drive encryption BitLocker could not recover abruptly ended conversation

Similar Questions

• BitLocker could not be activated (with or without TPM)

  Hello
  I am evaluating the RTM of Windows 8 Enterprise of 90 days and you want to activate the full disk encryption. Unfortunately, Windows won't let me. I have a Dell D630 with integrated TPM v1.2 chip. At the start of the verification of the system (just before the start of the encryption process), I get the following error message:

  BitLocker could not be activated

  The Bitlocker encryption key could not be obtained. Ensure that the TPM Module (TPM) is on and ownership has been taken. If this computer doesn't have a TPM, check that the USB is inserted and available.

  C: is not encrypted.
  
  
  I had a peek in tpm.msc and status displays "the TPM module is ready for use. While searching for a solution in the web, I met several tpm.msc screenshots where the State had "TPM is ready for use and rights of ownership of the TPM secure was taken." Well this is rather well the error in the first place.
  TechNet has even distinguish the online instructions on taking possession of your TPM. Apparently, I need to initialize TPM according to the instructions. The problem is, I don't even have an option to boot available in the action menu on the right of tpm.msc.
  Well - I thought - if TPM behaves badly then just turn off and follow these Technet instructions on how to enable Bitlocker without TPM with the help of a USB key to decrypt the PC at startup...
  No luck either... after the system check, I met the same error message. Can anyone enlighten me on what I am doing wrong please?
  Cheers, Marcel
  P.S.:
  TPM is enabled in the BIOS
  BIOS is up to date
  Windows driver and TPM is up-to-date
  I have no problem of booting from USB (in fact I installed Windows like that)

  Hello

  The question you posted would be better suited in 8 Windows IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads

• After the upgrade of Windows Windows 7 10, could not recover my product key.

  Original title: windows 7

  After the upgrade to windows 10 windows 7, could not recover my product key. When I connect my system am get notification that you may be victim of software counterfeiting and copy of windows is not genuine. you do me too much this error code. 0xC004F057. Please help me to recover my product key. my windows does not work after the upgrade as well.

  I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• could not conform as end of file unexpected found... Can I do?

  could not conform as end of file unexpected found... Can I do?

  The file you are using is visibly damaged, please specify how or where you got this message!

• BitLocker: Could not complete the requested operation because of...

  Two days ago Windows 10 was running on my laptop. BitLocker has been on two disks (D and E). For some reason, I have formated Win 10 and do a new install of Windows 7 Ultimate. After installation, when I unlock the drive D, it works very well. But I can't unlock the E drive. When I enter the password, the message "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."
  I'm sure that the password is correct at 100%, but I do not have any file recovery. Can someone help me?

  Hi NooriSAN,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot unlock a drive locked by Bitlocker key and get error message: "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."

  This could be if defective media stored on database security, or a program in the security software error has caused corruption on disk.

  For reference I suggest you to return the items mentioned below.

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Overview of BitLocker Drive encryption

  What are the main issues for Bitlocker?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Install Windows 8 on external drive Thunderbolt - Windows could not prepare the computer to begin the next phase of installation

  Hi all

  I'm at my wit's end trying to install windows 8. Let me start at the beginning: I used to have windows running on my Mac Pro ssd internal 8.1, installed via bootcamp. It worked well for a while, and then refused to start, gives me a blue screen KERNEL_SECURITY_CHECK_FAILURE. Despite some advice from lonely T, I was unable to fix and ended up wiping the partition and relocation, again via bootcamp. Yet once again, it worked for a few months, then the same problem. I made this one last time, and it only lasted 2 days... So I gave bootcamp.

  I think that the hybrid MBR partition scheme that implements bootcamp is the culprit, but I don't really have evidence to substantiate this claim. In any case, I tried to install windows in EFI mode. (If I understand correctly, the hybrid MBR is set up to allow windows to install in legacy BIOS mode, but that windows 8 may now install efi, which supports my Mac Pro mode.) My Mac is the new Mac Pro (end of 2013, trash in shape), and I can say short UEFI 2.0 (I have the latest efi update from apple installed).

  The method I'm trying:

  1. create a new partition in HFS + on my external drive using disk utility. The drive has now it's efi partition and partition empty 750Go I want to install windows a 1.25 TB storage partition that I use with my mac. It has a GPT. I formatted HFS + and no FAT, because I think that disk utility creates the same hybrid-MBR as training camp every time a FAT partition is created.

  2. use gdisk to confirm that the disc does not have a hybrid-MBR. (sudo/dev/disk1 gdisk watch MBR: protection)

  3 restart my mac and hold the possibility to put in place to bring up the boot efi menu.

