared with my brother get sick. So I decided to get out the trusty old diagnosis

  USB and dvd, you know, ubcd centos ophrack. Much to my dismay, I couldn't start any of them. So after some faffing

  everything on the net, I was able to boot/secure boot / disabled, which meant I could f12 at startup in the Boot Manager.

  Unfortunately, the drama is over. Kindly listed boot manager internal hard drive, but not bootable usb or dvd connected.  so I thought, I'm going to be cunning and change the boot order of start. Yet once the monster of Bios Acer jeeringly laughed at my attempts to

  take control of the material, I dared try control simply because I happened to pay a substantial amount of money to acer.

  So, it seems, the only option I have left to change is boot/boot mode / (boot uefi/legacy). So what I need to change to restore the boot control, is to change legacy BIOS uefi? Who will install the w8 cack?

  Also what happens if I want to replace the hard drive with an ssd in the near future, is not not to work?

  Oh, I tried to get help from the enamel of acer, their response said essentially bios/uefi is isn't a problem acer because it is sw and realized

  What seemed like a pay per minute service.

  Skills of good customer Acer.

  Any help appreciated,

  Hello..

• I can't clean reinstall my version of vista because my cd/dvd drive is not installed in my bios boot priority. Please can you help me solve this problem?

  (cd ide) not installed in my bios boot

  I can't reinstall clean my version of vista because my cd/dvd drive is not installed in my bios boot priority please can you help solve this problem

  You added a new drive?

  All the drivers are up to date?

  Check the cables for loose connections.

  Is it possible for you to do the following to reload the original Windows installation files?

  Start > all programs

  Select Samsung

  Samsung Recovery Solution

  Select "full restoration".

  -or-

  Restart Windows and the Samsung logo starts pressing F4 to access the recovery screen

  This is a known problem in Samsung - see document - links products are not good

  http://support-US.Samsung.com/Cyber/Popup/iframe/pop_troubleshooting_fr.jsp?idx=43092&modelname=SV0411N&modelcode=

  It is Support Center of Samsung - Re: HDD no detect does not issue

  Click Troubleshoot utility (PS there is a pop up window)

  http://www.Samsung.com/global/business/HDD/

  Samsung also recommend OnTrack Disk Diagnostic. You can make a bootable floppy to advise data with this:

  http://buyonline.Ontrack.com/ecom/fr...file=DC500.exe

  And here is the other programs from Samsung. The creator of the Manager of disc is really of Ontrack and hosted by Samsung. It should work with any brand of hard drive.

  http://www.Samsung.com/Products/Hard...file/Sutil.exe
  http://www.Samsung.com/Products/Hard...Ile/SHDIAG.exe
  http://www.Samsung.com/Products/Hard...il_creator.exe
  http://www.Samsung.com/products/hard...DM_Creator.zip

  (Disk Manager link was not on the Samsung website with the exception of one who asked for the story of your life, but in trying different possibilities with links leading to other files, I finally found one that allowed a download without having to give everything and personal information.)

  ___Taken from the following thread - Elvandil response
  http://forums.techguy.org/all-other-software/254208-Samsung-HDD-utility.html
  
   

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

  Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

  I'm having no problem with my DVD.

  Could you give more details about those who are out of work?

• Long boot time and the gel boot drive selection window

  Hello. I have a problem with my MacBook Pro 13 retina "(2015 at the beginning).

  My mac is about 4 minutes of cranking up about a quarter of the time and it is not related to the problem of the "boot disk select parameters. The computer just hangs before it's anything related to the start-up procedure. It's just a black screen with no interaction with the mouse, no noise and no keyboard input. It does not recognize the 'option key ' (used to get into the disk boot selector) until I pressed it for several minutes, and then the boot drive selector freezes as well.

  I don't have any external drives connected, and already tried SMC reset, reset the PRAM and reinstalling the operating system (normal wipe and wipe any partition).

  I always have Apple Care left. Help, please. Thank you.

  Hi Herojeff02:

  It seems that you have some SSD problems.

