Driver for the Officejet 710 under Windows 7 64-bit

Similar Questions

• where can I find a driver for the laserjet m1120n under win 7-64 bit print network?

  HP LaserJet M1120n MFP, CC459A, Windows 7 64 - bi t. No network printing since I have new laptop with Win 7 64 bit. I'm going to change printer too?

  OK, well, maybe there are even more options.  Not sure it will work, but try:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• XP 64 bit driver for the Officejet 6100

  Given that HP is not a driver for the Officejet 6100 on a Windows XP 64-bit system, is there an unsigned driver or a work around to get an Officejet 6100 to work on a Windows XP 64-bit operating system?

  I tried to use the work of 990c but that didn't work.

  Hi Keith61,

  As far as I know that there is no actual work around to install a printer on a system that is not supported. Installing 990c drivers should have given you the ability to print. Can try one of the methods below to see if you can get the 990c driver to work or you can upgrade to a newer operating system. Let me know what you find?

  USB

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your Officejet 6100 printer using this driver.

  Wireless

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  8. open the Printers folder

  9. right click on Officejet 6100 and then select Properties

  10. click on the Advanced tab

  11. click on the drop down arrow under pilot to change the 990c driver and then click ok to accept the new driver.

  Try printing on your printer Officejet 6100 using this driver. I would like to know if you have the same problem?

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• I need a driver for my Deskjet 1220C on Windows 7 64 bit

  I need a driver for my Deskjet 1220C on Windows 7 64 bit

  Install the driver with Windows update with usb to printer connection.

  There is no downloadable driver available on the portal to suport HP for your printer. Available only for Windows 7 x 64 driver is provided by Microsoft.

• Photosmart 8450: Does the Photosmart 8450 under Windows 7 64-bit card reader work?

  Under Windows XP 32 bit card on my Photosmart 8450 network reader appeared as a network drive in Windows Explorer. Now that I've migrated to Windows 7 64 bit I get no network drive and if I put an SD card in the drive I get a 'map' mistake of access on the display panel. It is to be expected with the built-in drivers for Win 7? If so, is there no work around?

  Hello

  Thanks for the reply and sorry for not getting back sooner. Been strongly concerned about the end.

  I just find the solution to both problems.

  1. the card reader does not accept SD - HC cards. When I put an ordinary SD it worked fine.

  2 network drive mapping could not find the printer, even if I can print to it without any problems. I had recently also changed the router and discovered that the IP assigned to the printer was within the range of IP addresses assigned by DHCP. Changed static address to + 1.  Still did not work; posted in printer address was unidentifiable. Sitched printer, pulled ethernet cable outlet, turned on, plugged the ethernet cable. Bingo! The network drive works now.

• Driver for printer Oki C5500 on Windows 7 64 bit

  I have a HP desktop with Windows 7 64B. Is there a driver for the Oki C5500 printer available?

  Hi guys, FYI for win 7 users. Once clicking on install new driver package, click Add a new printer. When looking for finishing the installer, it will display 1 oki driver who has a model number that don't own you (OKI OkiLAN8300e Rev04.01 10/100BASE, ect). Click on it. You will then receive the disk button. This allows to choose your model.
  Installation instructions do not tell you this step and drove me crazy trying to figure out were the diskette provided button was and could not find the driver when I hit the Browse button.
  One last note. these steps have worked for the installation of the network printer. These steps should work for installation of the local printer as well.

  I hope this works for you and good luck.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• Re: There is no driver for the Officejet Pro 8500 for Windows 10?

  Tried to load the complete package of windows 8. did not work.  Tried it on 2 10 Windows - had already installed win10 and the other has been upgraded to win7.  I REALLY need to be able to scan.  Any suggestions out there?

  Thank you

  Welcome to the HP community @seamaster805,

  I came across your post about the problems you're having with installing drivers of Windows 8 on Windows 10, and I wanted to stop to help out.

  There are 10 Windows drivers available for your Officejet 8500, and you must install the full features drivers correct and the file of the software for it to work. See the image below and the link to get there. Try to install again and if you are having problems or errors during installation, let me know please and I will surely do my best to help you!

  • All-in-one printer, HP Officejet Pro 8500 - A909a

  

  Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

  Thank you

• Win7 x 64 native driver for the OfficeJet 6110 does not recognize the element of automatic duplex unit add-on unit

  After upgrading my laptop Lenovo T61 to Windows 7 x 64, I find that my OfficeJet 6110 unit automatic duplexer is not recognized.  The duplexer has worked flawlessly for 3 years under Windows XP, but apparently he is not recognized with Win7 x 64 native driver.  The auto duplexer unit is a standard HP brand option for this printer.

  The printer is connected to a USB hub, which is connected to my laptop.  The duplexer works fine when reconnected to a XP operating system with the pack of HP software/driver installed.

  Y at - it a trick to make the add-on unit unit duplex automatic, recognized and functional element in Win7?

  Thank you!

  Hello
  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• Driver for the officejet 4620 without usb cable

  I've recently updated an old desk that had vista to windows 7 32 bit. I am trying to establish links with the 4620 hp network printer but I need a driver that does not require a usb connection is there a driver for? Basic driver needs a 64 bit is that correct?

  Hello

  If your new 32-bit computer, you wouldn't need a 64-bit version.

  The drivers are located here: drivers

  Thank you

• Driver for the Officejet 6210

  I just downloaded the latest version of the software driver for my 6210.  This driver can be used on the Microsoft Vista operating system?  The former was not compatible.

  dommazz wrote:
  I just downloaded the latest version of the software driver for my 6210.  This driver can be used on the Microsoft Vista operating system?  The former was not compatible.

  I do not know what driver you downloaded, but you can download the complete driver compatible Vista recommended site Internet HP here.  There are also a few critical updates available, download and install from the site of HP here after installing the driver.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• I need a driver for the Officejet 150 Mobile, I use an iPad air

  I use an iPad with iOS operating Air 7

  Hello

  iPad Air uses no drivers, it uses apps and at this stage no app to Apple for the iPad printing using Bluetooth. iPad and IPad Air can print via WiFi using the following application:

  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.

• Center solutions for HP OfficeJet 6210 under Win 7 64 bit

  I'm looking for the HP Solution Center for my Windows 7 64-bit OS.  He was not an upgrade of Vista.  It is a new laptop (Copmaq Presario CQ62) for installation of factory Windows 7 x 64.  What I saw in my research involved a system of upgrading Vista to Windows 7.

  I have two printers that have the same problem.  An OfficeJet 6210 and an OfficeJet 4315v needs the center of HP solutions for scan.

  Am I try to download a Vista driver, try to install it, or is there a better solution.

  Any help would be appreciated.

  Hello world

  It there is no complete software functionality and the driver available for this older printer. You will need to use a third-party PDF program to scan in PDF format. You can use Microsoft Paint or Windows fax and scan to scan documents and photos. If you are interested in upgrading to a new printer, see the link below.

  HP trade-in program