Driver for canoscan 1240u

Similar Questions

• Driver for CanoScan FB630U Windows 7

  I n I find the driver for CanoScan FB630U Windows 7... That help?

  See http://software.canon-europe.com/products/0000461.asp.

  The latest driver for the FB630U is for XP. There is no drivers Vista or Windows 7.

  You need a new scanner.

• compatible driver for CanoScan N650U/N656U

  Can I download the compatible drivers for CanoScan N650U/N656U. I have the Vista operating system.

  Hello

  Canon N650U/N656U Scan is not compatible with windows 7 follow the link below to check the compatibility of the Canon N650U/N656U analysis:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=CanoScan%20N650U&type=hardware

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=CanoScan%20N656u&type=hardware

  I suggest you to install the Canon Scan N650U/N656U driver in compatibility mode. Follow the steps below to install the driver for the Canon N650U/N656U analysis:

  Step 1:

  Download driver Canon N650U/N656U Scan from the links and choose Windows XP to download:

  http://USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n650u#DriversAndSoftware

  http://USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n656u#DriversAndSoftware

  Step 2:

  After above step install Scan Canon N650U/N656Udriver in Windows vista compatibility mode, follow these steps:

  a. right click on the Canon Scan N650U driver fileand then click Properties.

  (b) in the Package name properties dialog box, click the compatibility tab.

  c. Click to select the run this program in compatibility mode for check box, click on Windows XP (Service Pack 2) in run this program in compatibility mode for list, and then click OK.

  d. double-click the executable file to start the Setup program.

  For more information, take a look at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Need a driver for CanoScan 9950F

  I have A CanoScan 9950F which is not compatible with my Windows 7 Premium Edition. The driver for a 32-bit system, new 64-bit system. No driver problem on the Canon site for this problem. Bright ideas out there?

  Get a device support.  If the manufacturer doesn't have 64-bit drivers, then no one else will, and if they offer compatible driver and no advice on what will work the other/other drivers, here again, no one else will have.

• where can I find a driver for canoscan lide 30 that is compatible with windows 7?

  Windows 7 64 bit

  There is no driver for win7 64-bit, it's not compatible

• Need driver for Canoscan LIDE 60 WIA / Windows 7-64 bit

  Cannot find this driver anywhere. Are there?

  Scanner CanoScan Lide60

  You must ScanGear CS 11.110 has from your regional Canon website. Look under Support for the drivers.

• I have problems to load Windows 7 driver for Canoscan 4200f Canon's site

  I downloaded the driver from Canon site which has been saved in a folder 4200fvst8611a_xpen. In this folder, it created a file called Set Up SG that is a .exe file.  When I open this file, it passes by Winzip Self-Extractor as Canon ScanGear CS 8.6.1a_xp Set Up and then nothing happens.  Cannon suggested that the I need to find where the computer stores the extracted file, and then run it form there.  I did a search of system using "Canon ScanGear" but it is empty.  WinZip Self-Extractor stores files in a fixed location?  Any other ideas of what I could do wrong?

  You are looking for something that does not exist.

  Run the 4200fvst8611a_xpen.exe of origin file installs the scanner, including scangear driver. ScanGear is not a stand-alone program, it is only open during the process of acquiring some program graphics you scan in. Assuming that you have installed the Canoscan Toolbox, you can also open Scangear from there by checking the box labeled "Use the driver scanner to make advanced adjustments". Otherwise, you never see the scangear interface and it was just a quick scan using the settings for any Toolbox button you have chosen. Scangear advanced mode, you can change various preferences including whether it closes automatically after each scan.

• is there a driver for canoscan lide 60 that runs on windows 8

  installed the installer disc win8 not reconise driver was on xp

  Not on the original CD and not on the Canon website.

  There is a Twain for Windows 7 driver that can work with Vuescan to give you a comprehensive operational, but Vuescan costs $$.

  You could however try and decide if you want to go this way or buy a new scanner...

  You need downloads...

  TWAIN driver... http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide_60#DriversAndSoftware

  VueScan...

  http://Hamrick.com/  You can run the trial version to see if it works

• Can not find the driver for Canoscan Lide 60

  Have you tried re-loading Windows 7 x 64 driver, who has worked previously. Driver Windows 8 is not available for my Canon Scanner.

  Hi Russ van Greuning

  Thanks for posting in the Microsoft Community.

  If you are unable to find the drivers for Windows 8 you can download drivers designed for Windows 7 and install it in compatibility mode.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide_60#DriversAndSoftware

  http://Windows.Microsoft.com/en-us/Windows-8/get-apps-devices-working

  Follow the steps to run in compatibility mode:

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for Troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click run programs made for previous versions of Windows

  (e) click on Next, select not listed. Click Next

  (f) click Browse and select the driver file you downloaded.