  Have you tried to boot safe mode. Try safe mode if your Mac does not commissioning - Apple Support

  You can start in recovery mode by pressing command + R and then using disk utility to check your SSD.

  See the following links: OS X: on OS X Recovery - Apple Support

  Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  If you have Apple Care, I'd do an appointment at the Genius Bar. It could also be a hardware problem.

• My cd/dvd drive no longer works and is not rognized by my computer anymore. How can I reinstall?

  My cd/dvd driver is no longer recognized by Windows XP when I try to play a cd or movie, or try burning anything I get no response from the unit at all.  I tried a system restore but it did not work.  I see the instructions on the internet on how to uninstall and reinstall, but it seems that the device driver is just went and I don't know how to recover or reinstall.  I'm on a laptop HP Pavilion entertainment with Windws XP.  Any help would be appreciated.

  Thank you

  Hello
  1 - do you mean that the CD/DVD drive does not appear in Device Manager and windows Explorer?
  2 did you recent hardware or software changes to your computer before this problem?

  You can try the tool Fixit of the article below and check if that helps.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  You may be interested to have a look at the article below.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641

• DVD disc drive tray keeps opening and closing constantly

  FOR WINDOWS VISTA HOME PREMIUM EDITION

  DVD CD ROM DRIVE TRAY KEEPS OPENING AND CLOSING CONTINUOUSLY - GET COMPUTER TO READ DISCS AT ALL - OTHER ASPECTS OF THE COMPUTER RUN FINE - DIAGNOSIS SAY THAT HE DIDN'T THERE HAS NO PROBLEM WITH ANYTHING.
  IN DEVICES, I NOTICED THAT DEVICE DRIVER IS FOR ARCSOFT - THIS UNIT HAS BEEN IN FOR REPAIR, AND I ME ASKING IF IT WAS CHANGED FROM MICROSOFT DRIVER AND WHY? REPAIR SERVICE DID NOT WARN THIS CHANGE.
  CAN ANYONE HELP.
  SAPPHIRE.

  The device driver can say Arcsoft because it may have provided to Microsoft by them.
  In Device Manager, open the Properties window for the drive, and then click the driver tab, then update driver...  Click the search selection automatically. If it finds a driver, let it install.

  If the drive still cycles, then you can have a bad drive. If it is still under warranty, contact the place of repair for repair or replacement.

  SC Tom

• My dvd rom drive means driver 39 corrupted code and update it just says: pilot

  Original title: code 39

  Slimtype_DVD_A__DS8A4SH___CA11___ please help my dvd, CD-ROM drive is saying driver code 39 corrupt and on the update, it just says driver is up to date, I can't find the download anywhere, it's a slimtype dvd for an aser aspire 5551

  Do you have a cd with the computer that contains the drivers?

  If so, you can go to Device Manager and remove the driver, then use the cd to reinstall.  Or you can go to the Acer site and find the most recent version of the driver, download and install it.

• 23 - a305a Pavilion all-in-one: call for support of HP in Australia / driver DVD replaced and broken again

  Hello

  Does anyone know a phone number for HP support in Australia? I got to a page on the site saying call within hours of opening, but I can't find a number anywhere.

  If anyone knows how to get my DVD driver is working again, it would be even better. He works for a period of time when a DVD is inserted, and then abandoned. The DVD player does not detect the DVD and he himself is more listed as devices and drivers.

  I had the computer 18 months. I had the same problem there (when it was still under warranty) of 12 months and ultimately, a technician is out and replaced the DVD drive. It worked well between yesterday and today but now the alternative driver seems to have developed the same problem. That is why I would call HP to discuss.

  Thank you

  Contact HP Australia via one of the methods on the HP web document to the address following.

  http://WWW8.HP.com/au/en/contact-HP/contact.html

  Use of the DVD drive (optical drive) have a driver. It uses the firmware just like a hard drive. What you are experiencing, is probably the firmware or controller failure in the hardware of the optical drive.

