Long boot time and the gel boot drive selection window
Hello. I have a problem with my MacBook Pro 13 retina "(2015 at the beginning).
My mac is about 4 minutes of cranking up about a quarter of the time and it is not related to the problem of the "boot disk select parameters. The computer just hangs before it's anything related to the start-up procedure. It's just a black screen with no interaction with the mouse, no noise and no keyboard input. It does not recognize the 'option key ' (used to get into the disk boot selector) until I pressed it for several minutes, and then the boot drive selector freezes as well.
I don't have any external drives connected, and already tried SMC reset, reset the PRAM and reinstalling the operating system (normal wipe and wipe any partition).
I always have Apple Care left. Help, please. Thank you.
Hi Herojeff02:
It seems that you have some SSD problems.
Have you tried to boot safe mode. Try safe mode if your Mac does not commissioning - Apple Support
You can start in recovery mode by pressing command + R and then using disk utility to check your SSD.
See the following links: OS X: on OS X Recovery - Apple Support
Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support
If you have Apple Care, I'd do an appointment at the Genius Bar. It could also be a hardware problem.
Tags: Notebooks
Similar Questions
-
How can I get a boot drive for windows vista
How can I get a boot drive for windows vista
Hello
Here's how to do a startup, vista etc disc repair
It is NOT a reinstall drive
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
How to reinstall Vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?
Hello
Detect and automatically fix problems of CD/DVD
http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFCPlease make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Is anyone having problems with the Times and the Sunday Times App
Im having problems loading from the Times and the Sunday Times app. Before I launch into a major description (I have Parkinson's disease, and typing is slow) is there a known issue with the application at the present time
There has been a lot of problems with this app as soon as they have a clear, the other seems to appear. Take a look at this link and it followed in areas where you are affected by.
http://www.thesundaytimes.co.UK/Sto/multimedia/archive/00258/Helpguide_stripped _ _258975a.pdf
-
shut computer down, restarted my time and the date has changed
shut computer down, restarted my time and the date has changed. My date always gose for December 31, 4001. Goin whats?
Hello
Date and time incorrect after restarting is usually the result of a dead of the CMOS battery. You may need to contact the manufacturer of the computer for help on this issue. -
I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.
Hello
1. do you get any error code or error message?
2. what day you installed recently?
It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.
Follow the steps to uninstall and re-install the drivers.
a. click on start toreduce this includes this im and then click Control Panel.
b. click system and Maintenance, click Systemand then click on Device Manager.
Note If Control Panel is in Classic view, double-click System, and then click Device Manager.Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.
c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
d. When you are prompted to confirm that you want to remove the device, click OK.
e. restart the computer.
If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.
Hope the information is useful.
-
Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Try installing Adobe Illustrator, but it gets stuck at 42% and nothing happens. Tried 10 times and the result is the same. I leave the creative Installer and start again and try to download and then it stops. Any ideas what I could do?
If mac, delete the contents of your tmp directory and try again.
If win, delete the contents of your temp directory and try again.
-
I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not
My guess is that you are in multitrack view and not editview
These fx are destructive and only take effect when you change a single audio file in editview
-
Creating a rule entry time custom to read the start time and the stop as entry time
Hello world
I hope this is the right forum to post this question.
We are putting in place the time and work package, and we need to write a few rules of the time for this entry.
The first of them is to have a rule that validates the start time and the stop time has entered the entry-level feature Self Service scorecard.
So, I created a formula to achieve this objective. This formula eventually calls a PL/SQL function that checks for card points, the Start and Stop time values stored in the database.
However, this is not what I intend to achieve. What I have to do is to get the value of time as she walked and apply the Validation
This expansion in a scenario:
1. the employee connects via the Self Service and access the timesheet feature to make a time entry
2. on August 20, he entered 13:00 as the start time and stop time 20:00
3. click on the button
When he clicks on the button Save, (assume 20:00 is an incorrect time), an error message should be displayed to the user informing him of this
----------------
Now, I have to spend the early hour 13:00 and the 20:00 in the formula stop time so that I can post it.
This is where I run on issues that I don't know how to get these start and stop within the formula time
Grateful if someone could help with this.
It's quite urgent given the lead times for completion on that.
