Drive of digital printing does not

Similar Questions

• Printer does not not after replacing the hard drive

  Original title:

  just had new hard drive, now printer has stopped working

  printer worked perfectly, was to have the new hard drive, now the printer does not

  Hello

  1. What is the file extension of the document that you are trying to print?
  2. Have you tried the suggestion from my previous post?
  3. The problem occurs so that printing from a specific application, or it happens with all?
  4. You are able to print the test page?
   
  You can try the steps in the link below and check:
  Error message when you try to print an .xps document in Windows Vista or in Windows XP: "an error has occurred in the application you were using.
  http://support.Microsoft.com/kb/945538
  Note:
  Although article applies to Windows XP and Windows Vista, you can try the steps and check if it helps.

• Printer does not print need to update driver of Magenta - Lexmark

  Original title: printer does not print Magenta

  I have an old Lexmark printer. I just installed new toner and it won't print magenta. I downloaded a new driver from the Lexmark Web site supposedly and yet, it will not be printed. I can't find the old driver anywhere, through each directory on the computer. Windows Help doesn't help. Told you to follow the instructions of the manufacturer. Manufacturer tells you first uninstall the old driver. Windows Help doesn't tell you how to uninstall the drivers.

  When I contacted Windows /Dell they pass the buck to Lexmark. Lexmark passes the ball to Windows/Dell.

  Would appreciate help. Found this material to support online and they scanned and said I have eight corrupt & or old drivers, but it is $29,95 to help.

  Thx for any help

  Hello

  driving finder programs can tell you almost anything to earn money from your

  drivers for your computer:

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  and for drivers Lexmark contact you Lexmark

  Lexmark wrote the drivers for their products, NOT microsoft

• My canon s200spx printer does not work on windows 7. I can't find a drive

  My canon s200spx printer does not work on windows 7. I can't find a drive

  Hello

  1. do you have a code error message when you try to print?

  2. don't you make changes to the computer before the show?

  3. you are unable to find the drivers for the printer?

  I suggest for the link and follow the steps in the article:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also download and install the latest drivers from the manufacturer's website:

  Reference:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/s_series/S200#DriversAndSoftware

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• my printer does not, print says no driver found and implemented to update spooler.

  Original title: all of a sudden my printer does not print says no driver found, went to the website of downloaded lexmark driver but still does not print. conjecture.

  I try to print, but it seems that the computer and the printer are not on the same page.
  This just started about 4 days ago.
  Spooler has something to do with it, I got a pop for updating the spooler or not and not clicked by chance do not know how to find it so I can update.
  Not really in all the tech stuff, any help would be grateful.

  Hello

  Do you remember the full error message with spooler?

   

  Method 1: Run the following fix - it:

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2: See the following article:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 3: As it happened four days before, restoring the computer to a date where it worked fine before.

   

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• I'm on a mac and my printer does not print

  I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all-in-one), but the printer does not print. My printer worked fine and now it will not print. I'm doing something wrong. This has happened once before and I am frustrated with and left for about 2 days, I had tried everything I could think of, unplug the unit for an hour or more, uninstalling and reinstalling, checked ink levels they were very good. Then all of a sudden, he started working again. I turned on my computer and the printer, and surprisingly it comes to start printing. Does anyone else have this problem? If so what do you have? Or someone has any suggestions of what I can hurt!

  Thank you

  Make sure that your OS X is healthy:
  
  1. download and install OS X Combo Update.
  2. download and install the printer driversHP from Apple.
  
  Finally, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page (if you want).

  Do not connect your printer via a USB hub, connect directly to your Mac.

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• HP OFFICEJECT 4655: THE PRINTER DOES NOT PRINT

  MY PRINTER DOES NOT PRINT DOCUMENTS FROM MY COMPUTER OR MOBILE DEVICE. I PUT IT UP WIRELESS BUT WHEN I OPEN CONTROL PANEL PRINTING OPTIONS AND DEVICE ON COMPUTER IT SHOWS UP BY DEFAULT AS HAVE A SMALL LOCK ON THE PRINTING SHORTCUTS SYMBOL. HOPE I'M MAKING SENSE. Help, please

  Hey @TEJANA1956,

  Thanks for the information!
  
  • Wireless your Officejet currently solid, flashing, or turn OFF light?

  In the meantime, we will try to run the HP print and the tool of analysis of the doctor. Please click here to download the tool. Once the download is complete, run the print and Scan doctor to 'difficulty Printing.' Should any conflict of connection, software or driver find that printing HP and the doctor analysis tool will attempt to resolve these conflicts. Once the tool is complete test print.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped.

  I would like to know how it goes!

• Printer does not print despite the installation apparently OK

  I have a HP Deskjet F380 all-in-One.  I know it's old, but that's all I can afford.  I am running Vista Home Basic.  Again, I know it is old but... Long ago he began to resettle whenever I used it.  This problem has been fixed and he started that recently still do.  Until copy 11.

  I tried to reinstall the driver and that seemed fine, but now the printer does not work.  He made all the right th 'noises', but nothing happens.

  I'm REALLY desperate.  Even though I know that printers are also good markets that... these days, my budget running on fumes abd replacement is not a viable option at this time.

  REALLY hope someone can help.  Thank you very much.

  Hello

  Try to install the following hotfix, restart your PC and check differences:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-69585-1&cc=us&DLC=en&LC=en&OS=2093&product=1128296&sw_lang=

  If that doesn't help try to install this patch as well:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-69124-1&cc=us&DLC=en&LC=en&OS=2093&product=1128296&sw_lang=

  However, ensure that the harware is unctioning by creating a copy of the device itself, if it works and all the fixes above does not help, try replacing the cable USB... so make sure that it is not longer than 2 meters long and directly connected to your PC (and not by extensions or hub USB.)

  Kind regards

  Shlomi

• DeskJet d2430: printer does not appear in the hp Solution Center

  I installed the HP Solution Center. My scanner appears but the printer does not work so I can't align the cartridges or print test pages.

  How can I get the printer on the solution Center

  Welcome to the HP Forums @eclife

  I saw your post on how you manage not to run a test print from the solution Center pages or alignment, and I wanted to stop sharing my own suggestions.

  Try to download and install the full feature software and driver, and then try again: series of printers HP Deskjet D1400, D2400/D4200 Full Feature Software and Driver

  A few links to help:

  Align the ink cartridges

  User manual

  If you have any other questions, let me know.

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• Printer does not work. Some impressions on white paper.

  Original title: printer

  My printer does not print. It prints just a blank sheet of paper and not what I need to print?

  Ryan

  Have you contacted the printer manufacturer?  Have you reinstalled the driver?

• "I get a message when troubleshooting my message" printer does not "on my screen, it says"contact the network administrator. What does that mean?

  I think that the port of my computer does not accept my printer

  Hello

  (1) what is the brand and the model number of your printer? In addition, how the printer is connected to your computer?

  (2) is on a network or locally connected?

  (3) what operating system is installed on the computer?

  (4) when this printer worked very well for the last time?

  (5) where to get you the message printer does not, it is while printing a document or by pressing any button on the printer?

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.
  Note: The following troubleshooting applies for the Windows 7 operating system.

  Method 1: Run the printer Troubleshooter
  Name, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. below "Printing on the following ports" section, select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  I hope this helps.

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.