  4. Select the EFI_Boot DVD icon (that's the windows 8 install dvd that I have in my superdrive USB drive)

  5. go in the menus of the disk selection screen installation and delete the partition in HFS +, I created to install windows on (the format option is not available)

  6. now select "Unallocated space" on the good drive and click Next.

  The problem:

  Partitioning seems to go ok (there is no feedback on this basis, but it proceeds to the next screen, and all new partitions expected are there if I check diskutil list later). He said it is "copy of windows files", but then stops with the error "Windows has no prepare the computer to start the next phase of the installation." To install Windows, restart the installation. "If I restart, I can start the same process all over again and get the same result.

  The Question:

  How I get this error and get windows install?

  Extra pieces:

  • The first time it happened I assumed it was the new sip / thing "without roots" in El Capitan, causing problems, then I disabled, but I still get the same error.
  • After reviewing the diskutil list output after one of installs it without success, I found that a labeled EFI partition has been created after my storage partition (the original efi partition was still there in the upper part of the disc).
  • I have windows 8.1 installed now bootcamp on my internal ssd. It was planned to use it and winToUSB to put windows on my crush, but I found that it only works with usb2. I do not have installed could cause problems with the installation on another disk.
  • Before say you I can't run windows on an external, yes you can, and many people have. I read windows sees thunderbolt internal disks.
  • I read a few other posts on this and other sites on this problem, but could not find a pertitnant solution to my situation. I found one that suggested to remove the efi on my disk partition, but that seemed like a bad idea, so I didn't try.
  • I write this at 1 in the morning after a day spent in front of the computer trying to get this working, so please excuse typos typing or other. I am pleased to provide you with any pertinant information helping you will help me.
  • Thank you!

  The other thing I tried also almost succeeded:

  Although I prefer to get the method above works, because it seems the most promising, is something else, I've tried that I thought worth mentioning. If you offer advice pertaining to this method rather than the above, I would appreciate it if you could explicitly declare that at the top of your answer. Thank you.
  

  I tried to install windows on the physical disk using vmware and virtual box. The instrutctions I followed for this can be found here: http://www.andrewsavory.com/blog/2011/2156 (the only thing different, it's because it's on an external drive, I created the Fat 32 partition manually using disk utility). The first time (using vmware) installation seems to go off without a hitch, but I couldn't get my computer to see the windows partition as bootable with the boot efi menu hold-option regular refined or with system preferences-> startup disk. I think that I was using always inadvertently a hybrid-MBR at this stage. I tried to repeat this new beginning with the first two steps above to avoid the hybrid-MBR. But now when I try to create the virtual machine based on the gross vmdk, it starts to copy the files then says not sufficient permissions and fails. I don't know if it's a permission with the disk or the hard problem. I tried chmod 777 and chown $USER of the vmdk disk (/ dev/disk1s3) does not.

  Wow, that was a long post...

  1. when a second drive is detected by the Windows Setup program, he wants to create his own brand of EFI (104 MB) and not to mess with the Mac EFI (200 MB). You can force it to use the EFI to the Mac using Diskpart commands.

  2 instead of HFS/FAT32, create a piece of 750 GB free space and it should only get a new MSR/MSD, without the part of EFI.

  3. on your VM method, the link you have is quite old. You have a MP 2013, with references to the 2010 Mac alumni and is a bit too archaic to be useful. http://forums.macrumors.com/threads/install-a-Windows-7-partition-on-Mac-OSX-Wit hout-optical-car-or - usb.1836959 / #post... seems to work for many and can be useful for a test. It also uses Winclone.

  4. you can also try http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .

• Display driver stopped working, does not recover...

  HP Pavilion dv7-6015tx

  Windows 7 32 bit

  ATI Radeon HD 6770 m

  Hello

  I thought I had solved this problem before, but it persists today.

  A while back my pc would freeze and then recover, with pop - up saying dialogue

  "display driver has stopped working and recovered."

  Now, it does not recover, it remains just frozen.

  This does not happen when I come back to the graphics card Mobile Intel.

  It freezes when I use AMD ATI Radeon.

  My PC freezes when I lead average graph low load.

  (I watch YouTube videos via the media player and internet browsing)

  This means that I'm not hardcore gaming, however when I'm hardcore gaming my pc does NOT freeze.

  I have the latest software/driver graphic HP provides me with.

  I can't install ATI, because everything I download from there, says it's not compatible with my device.

  I also think that sometimes my pc is overheating.

  I have HP CoolSense set for maximum cooling, however I think that this is not enough. (blue screen of death)

  I tried SpeedFan software of third party temperature sensor that automatically adjusts the fan speed.

  However, I don't think that the software is compatible with my motherboard because it can read my fan RPM speed.

