Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

Similar Questions

• In a work previously Win 7 Pro Shuttle system, we are now "this device cannot start (code 10)" with high defination driver.

  The system with the problem is a shuttle G2 7600 with Windows Home Premium 32 Bit, AMD Athlon II X 2 ' dual core 2.9 HZ.  The sound is integrated 5.1 audio channels.  This works installed sense July 14, 2011.   We now have no audio.  After the properties of the device, see the "this device cannot start (code 10)" someone can help me with this problem?

  Hi Jack,

  You did changes to the computer before the show?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you try the steps from the following link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/en-us

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Headset (headphones and microphone) USB - this device cannot start - Code 10

  Hello

  I just bought a USB headset today and tried to use it.  I had a driver error message when first plugged in.  The help system has proved to be unnecessary.

  After doing some research on this forum, I checked the Device Manager and found that the indicatses of properties of USB audio device "this device cannot start. (Code 10) ".  Forum entries suggests that a lot of people have similar problems.

  Mine is a new installation of 64-bit Windows 7 on a new hard drive, but on older hardware of the PC - Asus A8N SLI Premium.  Someone at - it had suggestions as to the resolution of the problem.  Note that a normal headset worked fine yesterday (but I broke it) plugged into the jack Sockets, but I wanted to use a USB headset to avoid having to continue to go to the back of the computer to replace my system 2.1 speakers.

  Thank you

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link below and check if it can help solve your problem.

  http://support.Microsoft.com/kb/943104

  Please reply back and let us know the status of the issue.

  Azam - Microsoft technical support.

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• This device cannot start (Code 10) - referring to the CD-ROM/DVD-ROM internal drive.

  Since yesterday I get the message above regarding my internal CD on my Acer laptop drive.

  The PC is barely over a year old & the Cd-Rom works fine up until now.

  I recently moved from Windows Vista Home Premium to Windows 7 Professional (about 2 weeks ago) and the CD-Rom drive has been used successfully to restore all my backup files that W7 is a new installation (not an upgrade).

  I removed the CD-Rom drive (a device slimtype DVD ADS8A2S Philips - Lite-on according to its label) and have re-connected it, but it still does not work.

  Windows seems to see the device when I say add a device, but when he tries automatically configer it I get the message "there is a problem with the driver for Slimtype DVD A DS8A2S ATA Device. "Reinstall the driver may resolve this problem" and gives me the ability to "Apply patch" or "jump the fix. When I choose "Apply patch" I finally get the message "device driver software not properly installed" - Please consult the manufacturer of your device to help... »

  Someone at - it ideas why all of a sudden I get a problem with my CD, I can not restore to any previous backups that I need a CD-Rom drive to do? In the meantime, I'll do a search in the site of compatibility of Windows to see if I can find a match for my camera and what he said about it.

  PS. the only thing different (new) I did just before I lost my CD-Rom has been thast I had linked to a conversion cassette tape via a USB device that my wife wanted some songs from an old tape of copy on CD. Tape copied OK and was transferred to the software iTunes on the PC, but when I said that I wanted to "Burn" the selection in College, I noticed that my CD-Rom (player 'E') show is no longer on my PC configuration, only on disks hard "C" and "D". If this has an impact on my problem, I don't know - it could just have been a co-fact?

  The following MS KB article may help:

  http://support.Microsoft.com/kb/982116

  Try the auto fix (Mats - Run.dvd.exe) and if that doesn't work try following the steps for Windows Vista, which should also work for Windows 7.

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Get the error message, this button cannot be used with Windows Anytime Upgrade

  I just perchased a Windows Anytime Upgrade - Windows 7 Home Premium to Ultimate but when I enter the key I was send it tell me that this key can not be used with Windows Anytime Upgrade

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• No sound in the pc. (realtech HD audio, this device cannot start code 10) audio driver package-kb835221.

  in Add / Remove Programs, I got 2 programs of driver high definition audio I removed one and still does not

  Delete the other, a re-boot and re-install.

  See you soon,.

  Jerry

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Software device driver has not been installed successfully. __This device cannot start (Code 10).

  I am running Windows 7 on a HP Pavilion a1600n and sometimes in the last month the CD/DVD drive stopped recognizing DVDs and CDs. It is opening and closing, and turn the disc when I put them in the drive, simply do not recognize anything beyond that.

  The State of the device reads that this device cannot start (code 10).

  From what I could find online code 10 was a general hardware error. I tried switching to another Cd/DVD drive and even changed the cable to the inside to see if it was the error, it was not. When I plugged the DVD/CD drive second he tried to locate the drivers online and and informed me it software device driver was not correctly installed. I tried to find some kind of solution online, nothing helps. If there are some ad where this has been previously resolved for someone else and you could point me in the right direction, or if you have a solution to this problem, please help.

  Hi Dnah,

  See the following about the Code 10 error article:

  http://support.Microsoft.com/kb/943104

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• This device cannot start. (Code 10) with a hard usb pen and readers for windows 7

  Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;

  Reset

  Re-creating image several times.

  uninstall all the usb drivers on Device Manager Associates,

  update drivers,

  using the microsoft error fix program (fails to answer to find bespoke online solutions).

  Any help would be useful.

  Kind regards.

  Hello Scott,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with USB devices in the computer.

  I would like to know some more information on this issue to help you better.

  (1) that Microsoft fix program error have tried?

  (2) remember to make changes to the computer, before this problem?

  In the meantime, you can try to follow the following suggestions to solve the problem.

  Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.

  Thank you

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

  I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

  Thanks Abhishek,

  already, this option was unckecked. But miraculously it works now (after spending hours trying...).

  Beste, Geert

• My sound card does not work after working yesterday. "This device cannot start. (Code 10) »

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  OZNalex wrote:

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  Hello

  First do a hard reset.

  Please go through this Hotfix from Microsoft for the error you are getting.

  Please uninstall & update audio driver & BIOS after checking, you have such version specified in the site pilot here on the website of the HP product . Reboot after that. Do the troubleshooting in the Microsoft Fix document.

  When you're done, shut down the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key ESC that you start the computer to launch the Start Menu, and then select F10 to open the BIOS menu.  Press F5 to load the default values (sometimes it's F9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press F10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Check if its working

  Thank you

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.