• Boot with Win7 32 bit and Satellite L450-36 problems

  A friend has a laptop Toshiba Satellite L450-36 Windows 7 32-bit which he thinks has been hit by a Virus. He went to use the laptop a few weeks 3 + ago and concluded that it would not initialize. Now, he has 3 daughters who, before this problem, much used YouTube and say that they were able to see updates Adobe Flash Player appear on the screen at regular intervals, but they have deleted the. When he came to talk about the problem for me, I offered to watch the machine that I have some disks that can cure or at least let me save records Paragon Rescue Kit, Avira Anti Virus Rescue Disk, AVG Rescue Disk & others.

  When I turn on the machine I get a screen with boot Toshiba Leading Innovation one
  Press [F2] for INSTALLATION, press [F12] to the lower boot device selection menu. I leave the machine in operation and a window pops up let me the choice of {HD1}, , , but nothing happens when I select one, then I stop the machine and start again, this time by pressing F2 which takes me into the BIOS. I put in a cd, Paragon Rescue Kit 11, arrived on the BIOS and the CD starts. I did the same thing with the Avira Anti Virus system and it found 4 infections. He then lets me copy all my friend (s) files on an external hard drive, which allows me to complete objectives.

  I started the Recovery CD/DVD Toshiba product and I get a Windows loading files message followed by a bar of Microsoft Corporation loading under him and then there is a black screen with a cursor on it. I did the same thing with a system Windows 7 32-bit repair disc and get the same result black screen empty.

  I am retired and to my knowledge has been gained since the Commodore 64 days, then Amiga and PC now, but it isn't enough for me to fix this problem. I found very frustrating to be able to use a Linux program and see all the programs on the PC, but not actually being able to restart it, and start them! I could probably Boot & Nuke the hard drive, but my friend wasn't t provided with a disc of Windows 7 o/s system couldn t so re-installed without buying again.

  I would be very grateful for any advice on how to get rid of the HD1/FLOPPY/NEXT HD window and a solution for the portable computer so that it starts properly. I took pictures of different screens on the laptop that I could pass if they would help.

  In my opinion, you should remove the HARD drive and connect it to another computer and perform low level set in shape and just delete everything. You can use a tool like this and after doing this put back and try to install the original recovery image using the recovery disk.

  In the past I ve never had these problems, but I think it's the best way to remove all the viruses or malicious applications.
  Test it and thanks for posting comments.

• Satellite C660: message: reboots and select good boot device

  Hello

  I dropped the laptop today literally a few inches from the ground, it slipped from my hand as I was placing it on the ground. He fell flat.

  Now I see the message "reboot and select proper boot device."

  I tried a few different options that I read, and I see the HARD drive in the BIOS F2 thing or whatever it is called. If it is recognized, but I can't seem to move in the message. Any suggestions?

  Thanks in advance.

  PS I will need clear instructions, I'm not stupid, but I need to explain. I don't understand some of the pieces.

  Thank you

  Hello

  I think that your HARD drive is bad.
  I think that you have not checked it correctly in the BIOS.

  Please go to BIOS once more, by pressing F2.
  Now on the first page, you will see date, time, details of CD/DVD drive and you should also see the details of the disk (size, name)
  You see that?

  Otherwise, the HARD disk is not initialized by the BIOS and this means that, because of the fall, the HARD disk has been damaged.

• Something to access DVD/CD player and then locking the computer

  Original title: something is tryng to access my DVD/CD drive and then boot me as I do not connected, the screen is locked, but when I enter my password everything comes back as I'm logged in

  This can happen at any time, I hear my CD-ROM/DVD-Rom partition and the drive light lights, then I look at my screen and it's back to the page except it says connect locked, I get my password and need me just my top office and all my programs that were open are still there like nothing happened. How can I fix it, I used all the services troubleshooting and does nothing with this problem.

  Hi LorraineAiken,

  ·         Have you made changes on the computer?

  ·         What version of the operating system is installed on the computer?

  ·         Are what store you referring?

  ·         You get the error message?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow the link step 7 to return the computer to a Normal startupmode.