External display using Vision Switcher issues

Similar Questions

• Connect the external display using VISTA

  I plugged the external monitor at the top of the Tower, but only get a blank screen on monitor. Lap Top is still as main screen.

  Hi Jim,.

  I suggest you to refer to the links and check if it helps.

  Add a second monitor

  Solving the multiple monitor problems

  Understanding multiple monitors

  Set up multiple monitors

  It will be useful.

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• Qosmio X 870-116: use of Intel / nVidia GPU internal / external display

  Hello

  I have a Qosmio X 870-116 which have 2 video cards, an Intel onboard and a more powerful Nvidia.
  My problem, I did not how to pass my screen on the Intel card and I see my Nvidia for the display external.

  Someone has an idea to pass on to my first display nvidia card?

  Thank you

  Hello

  Something like this isn't possible.
  You cannot use two cards simultaneously for internal and external display.

  First of all, you can switch between the external and internal view using the Fn + F4 (or just F4) function key

  Secondly the nVidia Optimus technology optimize the performance of the laptop perfectly without a GPU nVidia and Intel graphics card.
  Switching is automatic and requires no reboot of s for laptop.

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Does not work on Tecra A2 - FN or key how to switch to the external display?

  Hello

  Tomorrow (Saturday 6) I have to show a little presentation my Tecra A2 on an external display or projector.
  After that I have to install my laptop for the second time last month, the Fn or function keys do not work.
  With this problem I don't know how to work with the external display.

  Please can you advice?
  Sorry for my English at low altitude.

  Buist huh
  The Netherlands

  @J.Verberk
  Sounds you're a newbie and you're talking nonsence
  You comment is simply not qualified.

  @Hein
  You said that you have installed you mobile again. Did you use the Tosh recovery CD?
  If this isn't the case, I think this might be a reason for the FN key anomaly.
  After recovery use the laptop must switch with FN + F5 external peripheral connected to the laptop.
  If you use try beamer to turn the trap settings.

• Tecra S2 cannot switch to the external display

  With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

  Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
  Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

  I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
  Anyone who knows the answer / solution to this problem?
  Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

  Thank you

  Arjen

  Hello

  Well, as I know it is not possible to set the external monitor as a default monitor.
  I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
  During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
  I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.

• My iMac screen went black, I use external display?

  MY iMac screen went out or black.

  Always a good hard drive.

  So can I use an external display to log off

  and wipe the hard drive for recycling.

  Thank you

  Yes. Here is the information on your model:

  Connection of the screen	1 mini DisplayPort
  Display modes	Double view extended and copy video
  External resolution	Up to 2560 x 1600 pixels

• Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Advice appreciated!

  No, you can't.

• Can I use an iMAc as an external display for Windows laptop?

  I will be working from home for some time and have received an old laptop Lenovo. The screen is quite small. Is it possible to use my iMac 21.5 "fairly new as an external display for your laptop?

  Thank you

  Kyle

  Sorry to be the bearer of bad news, but this is not supported. The feature you're talking about is called target Display Mode, Apple is extremely clear on what systems are supported in use your iMac as a display with the target - Apple Support Display Mode.

• Using the external display with Satellite A100-PSAA9

  I have a problem when I connect to an external monitor of 2º, it connect but next it disconect, it's always the connection and disconecting. I did update the bios and the display driver, but I still have the same problem, what can I do?

  My operating system is windows vista.

  What do you exactly mean with disconnection and connection?
  The switch to internal and external display or the display on the external monitor will simply disabled.

  Have you checked the connection to the laptop computers monitor port?

• Satellite A10: RGB Port is not installed - can not use external display

  Satellite A10 the RGB PORT is not installed & cannot be used as external display. I tried to install the communication or COM 1. interrupt code. What are the possible solutions?

  Hello

  What did you mean by "not installed"?
  Generally, you don't need to install anything. You don't need any drivers for this port 3.
  Windows XP drivers should work properly.

  Please check device manager if there are errors or yellow exclamation points.
  If the problem occurs for a short time, you can try to use the WinXP restore tool.
  This tool will reduce the BONE until the start.

• HP Pavilion DV7 lid is broken. You want to use external display.

  My screen was damaged and I had a technician to replace it, but in the process, he broke the lid. The hinge brackets broke, scokets for the screw on the lid broke, and I'm unable to get spare parts, so I decide that I want to see if it is possible to disconnect the screen, remove the cover, because he just flip-flops it and use my TV as an external display.

  The problem is when I connect it to my TV via VGA or HDMI, nothing is displayed on the screen until the computer was started in Windows 7. Is there something I can do?

  Hello jcvamp,

  I understand that your screen is broken and you want to use an external monitor.

  You are able to use the external monitor, but as you say you will not be able to load BIOS.

  The BIOS can be displayed on the primary monitor.

• LCD-100-Pro-40N using as an external display

  Hello. I have installed CTS1300 and using LCD-100-Pro-40N as an external display.

  When I use previously third LCD (NEC LCD), I used DVI to HDMI cable between the telepresence and external display.

  LCD-100-Pro-40N must also DVI to HDMI Cable? Or HDMI to HDMI cable available since both are Cisco brand?

  Both cables may work, but Cisco recommends DVI-HDMI cable between codec and an external display.

  See you soon,.

  Hard

• T520/W520 external display issues

  Hello community,

  We have problems connecting to an external monitor via the Port replicator. In the BIOs, it is not possible to select the numeric value of 1 or 2. During boot no picture appears on the external display.

  It is very annoying because we want to use Pre-startup-authentication.

  problem is solved. We must choose the first dedicated graphics processor and disable recognization OPTIMUS OS