Can not go on the internet when everything seems to be OK.

Similar Questions

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• can not go on the internet when installing udates

  When the newist updates are installed it loads web pages up. I do a system restore before the udates were installed I did it twice in the second first time I did a system restore I could get on the internet until the updates have been installed when the computer turns off. Then, when started upward could not go on the internet.

  jaco9876,
  Before installing the updates get the latest network adapter driver.  Update the driver and then run the Windows Update and see if that corrects the problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• 9.3 IOS cannot be verified.  Says the Iphone 5 is not connected to the internet when it is.

  My Iphone 5 will check the IOS 9.3 update.  The message says that the phone is not connected to the internet when I know that it is.  What is the problem?

  There are widespread reports that older devices have problems with activation after the update. Your question is before the update.

  This seems to be a different problem, but I suspect it's really Apple prevents you from installing the update, you already downloaded, until they solve the problem of activation with the update.

  For those who connect via iTunes, you would see that you are already using the latest version, because this is now the latest version that you can download. Your phone has already downloaded, if Apple blocks you install.

  Wait for the update of the update. I bet that you should remove the 9.3-same already downloaded install file to your storage management settings.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• "Not connected to the internet" when trying to access the help files

  original title: when I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says I am not connected to the internet when I am.

  When I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says: I am not connected

  to the internet when I am.  Does anyone have a solution to this problem so I can use the help topics?

  Hi advbill,

  You try to access the items online or offline help?

  a. press F1 on the keyboard.

  b. click Options, and then click settings.

  c. check to improve my search online help

  d. click on apply and OK.

• Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• 9.3 OS does not complete on my iPad 2 get message that device is not connected to the Internet, when it exists, a solution?

  WWhen updated my iPad 2 with OS 9.3, when I finally install, during the verification step, message, is that the device is not connected to the Internet when connected. Anyone else have the problem? All solutions?

  Sesame problem on my iPad mini I want to finish the update already

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Windows 7 - says that I am not connected to the internet when I am.

  Original title: why

  Why my computer says that I am not connected to the internet when I am and no web pages don't show because they say that I'm not connected

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• How can I disable the CS3 when I get an error message that I am not connected to the internet when I am?

  Try to deactivate CS3 from a computer to reload on another. Get the error message that I am not connected to the internet.

  It is NOT correct. Customer support can handle deactivations of CS3. Use Web Chat here:

  Serial number and activation support

• Can not go to the Internet by Local and Wireless LAN network

  I have a HP Pavilion dv6711TX laptop with Vista Home first. Everything works smooth and excellent for the year passes, however it could suddenly not going to the internet 3 days ago. In Device Manager, every material looks ok without problem and conflict. I tried to reset the router, laptop computer (disconnect the power supply and battery) reboot and tried to let Windows automatically diagnose and repair the problem, but so it does not solve the problem. He could find my wireless router and connected, but shows "undefined network." Is it a hardware problem or a software problem?  Help, please!

  Hi Peter,.

  Please use the forum for Support of Vista,

  Go to the HP website and download the updated driver for your wireless card.  Install the driver to see if it will help you solve the problem.  If it doesn't, use an ethernet cable and connect directly to the modem to see if your connection is always good.
  You can also search for known issues with your hardware from HP site.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I receive an error message that I am not connected to the Internet when I try to update to 9.3

  I tried to update to IOS 9.2.1 9.3, but after the update is verified, he said I am not connected to the Internet, but I can get on safari without problem. I have tried rebooting and turning my victory-fi off and turn it back on. I even tried plugging my iPhone hotspot. It happens if my iPad is connected to the power supply or not. Then it gives me the choice to start over, or remind me later. I've never had a problem before update. any ideas?

  Because Apple pulled the iOS versions 9.3 to less recent devices. Wait for a patch.

  (140935)