drive hard maximum m8000n

Similar Questions

• Equium L40 - 17 M: what size drive HARD maximum can I use?

  I was wondering if anyone knows the maximum size of the hard drive I can install it, and what should I look for when you buy one?

  Thank you very much

  Hello

  I think that the L40 supports disk HARD 2.5 SATA and he s not what size HARD drive is important.
  The laptop must manage each 2.5 SATA HDD.
  500 GB 2.5 HDD is currently the largest on the market, but in the next time you will find the 2.5 SATA HDD that supports 1 TB (1000 GB).

• Office size drive HARD primary Pavilion T245.it (DM042A).

  Hello

  I need to change the disk HARD primary (80 MB) from my desktop HP Pavilion T245.it (System DM042A number), works perfectly since 2003 - thank you HP! - and I would like to know what is the maximum MB drive HARD size my PC / BIOS can handle.

  Thanks in advance, Giorgio

  Hello

  At least, you can install a 250 GB HARD drive...

  Thank you

• Dell Inspiron N4030 and RAM HARD Maximum disk capacity

  Hello. I want to improve my Dell Inspiron N4030 (with processor Pentium, running Windows 7 Ultimate) with the maximum requirements permitted by the system, but I have heard different maximum specifications from different sources, and I can't find any official information from Dell to know with certainty what is compatible. The website that I buy (crucial.com) components guarantees that I can use a modules 1 TB of semiconductors by car and 2 x 4 GB of RAM without problem, but I also heard that 6 GB of RAM and 500 GB of HARD drive space is what the system will accept.

  These are the components that I want to use:

  (MX200 essential 500 GB SATA 2.5 inch internal Solid State Drive - CT500MX200SSD1)

  (Crucial 8GB Kit (2 x 4 GB) 1600-DDR3L SODIMM - CT2294998)

  Any help would be much appreciated, I looked everywhere for this information and got nowhere thanks. :)

  Hi JDWATTS,

  Please write to the Dell Community Forum.

  Here is the configuration supported on your system:

  Memory: Minimum - 1 GB / Maximum - 6 GB

  Connectors: Two SODIMM connectors

  : Capacity 1 GB / 2 GB and 4 GB

  Type: 1 333 MHz SoDIMM DDR3

  Hard disk: fixed SATA HDD internal 2.5 "

  Basic configuration: 160 GB at 5400 RPM

  Maximum capacity (tested): 500 GB (5400 RPM)

  2nd drive HARD internal fixed: not available

  SSD: Not available

  Hope the above information is helpful.

  Please private message us if you have other queries as well as the service tag and system your login email.

  (Note: Please do not mention the id of service tag or by e-mail on the public forum because it contains your personal information)

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Use iMac drive HARD internal for storage only.

  I initialize my iMac to an external SSD. It makes my computer run faster. How can I completely wipe the drive HARD internal of my iMac and use it as a storage only?

  This isn't a big problem, except one. Apple does not support this method as a permanent solution. However, you have an iMac of 2012. I have a Mac Mini from 2012. I used a 1 to LaCie Thunderbolt Rugged HD to do this thing very via the Thunderbolt port. It worked very well for a while. Personally, I started my primary internal HD for OS X and the LaCie Thunderbolt as external storage. For reasons of registration and so on. Recovery of the Internet, as well. I have not found any major difference in the "boot speed" between internal or external HD. I upgraded the RAM of 4 GB to 16 GB all. and BAM!

  My HD Thunderbolt is partitioned as a time Capsule (1st partition bootable) and Mac Storage (2nd partition). The choice is yours, of course.

  Bravo!

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Error: 4M0T/4/40000003: drive HARD-1287

  I have problems with my iMac 27 "2011 with El Capitan.

  I run the Apple Hardware Test and found this error: 4M0T/4/40000003: drive HARD-1287.

  What it means?

  Thank you, Lucas.

  This means that you have hardware problems that must be addressed. Probably your HD sensor, fan or has failed. Take the machine to your local Apple service provider authorized to repair, if you do everything in your area, please click on the link of the Service Provider Locator allowed Apple to begin to find a.

  Good luck.

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373

  Does anyone know the significance of the errors 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373 that occur when you run Apple Hardware Test (AHT)?

  I guess it has to do with the hard drive by noticing the "HARD drive" code. IMac 27 "mid 2011 EMC 2429 3.1 GHz Intel I5

  Thanks for the reply.

  These error messages indicate cooling fans have a problem.  It is a hardware problem which is best treated in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• New drive HARD and OS upgrade on Equium A210

  I want to install a new SATA hard drive more and also upgrade from Vista to Windows 7 is only a problem at all and that I can use a normal Windows 7 disc.

  Hello

  Generally avoid any problem with drive HARD and OS upgrade. If you want to have the exact answer please let us know what model of laptop you have.

• Toshiba T2000SXE - drive HARD work not correctly

  Hello

  Me, it's once again and needs help mine I only before the court it is however more also not drive HARD problems got can help me there is one
  Skype: benny24534
  MSN: benny_elfischnuffi@live
  East of Germany (Germany)

  has also no BACK or as

  Thanks to vorraus to aid

  Hello

  To be honest, I don't understand what you mean :) It would be better if you wrote in German he could understand.

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• Drive HARD Toshiba guaranteed external profile corruption

  Hello

  I have a Toshiba secured 200 GB device. I moved some data from my laptop with Windows Vista 32 bit Edition on this disc.
  Then I tried to work with this pluging of data from the device on my new laptop with Windows 7 64 bit Edition.
  There was an error and the certificates to mount the drive on the new system (this is what Windows)

  Now I have can´t access to my data or on Vista or Windows 7.

  The unit shows a log of errors with this report: "the secured unit may be abruptly removed or disconnected.
  Reboot the system and plug the device to solve this problem. »

  No matter how many times I reboot my computer and repeat the process, there is no way to access my data again.
  I can record a new finger but I Don t want to lose the chance to recover my data.

  Any idea, please?

  Thank you very much.

  In my opinion, you should contact Toshiba service provider and ask for help. They should provide support for the Toshiba device.
  Maybe they can you give some advice or even access your data for you.

  I have the old external 2.5 120 GB drive HARD Toshiba for 4 years now and I'm really lucky that I don't have this problem.

• How much is a new drive hard hp product number is NP211AA - ABA MODEL P6112P

  My Device Manager shows my hard drive as a

  Drive SATA TOSHIBA MK6476GSX im do not know the size but in my drive C is about 575 f tools GB and my D is 20.1 and hp 99 mb. im not sure if im suppose to add anyone to the top or through the drive c only.  Im trying to contact hp to see if they could replace my drive hard when it goes too hard to use but id like a starting on that price, so I know not if its more wise to do things fixed or shopping for a new laptop.

  I have a

  Pavilion laptop 2123us g6

  Product B5A04UA number

  Windows 7 64-bit sp1

  If you have activated the link to parts store, I've included it should show hard drives available for your model and prices for your area. If you prefer to fix it as a repair, then telephone HP support, please use the following http://www.hp.com/contacthp and create a folder for your question. Once your case is created, you should get the number to use to contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Either by the way, if you have only one hard drive installed which is the normal case, the size of your hard drive will be the sum of all partition sizes as well as all space not yet allocated.

  I hope this helps.