Driver for wirless mouse

Similar Questions

• The mouse does not says "there is no driver for this mouse.

  Original title: Retractable Belkin Mini travel mouse

  All of a sudden my mouse has stop working.  It is said that there is no driver for this mouse.  I used it for about a year.  There isn't any software mouse in particular.  I don't know what could have changed.

  Hi Wandajenkins,

  1 did you do changes on the computer before the show?

  2. what operating system is installed on the computer?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit and see if that does the trick.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: As it was working fine until you can complete the restore of the system and check if the device works very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

   

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can also contact Belkin Support for assistance on the issue:

  Contact Belkin

  http://www.Belkin.com/au/contactus/index.asp

  Let us know if that helps.

• I deleted the driver for the mouse and the mouse and the keyboard has stopped working.

  I had installed an updated driver mouse and mouse keep locking up. The Windows troubleshooting information indicates that I have to erase the disc from the mouse, and then reinstall the new mouse driver. When I deleted the mouse driver, the mouse and the keyboard no longer works.

  The computer is running Windows XP with Service Pack 3.

  The computer is one that I built several years ago.

  I tried the things:

  1. I tried the ALT, left SHIFT + Number Lock which is indicated as mouse keyboard operation who has worked in the past.

  Well it does not either from the keyboard is dead.

  2. I tried PS2 Mouse and a keyboard.

  3. I tried a keyboard and a USB mouse. The system shows new hardware found and he wonder then click NEXT to load the driver. No mouse, no keyboard, so no click.

  4. I can't get into the bios, because I can't hit keys to vector in the bios during startup.

  5. I tried to load the Windows XP disk, but the startup routine ask me to hit any key to boot from the CD.

  I have no mouse or keyboard control and therefore cannot respond to any action required by the system.

  Does anyone know a way to solve this problem?

  Solution of my wife - buy a new computer.

  Have a better solution for this problem?

  Thank you

  Bill

  Always try a PS/2 keyboard.  Maybe your PC is not able to access the BIOS, because the keyboard is USB.

  What make / model of the keyboard / mouse "kit"?

• Need driver for Mobile Mouse 3000

  My Mobile Mouse 3000 (model 1359) does not work :( I downloaded the IntelliPoint software and tried to reconnect/synchronization of the mouse (by pressing the buttons at the bottom of the mouse and USB - lights are green fixed) but the mouse still fails.

  So, I go to the control panel (Windows XP 32-bit) looking for mice - it is detected but it says that the drivers are missing. I'm having a devil of a time to find the driver to download... someone can send me a link?

  Thank you!!!

  Yes, just download it again.  CRC errors indicate that there was an error in the Microsoft file transfer.

  If you have trouble, the direct hyperlink that uses the official download page is:

  http://download.Microsoft.com/download/1/3/B/13B6BCAA-603C-4F7C-B03E-2DC23E307D47/IPx86_1033_8.0.225.0.exe

  The file must be 14,709,624 bytes long.  The MD5 checksum is 61d37880daca3f9049925621e199834e.
  The SHA1 checksum is ed011df183df468e11315d785599573c20f8fd12.

  You can read and download the utility of integrity check Checksum of the file not supported inKB841290.

  Please vote if this is useful!  Please, click on Brand or propose as answer if that answered your question!

• Re: Could not find a mouse driver for my P300-156 running Windows 7 now

  Hello

  I recently upgraded my Satellite P300-156 laptop from Vista to Windows 7 32 bit (I'm not particularly computer literate and had no idea that this wonderful new operating system may not work properly on modern laptops).

  Had a nightmare, as when the computer starts, the screen is oversized and the keyboard and mouse do not work. It is somewhat intermittent - sometimes it doesn't. I had long conversations and many scans made by Microsoft and it seems now that the problem is that the drivers are not properly load. When we looked in the Device Manager you could see little yellow exclamation (knocks as he called them) bext for pilots to display and mouse and other pointing devices drivers.

  My Windows engineer took a look at this Web site and did not find a driver for the mouse and other pointing devices. Does anyone know if there is a there? I can't believe I maybe isn't able to use Windows 7 on this laptop and may need to go back to the agony of using Vista. It seems crazy.

