Drive vs hard internal external hard drive

Similar Questions

• N200 registration / activation / deactivation of the internal & external microphone

  Hi 3000 N200 support

  I accidentally turned off/disabled the device Microphone internal / external.

  Unfortunately, now I'm not able to activate / reactivate the microphone device.

  Please, help me to reactivate the device internal microphone / external.

  When I open the control panel-> Sound-> record (tab), everything is "grayed out".

  and it says no audio device is installed.

  I guess it's Realtek High Definition Audio device driver 6.0.1.5391 version.

  Thanks in advance

  Carsten

  Under Windows Vista

  If you have accidentally disabled the device interanal external microphone, you should try to go to Contral Panel > hardware and audio > Sound > recording.

  Right-click on an empty area, and then check the "show disabled devices". Activate the internal microphone / external device you want.

• internal/external speakers, all the controls reveal all workers

  internal, external, mike, headphones do not work.  After all recommended controls, unistall causing w/restart install: same problem.  also used fix - it several times: same problem.

  Help!
  Joe

  Make sure that you have downloaded the correct driver on the support site for your computer manufacturer.

  Try this:

  Go to control panel, sounds.  On the properties of sounds, click on the playback tab select your speakers, then click on the button "set as default". If you don't see the speakers, right click on the box and click on "Show disabled devices" and "Show disconnected devices".

  Do the same for your microphone on the "recording" tab

• Access my files after converting HD internal external hard drive?

  I was using a Lenovo Thinkpad notebook that had initially installed, Windows 7 upgraded to Windows 8 and Windows 8.1 then. Screen of the laptop was accidentally crushed, and while the laptop was working fine, it was unusable because the screen was totally destroyed. As I'm travelling and I wanted to replace it anyway, I took the hard drive and put it in an external enclosure.

  I try to access my files from the hard drive on another computer. This computer is running Windows 7. When I plugged in the drive for the first time, I authorized the computer analyze and correct (I think, I don't remember the exact words) the hard drive. Now, I'm trying to get my files. I believe that they are under "Users--> last" but then an error message will appear, telling me "you don't currently have permission to this folder. Click on continue to get a permanent access to the folder. "I click on continue, then get"you have been denied access to this folder. To win access to go to Security tabs. "But I do not know what parameters to change in the Security tabs, as I can in all. More on the Security tabs, it shows me that the folder is empty.

  I can't unlock this file? If so, how? I screw it up by leaving this analysis of the computer the drive? Is there a chance that it works on a Windows 8?

  Any help is VERY appreciated!

  ---

  EDIT: This is a public library computer so I can't access the administrator user. When I get to 'Properties' for the record, there no tab 'security', just general, "sharing, previous versions, customize. So maybe I should try it on a computer where I can access the administrator user?

  LR

  You must take possession of the HD.  Instructions for which are here

  http://www.SevenForums.com/tutorials/1911-take-ownership-shortcut.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

  It should not interfere with the computer of libraries, but not sure how they would feel on this subject. (it can always be reversed when finished)

• First white screen of death, now black screen on the internal, external screen works

  Hello

  a few months before I could not suddenly start my macbook more. He had the white screen of death and absolute no functionality in addition to its departure.

  A few days ago I got the macbook, open/close a couple of times so that it is operated and suddenly the keyboard LED lit and the screen

  turned black. I realized that he really started and connected to the external monitor. everything works fine now in addition to the internal display.

  I run Apple Hardware Test mode clamshell, but extensive testing even said that there is no material errors.

  can I conclude that my screen is not faulty? I thought it of the graphics chip, but wouldn't the AHT it detects then?

  Another thing to mention is that the battery should be changed (warning hint)

  I tried PRAM - & resetting the SMC without success.

  MacBookPro 13 "A1278 mid-2012.

  I would really appreciate any kind of advice.

  Thanks in advance

  Alex

  The symptoms you describe point to a faulty screen or display connection.  Make an appointment at an Apple store genius bar for a final assessment.  The event will be FREE.

  Ciao.

• Qosmio X 870-116: use of Intel / nVidia GPU internal / external display

  Hello

  I have a Qosmio X 870-116 which have 2 video cards, an Intel onboard and a more powerful Nvidia.
  My problem, I did not how to pass my screen on the Intel card and I see my Nvidia for the display external.

  Someone has an idea to pass on to my first display nvidia card?

  Thank you

  Hello

  Something like this isn't possible.
  You cannot use two cards simultaneously for internal and external display.