Thks in advance folks
Ravil_timecard_info: = hxc_self_service_time_deposit.get_building_blocks;
l_building_block_attr_info: = hxc_self_service_time_deposit.get_block_attributes;However, I do not understand this:
If there are no parameters that are passed to these calls, then how the correct score card to be recognizable? I'm assuming that there is something like a Timecard_Id or setting Timecard_Ovn that allows to identify the correct sheet when reading this info.Pls advise me on this point, because I'm just not understand this bit.
You do not need to pass all parameters. The overall picture of pl/sql is filled for the session before the rule of time entry. If you want to restrict, the formula will be an id_ressource of entry which is an employee self-service Person_Id. and compare this value against id_ressource in l_timecard_info.resource_id
If this isn't an inconvenience for you, I want to understand how these function calls to keep the start time and stop time, and to access these variables, I would need to loop as a table through?
The l_time_card_info of pl/sql table is filled exactly the same as how is stored in HXC_TIME_BUILDING_BLOCKS when save is saved / submitted. It's just that the pl/sql is here filled.
-
How can I change the default DVD drive in Windows 7 pro?
How can I change the default DVD drive in Windows 7 pro?
The following did not work.
1 Control Panel / autplay
It only allows me to choose media player or nothing2 Control Panel / default of programs
-file types associations do not change the automatic boot to DVD drive
-the default programs watch only with no. microsoft applications add option application
-access and default computer program; This made a mess when I tried not microsoft!3. computer / rt - click the device DVD did not help there is no command 'open with '.
You might have switched to the control panel view all items.
Click Start > default programs and click Change AutoPlay settings. -Ramesh Kumar http://www.WindowsValley.com -
Incompatible with the controller hard drive for Windows 10 update
After 4 TEC, I was able to update Windows 10. Now the report of compatibility for my computer says that my hard disk controller is not compatible with Windows 10. I have Windows 7 and its been running pretty well with some minor problems. When I go to search for drivers or windows updates, it seems to continue indefinitely and do nothing. Not sure if that has anything to do with the controller, but I thought I would include this information.
The latest technology suggested that I go to my local IT guy... funny, considering it's my computer at home. What are my options? Or someone has an idea how I could get the controller fixed my own? Or should I consider 10 Windows a lost cause and wait until I get a new computer? Thank you!
Hello! Thanks for the reply. I've updated driver for the controller, and the next day was 10 Windows in my Windows Update. I opened it to the top, and it worked! Now have 10 Windows happily running on my computer. Thanks for the information!
-
How many workstations can connect and use a hard drive in windows 7 Professional?
How many workstations can connect and use a hard drive in windows 7 Professional?
Thank you
Randy
Original title: Windows 7 Professional Log In
If my memory serves me, 10 is the professional for Windows Server limit.
-
With the Firefox 4 RC, the 'open in a new tab' and the 'open in a new window' - buttons have changed places. This is quite annoying because I normally do without looking, but now it always opens in a new window instead of a new tab. Is it possible to restore it? Perhaps in your own settings?
You can use the menu editor extension to reorganize menu items - https://addons.mozilla.org/firefox/addon/menu-editor
-
I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down. The person who sends me emails is also with MSN. Everyone knows this? Thanks for your help.
Thank you for visiting the Microsoft answers community.
The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.
Maybe you are looking for
-
Hello I need a file *.seproj in the *.lvproj file. Someone send me this file and asks me to watch it, and I'm not able to open this file. I have labview 8.5.1. If someone can change this file which would be big or made me know how to open this with 8
-
Digital inputs delivered to 0 when all loop stops. Extract attatched
Could someone please tell me how do I get my digital inputs on the left hand side reset to 0 when the loop Gets the signal to stop? Very much appreciated
-
HP Pavilion tx2510us hardware problems...
My tx2510us is suddenly having problems of material... just had it for about 2 weeks... and it was working fine... 1. my keyboard does not work... (I tried to type, but no response... all the keys in the keyboard does not work) 2. the wireless switch
-
Hi guys, I'm trying to create a structure similar to my request, is that when I tried to use VerticalFieldManager to layout fields, he has shown problems, as the first part of the grid that does not, painting some pblms. But when I use the Manager, w
-
Associate an e-mail program to perform the desired task
I get this error message when I try to click on a link to another part of the article l I have aol and Hotmail e-mail services. I tried for weeks repair what can help you please?