  Hope someone may be able to help.

  Thank you very much.

  Hello

  You should try Vista 32bits touchpad, as I know, most of them is compatible with win 7. If it does not help you, you can try other models of Satellite:
  [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• mouse Dell MOA8BO - can't find driver for button/scrolling

  I'm sorry. I looked very hard, but I couldn't find a forum of mouse so I had to publish on printers. Hoping someone can help me.

  Desperately looking for the driver for this mouse. This is a wired mouse dell with 2 side buttons and a scroll wheel. http://www.techexcess.NET/images/products/Dell/Dell-RP962-WS690-WS390.jpg

  I'm looking for the driver so that I can configure the side buttons. Also the side scroll on the mouse does not right now. I guess that's because I don't have the driver.

  Otherwise right now, once I have connect my laptop (Win Vista, 32-bit), the mouse works very well with the left and do a right click and vertical scrolling. However I'm looking to set up the side buttons and the scrolling. Tried very hard to find the driver on the Dell Web (Drivers/software) site but this mouse is not yet listed. (actually I'm disappointed that they have no listed in all optical wired mouse)

  Help please! Thank you so much!

  Hi dellberry,

  I'm sorry for the inconvenience you have suffered. You to use the link below and download the drivers that will help set the programmable keys:

  http://Dell.to/U5ZqPb

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get a driver 64 bits for the mouse?

  I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?

  Original title: mouse drivers

  The game, August 28, 2014 16:18:16 + 0000, WILLROSS wrote:

  I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?

  I don't know if there is a driver 64-bit Windows 7 to your
  mouse. It's Logitech to decide or not to produce a.
  Check on their website to see if it exists. If not, you
  are out of luck, but fortunately that a new mouse shouldn't be very
  Dear.

• Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

  Hello

  I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

  I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

  When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

  Why would access denied?

  Any help would be great.

  I am running Windows 7 Home Premium

  See you soon

  Robert

  Hi Robert,.

  You receive this error during the installation of other USB devices?

  Usually this kind of error messages happen when we are not connected as an administrator.

  You can read the following article and check if that helps.

  Code 28: The drivers for this device are not installed

  Please return to the State of the question.

• There is no driver for my printer. Now what?

  How to install a printer inkjet (i.e. Deskjet, Photosmart, Officejet or PSC printers) on an operating system Windows that does not have driver officially supported

  With each new OS a lot of printers get left behind and a driver is never written to these printers.  There is no guaranteed way to get these printers working with an OS that is not a driver for them, but in Windows, there is a chance that you can make it work.  These steps are only for an inkjet printer.  A different generic driver would be used for Laserjet printers, and I will do a post split on this topic.  Note: It is not guaranteed to work.

  To install a printer is not a driver for Windows XP in Windows XP:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. click on Control Panel.
  6. make sure that you set it to Classic view.
  7. open the Device Manager.
  8. click on view, then select hidden.
  9. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  10. right click on the device and select install/update driver.
  11. a window will come with 2 choices. Choose "Browse my computer for driver software".
  12. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  13. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  14. in the manufacturers list, select HP.
  15. in the model list, select the Deskjet 990c driver or the driver for Deskjet 450.
  16. click Next.
  17. click on finish.
  18 try printing.

  To install a printer is not a driver for Windows Server 2003 in Windows Server 2003:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. click on Control Panel.
  6. make sure that you set it to Classic view.
  7. open the Device Manager.
  8. click on view, then select hidden.
  9. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  10. right click on the device and select install/update driver.
  11. a window will come with 2 choices. Choose "Browse my computer for driver software".
  12. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  13. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  14. in the manufacturers list, select HP.
  15. in the model list, select the Deskjet 990c driver or the driver for Deskjet 450.
  16. click Next.
  17. click on finish.
  18 try printing.

  To install a printer is not a driver for Windows Vista in Windows Vista:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. in the search box, type Device Manager.
  6. Select Device Manager from the list.
  7. click on view, then select hidden.
  8. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  9. right click on the device and select install/update driver.
  10. a window will come with 2 choices. Choose "Browse my computer for driver software".
  11. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  12. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  13. in the manufacturers list, select HP.
  14. in the model list, select the 990c Deskjet printer driver or the driver for Deskjet 450.
  15. click Next.
  16. click Finish.
  17 try to print.