  I think it's the GPU causing overheating because the CPU is 50 degrees celcius at an acceptable (?).

  This is a new laptop, so there is no collection of dust or debris in the exhaust gas.

  I would like to update my graphics driver, there were no update driver since the: 2011-05-06

  Also, I would like a method to increase the speed of the fan, preferably both GPU and CPU

  to lower the temperature and components

  Even as I write this, now I got force restart the computer because it froze. (driver has stopped working)

  I realize that the graphics driver may not be the only problem

  or it may be another problem, disguised as a problem of the graphics driver.

  I am willing and pledged to use all means, (with the exception of a full recovery of my pc)

  to fix my current misadventures with my laptop.

  Kind regards

  John

  You must first update the latest version of the BIOS of your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-96635-1&CC=US&DLC=en&LC=en&os=4063&Product=5085756&sw_lang=

  Once you update to the latest version of the BIOS download and install the following softpaq and this should solve the problem:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-95106-1

  This should solve the problem.

• Had to reinstall CS2 in new computer Win7x64. Old hard drive of the computer is dead. Could not recover. Cannot enable reloading of CS2.  Any suggestions?

  I recently had a Win7 computer down and I decided to buy a Win7 upgrade solid x 64 computer.

  Reloaded all my apps I had on the old pc (couldn't use the old hard drive.  He's dead!  New system has SSDS)

  Each top-up went fine except for my CS2 software.

  He said that I had to activate my software.  Not much so I tried via 'internet' and received a window "Activation Server is not available".

  So, I went "Phone Activation" and got a window with my serial number and an activation number, with the Activation Type: Normal 24:24

  He said to call 866-772-3623, which only said to go to www.adobe.com/go/activation everything which was take me for an explanation of the activation page who basically told me to do what I had done in the first place.  for example, no help at all.

  I tried the direct number: 206-675-6222.  (The number was disconnected)

  So my question... How can I get an activation code of my CS2 software?  Where should I go, either by phone or through the net?

  You need to acquire a special version with its special activation code.  See the following...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Need Intel display driver ialmrnt5. Could not locate.

  My pilot ialmrnt5 display works like my golf swing on the tee. Not at all. I can't find an update or replacement. Here are my stats: IntelR computer, model manufacturer = AWRDACP1, type = X 86 and purchased at Fry pc in 2004 about.  Intel Graphics Controller Intel (R) XP, Windows 7, 82865 G video bios 2972 version 1024 X 728 TrueColor 60 Hz mode, display driver = ialmrnt5 central controller for Intel graphics driver version 6.13.10.3510 4/14/03.

  Error: ialmrnt5 display driver does not. Screen goes crazy and I so need to start. Videos Live and stored play fine. On live animation online, games of group participation does not work then I get the error.

  Is this enough information to look for an answer on an update or reinstall? Don't know what else I can say except that it was a fruitless search for 6 weeks. Thanks for the tips.

  For the Intel® driver update utility
  Identify and find drivers automatically
  http://www.Intel.com/support/detect.htm?IID=dc_iduu I hope I could help

• Open doc CS4 CS5 = close unexpectedly, could not recover, Untitled can be damaged

  Hello gods of Adobe InDesign.

  Help, please!

  OSX 10.5.8, CS5 - updated.

  We have a number of documents in CS4 that don't open in CS5... that gets us very concerned. So far, we have tried to reset the InDesign CS5 preferences without success.  Save the CS4 document under a new name... without a bit of luck.

  Will try to export to the XML file in the morning... If this works... what is the problem with our CS4 framework?

  Details of what's going on...

  (1) try to open the CS4 document... The application InDesign quit unexpectedly.

  http://i559.Photobucket.com/albums/ss37/TonyHeslington/Mac%20-%20Adobe%20-%20In%20Design/I D1.png

  (2) adobe InDesign AutoRecover is not the last time he tried to open the document "without title" you want to recover, "Untitled", once again? - ... Untitled? What is?

  http://i559.Photobucket.com/albums/ss37/TonyHeslington/Mac%20-%20Adobe%20-%20In%20Design/I D2.png

  (3) open anyway, why not.

  http://i559.Photobucket.com/albums/ss37/TonyHeslington/Mac%20-%20Adobe%20-%20In%20Design/I D3.png

  (4) the application InDesign quit unexpectedly.

  http://i559.Photobucket.com/albums/ss37/TonyHeslington/Mac%20-%20Adobe%20-%20In%20Design/I D4.png

  (5) CS4 opens without a problem.

  http://i559.Photobucket.com/albums/ss37/TonyHeslington/Mac%20-%20Adobe%20-%20In%20Design/I D5.png

  Your help is appreciated.

