Driver for HP m6-k010dx for ACPI\HPQ6007 on Windows 7

Similar Questions

• Driver for ACPI\HPQ6007\3 & 21436425 & 0

  Hi, I wonder what driver I'm missing for my "unknown device" with the device instance path:
  ACPI\HPQ6007\3 & 21436425 & 0?

  Kind regards
  Johan

  Hello

  install this

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117749-1&cc=us&DLC=en&LC=en&OS=4132&product=5395193&sw_lang

  that should help

• Driver for HP Envy 15-j150sr for unknown device ACPI\HPQ6007 on Windows 8.1 (x 64)

  Hello

  I'm looking for a driver for the unknown device ACPI\HPQ6007 on HP ENVY 15 - j150sr for Windows 8.1 64-bit if I need. I upgraded my laptop - replacement SSD HARD drive. I have found information, ACPI\HPQ6007 is associated with HP 3D DriveGuard, which protects the hard drive by parking the heads. But I SSDS, no HARD drive - what's that on your head?)) I tried to install HP 3D DriveGuard for my laptop model and operating system. It did not help, the unknown device remained ACPI\HPQ6007. I don't know what to do about this.

  Hello

  Please try:

  HP 3D DriveGuard Software
     http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61291.exe

  Kind regards.

• Satellite T110-107 - need driver for ACPI\QCI0701

  Hello

  I just reinstalled a fresh copy of windows and I can't find the driver for ACPI\QCI0701
  Tell me which driver should I use

  Fine thank you

  And can you tell us what windows you have installed?

  Also check http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=190545

• Driver for ACPI\HPQ0004\3 & 33fd14ca & 0

  HP ProBook 4510 s

  Windows 8

  Need driver driver for ACPI\HPQ0004\3 & 33fd14ca & 0

  Hello:

  This one should work.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5060882 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_109933_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Need driver for ACPI\HPQ0004\3 & 33FD14CA & 0 for HP Pavillion DV4-1210EO and Windows 7 ultimate x 64

  Hello. I'm looking for driver for ACPI\HPQ0004\3 & 33FD14CA & 0

  I replaced the HDD with a SSD from X 25 - m Intel and replaced Windows Vista with Windows 7 Ultimate X 64.

  It is the only unknown device I have. I've searched the forums and found solutions for Windows Vista, but not for Windows 7.

  Anyone?

  FranKeRS76

  Hello:

  If this isn't your quick launch buttons driver, then it is probably the ProtectSmart HDD driver that is missing.

  Quick Launch buttons driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-78740-1&LC=en&DLC=en&CC=US&OS=2100&Tool=&Query=dv4-1210EO%20&Product=3889064&sw_lang=

  ProtectSmart Driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-82853-1&prodTypeId=321957&prodSeriesId=1847703

  Paul

• Driver for G7 - 2251DX running windows 7 64 bit

  I need the driver for the laptop next

  HP Pavilion G7-2251DX

  Install windows 7 64 bit and can not find the driver for the following.

  PCI\VEN_1022 & DEV_780B & SUBSYS_184B103C & REV_14
  PCI\VEN_1022 & DEV_780B & SUBSYS_184B103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  Any help will be appreciated.

  Thank you

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-G7-2251DX-running-Windows-7-64-bit/m-p/3819706

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• I'm looking for the driver for canon cp400 pour windows 7

  I'm looking for the driver for canon cp400 pour windows 7

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have windows 8 and ip4000. The software does not load and it doesn't seem to be a driver for 8 64-bit windows. What can I do?

  I have windows 8 and ip4000.  The software does not load and it doesn't seem to be a driver for 8 64-bit windows.  What can I do?

  Hello

  I had the same problem.  I was able to get around by loading the driver for Windows XP 64 bit from the Canon web site and then install the printer using the normal menu of 'install new printer' Windows 8.  If I remember correctly, I could have gotten an error message or two, but the printer appears in the printer window and ran very well.  Hope this works for you as well.

• EliteBook 840 G3: Driver for HP Elitebook 840 G3 to ACPI\HPQ6007 on Windows 7

  I'm looking for a driver for the unknown device "ACPI\HPQ6007" on the HP EliteBook 840 G3 for WIndows 7 64-bit OS. And I don't know which driver is the following.

  Any help will be appreciated.

  Thanks in advance.

  Hello:

  Try the link to the support page for your laptop... click on the download button blue on the right side of the page.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_169887_1

• Driver for HP Probook 430 G1 to ACPI\HPQ6007 on Windows 7

  Hello

  I'm looking for a driver for the 'unknown device' ACPI\HPQ6007 on HP Probook 430 G1 for Windows 7 64 bit.

  Please send my the druver or the download URL (I did look microsft and update the latest version), but still get the

  "Unknown device".

  Thank you

  Elazar

  Please use the HP 3D DriveGuard 6 software located on the page HP ProBook 430 G1 Notebook PC Drivers, software and Firmware.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation