Drive external DRIVE will not appear in the computer, only in the device Mgr?

Similar Questions

• My CD/DVD drive will not appear in the Device Manager, but present in the BIOS.

  DevCon didn't find it. It will not open even if I don't get to Device Manager and check for changes to the system. I deleted the registry entries upper and lower limit. Any other suggestions? For additional emphasis, he does not show even in the Manager of devices so I cannot restore or reinstall the drivers from there. It might also help that I use Vista Home Premium on a Compaq Presario F755us.

  Hello

  (1) does the BIOS see the main hard disk drive or a secondary hard drive?

  (2) remember to make changes to the computer before the show?

  You know may not be not that most systems are set to show only the splash screen. If you go into the BIOS Setup, it should show the disks that have been detected on two primary and secondary IDE channels.

  Note: the basic procedure to change the setting of the disk controller is to restart your computer and enter the system BIOS. The most common method is to press F2 to enter Setup, (another PC may use a different key). On the BIOS screen, find the setting that offers the AHCI, ATA or IDE and RAID. If the parameter is set to AHCI, change the setting to ATA. Restart the PC on the Windows installation disc

  Warning: Incorrect settings in the system BIOS can cause your PC function incorrectly. If you are not familiar with the configuration of the BIOS of the system, you must contact the PC manufacturer for assistance.

  Try the steps in the following article and check if it helps.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  You can also check the following items.

  CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista: http://support.Microsoft.com/kb/929461

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk: http://support.microsoft.com/kb/952951

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• my external cd will not appear in the finder or on the desktop.  I went into preferences for the finder and intended to show the CD, I can load a blank cd and iTunes says and I burn on it then the cd will appear on the desktop.

  I don't see my external cd in the finder under devices, I can load a blank cd and iTunes says it's white and I can burn songs, then the cd icon appears on the desktop, went into preferences for the finder and ticked the box show the cd.  Help please?  CD has been disconnected and placed back started loading but no show, iMac says he had an attached cd when I search.

  CD/DVD players don't appear that a disk is inserted. It's normal.

• USB drive will not appear in the finder, but is OK in disk utility

  My "music backup" external USB 1 TB SSD showed in the Finder, until a few days ago, when he disappeared. I tried dismantling and Assembly of the command line. The said command-line editing is successful, but I still don't see the drive in Finder.

  If I go into disk utility "First aid" reports no problem. The drive is formatted for OS X.  If I right click and say "Open in the Finder" I can see all the folders and even drag in the sidebar where they work, even after a reboot. I can't see the drive at a higher level.

  How can I fix it? I guess a solution would be to create a folder called "Music disc" and then move all files on the disc in it and then put it on the sidebar, but it seems silly. How can I get my hard drive appears again in the finder.

  PS Si I use a third-party file manager, such as ordering a PRO, the USB drive is available for selection in the drop-down list of disks attached.

  Help!

  The Finder, choose utilities go to menu, open the Script Editor and run:

  the shell script ' chflags nohidden ' / Volumes/VolumeName /'.

  put the name of the drive where is VolumeName.

  (142676)

• my external hard drive will not appear in my computer although it shows in Device Manager. It was working fine last week, so any suggestions would be great.

  I tried to restore my laptop computer and uninstall the hard drive. still can not open it.

  Try these:

  go to sart
  Right click on my computer
  Click on manage
  Click Contine to UAC prompt
  then click on storage
  then click on disk management
  then right click on your device and select Add letters and the path
  window pop up, and then click Add
  her select an alphabet and click ok

  I hope I could help

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• RAID DRIVE WILL NOT WORK IN THE MEDIA LINK BROWSER

  I have a RAID 5 drive connected to my MACPRO (MacPro5, 1), OSX 10.9.2. His work correctly on the BONE. In first Pro CC I can import files from it no problem, everything seems to go well until I try to link the media about him. The link media browser will not access it. I can see it, I can see the icon of RAID, but it will not access the files.

  Media link Explorer it will not appear on the list of the local drives on the left pane. When I double click on local hard disks, on the right pane, I can see the RAID HD icon, but when I click on it it won't open it. He knows its there, but can't access it. I don't understand. I can import files, etc., but not to link the files. I have to redo the entire sequence with the files of this RAID drive and its working days.

  I'd appreciate a lot of help with this problem.

  After moving all about the RAID I completely erased the disc.

  I reformatted it and moved all the data on it.

  Now, it seems to work.

  Not a good solution (because I do not know if the problem will resurface for a reason any)- but at least it's working.

  Here at least I know to test the new drive with the media browser before copying tons of data on it.

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer.

  I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer. Device Manager indicates that they are working correctly. Sometimes my dvd drives disappear. I have to do a system restore to solve this problem. For some reason any Win7 has problems with storage devices. How to stop these dissappearing from my Computer(or not getting a drive letter assigned) storage devices?  It's very frustrating. And, System Restore is not a way to solve this problem, it's just a quick fix. I have three internal hard disks, three hard drives, card reader external drives, USB keys, disks, etc. I need a way to solve this problem when it happens. So far, happened about 9 times in the last six weeks since I installed Win7 64 bit ATU.

  There may be an update of the motherboard BIOS to solve the problem.

  Otherwise, as your card readers are no doubt attached via USB the usual way to solve this problem would be to uninstall the drives and the USB controllers and devices in the system restore.

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• Webutation extentsion will not appear in the toolbar

  installed webutation extentsion... will not appear in the toolbar...

  I checked the Webutation extension and this extension is broken because it uses a function (quote() to quote a string) that is no longer supported in Firefox.

  This is not a bug in Firefox, but a bug in the extension and thus must be fixed by the creator of the extension.
  You can point the creator of expansion on the subject if you wish.

  I don't know for other extensions, but they can be broken as well and you will need to check the Console browser (Firefox/tools > Web Developer) for the error messages.

• How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  kochetova01 wrote:

  How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  Go to the message - details - do not disturb - off