  Tony Heslington

  Best practices: open in CS4, exporting to idml, that open in CS5.

  (Option 2 (not recommended, should not be necessary), export to inx CS4.)

  I would be surprised if this doesn't fix it for you, you should not receive the issues that you, but it is a very good way around most of the problems like this.  Could be a plugin or something that you use?

• Encryption BitLocker - TPM not found 2540p

  Hello

  I have the same problem, could you tell me how you did a scan to find the new driver after removing the wrong driver?

  Thank you.

  Nobody here actually:

  https://support.Microsoft.com/en-us/KB/2895212

  I have the same problem with windows.

  Thank you.

• RemoveAllEventHandler() could NOT put an end to events

  Hello

  I met a problem when I debug my C++ program for a data PCIe6361 acquisition card. Could you please help me?

  The application that we need is to acquire redeclenchables analog input signals for a specified number of cycles. According to your example available online program, I managed to achieve this goal: the components in good condition worked already pretty normal by reading all the data out in the outStream, which could then be saved.

  However, I found that the program is stuck to the 'RemoveAllEventHandlers()' function when I tried to stop the task. The function will not do its job, and the process continues to run forever. I myself remember that this function perfectly worked well when I tested it for a task simple start-triggerred. So, I thought that this is the sequence of my functions 'stop process' which give rise to this problem. I tried the variant of the sequence, but no improvement still. I wonder if it could be a systematic bug in the inner workings of the map, or I missed some important steps during the shutdown process.

  The essential parts of the program are displayed as below, please advise me what to do! Thank you very much!

  Wei

  Thank you very much for your answer!

  I tried some of the idea of our days, but still none of them seems to be the case. Fortunately, my colleague mentioned there are a few sections using 'measure studio' talk «InstallEventHandler» I realize that regarding the execution of RemoveEventHandler(), I actually includes the 'RemoveAllEventHandler()' and "-> stop() m_task" insdie the OnEvent(), which seems to violate the rules. I then clear upward and the return to normal program.

  Thanks a lot again!

  Wanchun

• Driver Installation Failed: Could not find media device for this driver

  I have a HP with Windows Vista (32 bit) dv6646us and have had a problem with the audio device. The sound works sometimes, but above all the system does not even recognize the audio output device (in this case, I see the speaker icon in the taskbar with a cross mark). Another model is that the laptop does not recognize the audio device, but no sound is produced (in this case, the "speaker" icon doesn't have the cross mark). When the system has at least recognize the audio device, I can solve the problem by using the Microsoft Fix it 50131. However, when the system does not recognize the audio device, nothing seems to work. When I go into Device Manager, there is no sound, not just a pilot section. The laptop is supposed to use Conexant High-Definition Audio Driver, but when I try to install it, I get the following message: failure of the driver Installation: Media not found device for this driver.

  In another forum, someone has solved the same problem in a system with the 32-bit version of XP by downgrading his memory from 4 GB to 2 GB, based on his knowledge that a 32-bit system cannot take 4 GB of RAM (it has started having the problem after that first, he upgraded the RAM from 2 GB to 4 GB). However, I don't know if the same applies to my problem because the sound system sometimes works with the current system with 4 GB of RAM and also my laptop is supposed to hold up to 4 GB of RAM (and he does not the 4 GB of RAM). So, I was wondering if there is another possibility for a cause and a solution to this problem.

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         Do you think the audio device when there is no X on the volume icon?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can follow this section "By my speakers is crackled or distorted" in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2:

  If the previous step fails, uninstall and reinstall the audio drivers completely, follow the steps below:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in r management device, right click on audio and its driver and click on uninstall.

  e. install the last driver audio drivers on the manufacturer's Web site.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• WD My Passport external hard drive appears as drive F:\, but could not find the music in iTunes

  I have a WD My Passport which appears as drive "F". I use this for backup of music & photos etc.  It seems to be is no longer working and it asks me to format it, I tried, and windows is unable to do.  Problem is that I now have a lot of music in Itunes which is no longer available as original file is not found. Does anyone have ideas how I can return this music?

  If you left click the drive letter 'F'... it displays the
  Directory of your external hard drive WD My Passport?

  WARNING! Formatting will erase your files. WARNING!

  See the following article from WD on formatting:

  How to partition and format a drive WD on Windows (7, Vista, XP) and Mac OSX
  http://wdc.custhelp.com/app/answers/detail/A_ID/3865 The following links to Support WD may be worth a try:

  Forums Community WD (external drives)
  http://community.wdc.com/T5/WD-external-drives/CT-p/external_drives

  WD knowledge base
  http://support.wdc.com/product/KB.asp?lang=en

  WD E-mail and phone support
  http://support.wdc.com/contact/index.asp

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1