  First of all, you can switch between the external and internal view using the Fn + F4 (or just F4) function key

  Secondly the nVidia Optimus technology optimize the performance of the laptop perfectly without a GPU nVidia and Intel graphics card.
  Switching is automatic and requires no reboot of s for laptop.

• V/s internal external memory

  As the v/s R42 R40, I saw sometimes camcorders come in a 8 GB and a 32 GB of the same version model and the price difference is a good $100 - $ 150. You could buy a 32 GB SD card for a lot less than that. So is there a disadvantage such as speed or response when using external memory to memory internal? Why one who would spend much more and buy a 32 GB version? I can see the convenience of not having to empty the internal memory so often, but then again there is a risk of failure too I guess? If the camera dies then make your priceless videos?

  PFM,

  SD memory cards come in capacities and variable speeds.  You choose which card you want to use, but the speed rating or a class rating will count a bit.  It is possible to use cards that are slow, as class 2 or 4.  However, when you use a slower card, the camcorder may not be able to record videos on demand.  If you want to save to the SD card, I highly recommend that you use a card rated superior, at least in class 6 or 10.

  It has not responded to your question or problem? Find more help contact us.

• Memory internal & external synchronization problems

  I'm a few problems of synchronization of internal and external memory - it will sync perfectly with the internal memory, but then used to synchronize the rest of the songs to my micro SD card, I have had worked in the past, but do not remember what I actually did, when I have external sync that he's trying to just put all the songs once again. Pointers?

  Kane wrote:

  I'm a few problems of synchronization of internal and external memory - it will sync perfectly with the internal memory, but then used to synchronize the rest of the songs to my micro SD card, I have had worked in the past, but do not remember what I actually did, when I have external sync that he's trying to just put all the songs once again. Pointers?

  Do not use automatic synchronization. Choose for yourself what songs to put and where to put them.

• CANNOT SET HEADSET AS DEFAULT PLAYBACK DEVICE / INTERNAL & EXTERNAL SPEAKERS USED AT THE SAME TIME

  When I connect to my laptop with external speakers or headphones then the laptop speakers (internal) is also play a sound.
  Please help me.
  I have re-installed the software drivers, BIOS, but has not solved the problem.
  
  
  Thank you & best regards

  Hi Das_Burdwan Ridge,

  You can check this link to get the drivers updated to your computer: http://www.dell.com/support/troubleshooting/us/en/19/Product/inspiron-15-m5010

  Alternatively, you can also post this question in the Dell Community: http://en.community.dell.com/?~ck_=_mn

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• View internal, external direct connection in the tunnel?

  Today we use XP virtual machines with view 4.0.1 only internal direct connect (need this to our Sun's rays). But now, we want to use our XP virtual machines to internal direct connect and externally by tunnel via the SSL protocol. What do we have to do for that?

  My idea is to install a server security in the demilitarized zone and a new second login view without direct connect server, is the right way?

  If so, we can allow the same VM XP for internal and external direct connection in tunnel?

  That's how we have our configuration of the environment.  You can configure the type of connection to the server by going to the page view Admin, configuration, servers.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Connect to virtual machines across multiple servers of connection for internal/external access

  Hello everyone

  My apologies if this is a silly question, but is it possible to have an individual virtual machine or pool accessible through multiple connection servers? Here is my setup and my scenario:

  Connection to server 1 - direct connect active, PCoIP, serving internal users.

  Connection to Server 2 - live disabled connect, RDP, coupled with a security server, serving external users.

  We seek to deploy Wyse PocketCloud on Wireless / 3G iPad so support for users outside the campus of the hospital can access their desktop.  Users will be expected to have office in the same condition as when they were on campus.  Our doctors are attracted to the iPad, then this will be a test for future deployment phase.

  VMS users are controlled by cs 1.  I would like that the possibility for users to directly connect to their virtual machines using PCoIP when they are internal and RDP via security server when they are external.  Is it possible without using a VPN or live with disabilities on cs connect 1?  I tried to add a virtual machine that has already been setup on cs 1 CS 2 but once cs 2 picks up I can connect is no longer the virtual machine through cs 1. Servers will also relay the reconfigure virtual computer every minute, so this is not the right way to do this.  Someone had customers or users who wanted to make something similar to this?  If so, how did you manage?