  (g) click on Next, click program troubleshooting

  (h) check the program worked in earlier versions of Windows but won't install or run now

  (i) click next , select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next

  Let us know the status.

• How can I download canoscan lide 25 driver for windows 8?

  I have a scanner gun (Cano scan lide 25) and I was unable to download a driver for it that is compatible with windows 8.

  Please someone tell me if it is possible to operate this scanner with windows 8

  Hi El-Sayed,

  I suggest you download the drivers from the link below. There is no driver for Windows 8, so download driver for Windows 7 and install in compatibility mode, and check if it works.

   

  Software drivers &

   

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide25#DriversAndSoftware

  You can follow the steps to download the driver in mode of compatibility from the link below.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Write to us at the State of the question. We will be happy to help you come.

• Canon LiDE 700F scanner driver for OS10.11

  Since the El Capitan upgrade my Canon LiDE700f scanner is not recognized.

  I can't find a new driver for OS10.11 on Canon website.

  Any advice?

  Hi Alan_20,

  I understand that you are looking to get your Canon scanner to work with your Mac after upgrade to El Capitan. According to our records, there is software available for this device. It may help to check the software updates (via the Apple menu) before you connect your scanner.

  Look for software updates before connecting your printer or a scanner. This updates the list of the most recent supported on your Mac printer and scanner models. If you do not check the updates before trying to connect a new printer, you won't see the software available when you connect your device.

  Canon CanoScan LiDE 700F *.

  4.1.0a

  S

  Printer and scanner software available for download for your Mac
  https://support.Apple.com/en-us/HT201465

  If you are still unable to get your Mac to recognize your scanner, the next step would be to reset the printing of your Mac system.

  Mac OS X: how to reset the printing system
  https://support.Apple.com/en-us/HT201539

  See you soon!

• Windows 7 Driver for Scanner Canon

  I just got Windows 7 64 bit for my dad and installed and works fine, the only thinkg this thing that causes us problems is that it has a scanner more old "canoscan lide30' and it worked very well with Windows XP but now Windows 7 seems not to have a driver for the scanner, I was wondering just if first is there a driver for him and if so, where can I get. second if not a pilot so is there a driver that I can use to operate for now? Please let me know

  Compatability MS says it's not compatible
  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20CanoScan%20LiDE%2030%2048Bit%20USB%20PC%2FMAC%20Scanner&v=Canon&uid=7890A002&pf=0&pi=5&c=Printers%20%26%20Scanners&sc=Scanners&os=32-bit

  CanoScan LiDE 30 support with windows vista drivers
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=6623

  Select the operating system from the drop-down list, you should essentially be able to use the Vista drivers but
  If you wish, you can use the Compatibility Mode to install if it fails to install correctly

  Right-click on the Setup file
  choose Properties
  Select the Compatibility tab
  Select the Vista 64-bit
  Press ok
  Run the install file

  Help others, tell us which solves your problem. Click useful Vote for those who help.

• Where can I find a twain driver for the scanner?

  Original title: twain driver for Windows 8

  After having upgraded Win 8, my scanner has failed. Once verified, the problem come from twain driver. Pls help

  Fixed mine. There is no drivers Windows 8 available on the Canon's Internet site or Windows Update. Follow these steps to install a scanner CanoScan 8400F under Windows 8 x 64 in desktop mode:

  (1) download and install the drivers Windows 7 x 64 on the Canon site.

  (2) launch Manager devices, right click and uninstall any unknown device (?), then scan again for new hardware and drivers Windows 7 x 64 installs automatically.

  (3) download and install the Canoscan Toolbox software from the Canon site.

  (4) run the Canoscan Toolbox software, select settings and click on the reset button to fix the non-working electronic copy, scan, PDF, mail scanner buttons.

  (5) reset.

  The button is restored after the restart. Everything works as expected today. Good luck!

• Windows 8 does not have a driver for a Canon 9950F scanner

  My Canon 9950 Scanner (Canoscan toolbox) worked on my XP and Vista OS, but there is no driver for my new system of Windows 8. Can anyone help?

  I hope this helps someone. I have a Dell XPS 8700 with 8.1 Win 64 bit on an SSD. As everyone knows the drivers Canon 9950f only go up to Win 7 64 bit. So I installed the twain driver for win 7 64 bit and the Canoscan for win 7 64 bit. I installed using the compatibility option. I rebooted and plugged my USB and it works! I love my 9950f and stressed it would not work on my new computer.

• Win 7 has no driver for internet

  I don't have a driver for win 7.   My os is 10.11.6 I downloaded current drivers for win 7 on my FlashDrive twice how to do the driver I need for the internet?

  There is no driver for the internet, it is, however, drivers for the wired ethernet card and the card wifi

  Download the bootcamp driver zip https://support.apple.com/kb/DL1721?locale=en_US

  Navigate to the manufacture of chip ethernet driver file and the wifi and install their exe files in windows