  Thanks in advance for your comments

  View what version are you running?  In later versions, you can set directly relate to the level of the server.  So now you can simply deploy a replica of your main connection server that runs Live mode while having your other login server in indirect.   This way you can have a view environment and run your desired configuration.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Use BeehiveOnline to create the internal/external email address

  I need to have an e-mail alias which will reach internal and external members. I used to be able to use the APS to create an e-mail alias and add two internal members and external to Oracle. Now I thought I should use BeehiveOnline.
  
  I created a group that includes an external member. How can I view the email address for the Group (if it was created automatically when I created the Group) or create an e-mail alias which sends e-mail to each Member of the Group?

  Hello

  If you have created a group on BeehiveOnline it is, by default, a distribution list with everyone in it - internal and external.

  The recommendation is to create a group, but unless you need the workspace to select No for the "required default Workspace:" option.

  Once the group is created there will be an equivalent of [email protected] e-mail address so if your group was called "Acme" your email address to send to the members of the Group would be "[email protected]".

  Phil

• Internal-external-left bleeding. Why does not have this option?

  I have a book to export to PDF.  I need funds lost to have the value internally and externally, not left and right.  Is there a way to specify to InDesign to make that happen?  Sometimes I get this option, sometimes I did not and I do not understand why this is inconsistent.

  The book documents are set up as double pages. I have none of the documents selected when exporting PDF X 1.

  There seems to be zero documentation out there on this.

  I know I could set the purge as a document and set the purge for each of them. But since there are about 50 sections and it's going to two different printers with two different purge plug is a great deal I want to deal with.  In addition, why?  As I mentioned, in most cases, even with the exact same book I care now, internal and external purge option is (or was) available.  But this time I can not get again. Am I missing something obvious?  It seems I've tried everything.  So if any of you have an idea I'm all ears.

  Depends on if the document has been implemented across the pages.

  With facing pages, you get the bleeding and the inside and outside margins. With non-connected you get right/left.

• Satellite A500 - 14 k black screen internal - external monitor is ok

  Hello

  I have some problems with my computer screen laptop toshiba satellite A500 - 14 k (p / n: PSAM3E - 02Q008FR)

  Initially, the display on the screen was blurry and not stable. I had to tilt the screen to get a picture.
  But recently, I have no display at all on the laptop screen.

  However, the display is on an external source using the VGA or HDMI output. I think that the problem is not in the motherboard or graphics card, but maybe in the screen, the lcd inverter or the video cable LVDS.

  Is my correct deduction or not?

  First I'll change the cable of the LCD, but I do find the model for my laptop (dc02000ud00 p/n K000080540) at a reasonable price.

  I checked on ebay and I want to know if the cable of the LCD for toshiba satellite A505 might fit my laptop as this product

  http://CGI.eBay.fr/Toshiba-A500-A505-video-cable-6017B0201901-V000190070-/120554876390

  It is said that the cable is for satellite A500 A505 their American model. Do you think this could be compatible with my french model?

  Another issue is on the cover of RAM. I lost mine and I would like to know the reference of a new (product number)?

  The shape is like on the Toshiba PC Satellite maintenance manual I found on this site (see page 25 of the manual)

  http://Tim.ID.au/laptops/Toshiba/Satellite%20a500%20PRO%20a500.PDF

  Thank you for your answers

  > However, the view is of course an external source using the VGA or HDMI output. I think that the problem is not in the motherboard or graphics card, but maybe in the screen, the lcd inverter or the video cable, LVDS
  > Is my correct deduction or not?

  I agree with you it s not related to the graphics chip on the motherboard.
  There must be something wrong with the LCD display or a tiny part as FL inverter or similar

  In your case, I recommend you ask the authorized Toshiba partner in your country for compatible parts.
  In this case, you are always on the right side and can be 100% sure that ordered parts would be fully compatible.

• Unrecognized command-line control internal/external errors

  First of all, for anyone who believes, it's a problem of environment path. All orders are in the path.

  The problem is that the command line requires the full extension to type to work rather than simply the name of the executable.

  Here is an example:

  Type: ipconfig

  Result: 'is not recognized as a builtin or external, operable programor batch file'

  However,.

  Type: ipconfig.exe

  Result: (all my ip info...)

  For some reason, my computer has gone into requires me to type the full extension. While it is a commonplace Act, I need only continue now because several batch files, I am running the facilities have not always the full .exe and fail to find the 'command '.

  
  What I stupidly changed the absence?

   

  This article explains http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile#1TC=windows-7 how the data can be moved on the plu account.

  Thank you!