  To install a printer is not a driver for Windows Server 2008 in Windows Server 2008:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. in the search box, type Device Manager.
  6. Select Device Manager from the list.
  7. click on view, then select hidden.
  8. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  9. right click on the device and select install/update driver.
  10. a window will come with 2 choices. Choose "Browse my computer for driver software".
  11. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  12. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  13. in the manufacturers list, select HP.
  14. in the model list, select the 990c Deskjet printer driver or the driver for Deskjet 450.
  15. click Next.
  16. click Finish.
  17 try to print.

  To install a printer that isn't a driver for Windows 7 in Windows 7:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. click on the start menu.
  5. in the search box, type Device Manager.
  6. Select Device Manager from the list.
  7. click on view, then select hidden.
  8. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  9. right click on the device and select install/update driver.
  10. a window will come with 2 choices. Choose "Browse my computer for driver software".
  11. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  12. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  13. in the manufacturers list, select HP.
  14. in the model list, select the 990c Deskjet printer driver or the driver for Deskjet 450.
  15. click Next.
  16. click Finish.
  17 try to print.

  To install a printer that isn't a driver for Windows 8 in Windows 8:
  1. connect the device to the computer.
  2. Windows will try to find a driver but will not be able to.
  3. close the notifications popping up.
  4. hold your mouse in the upper or lower part right corner of the computer screen to show the charms. If you have a touch screen, you can drag your finger left from the right edge of the screen.
  5. click on search.
  6. in the search box, click settings.
  7. in the search box, type Device Manager.
  8. Select Device Manager in the list on the left.
  9. click on view, then select hidden.
  10. you should see a device in the list with a yellow triangle with an exclamation mark inside.
  11. right click on the device and select install/update driver.
  12. a window will come with 2 choices. Choose "Browse my computer for driver software".
  13. in the next window, select "Let Me pick from a list of drivers for devices on my computer.
  14. in the next window, make sure that the checkbox next to "Show compatible hardware" is not selected.
  15. in the manufacturers list, select HP.
  16. in the model list, select the class of PCL3 Deskjet driver, the Deskjet 990c printer driver or the driver for Deskjet 450.  You can also try the driver Officejet PCL 3 class or the class driver Photosmart PCL 3 if others do not work.
  17 click Next.
  18. click on finish.
  19. try to print.

  I hope this helps.

• Tecra 9100 - required accupoint driver for XP

  Hello

  I need a MS XP driver for the accupoint of my new (used) Tecra 9100. Or at least I think, because the accupoint does not work and there is no configuration on the menus of the mouse tab.

  On the driver download page http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU I don't know which is the "driver type", I have to choose.
  Can someone help me?

  Thank you

  JS

  There is no available accupoint driver for Tecra 9100 and Windows XP.

  I searched on the Web from Toshiba site too and I looked in the installation instructions, but there is no driver available.

  Sorry, but it's done.

• Question about updating the driver for the graphics card Intel HD on satellite C series

  This keeps coming up when I use the 2.5 Update utility driver Intel (r)

  "A custom computer manufacturer driver is installed on your computer.
  The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver
  instead of the custom computer manufacturer driver may cause technical problems.
  Contact your computer manufacturer for the latest driver for your computer.

  Should I change "Driver from the computer manufacturer custom" for the generic last by (a "driver Intel) - https://downloadcenter.intel.com/

  I'm looking for the option that gives the best fps

  Intel HD Graphics Info:
  http://prntscr.com/b6ujgb
  System information:
  http://prntscr.com/b6ukbs

  I have to install the driver manually, with exe it will not work.

  http://www.Intel.com/content/www/us/...000005629.html

  1. Download the graphics driver ZIP file. Unzip the file to a designated location or folder.
  2. Open the Device Manager:
  3. For Windows 8 and 8.1 Windows: press the Windows and X keys simultaneously.
  4. For Windows 10: Right mouse click on the Windows Start icon
  5. Click Yes when you are prompted for permission to the user account control.
  6. Expand the display of the maps section.
  7. Right click on the entry of Intel® graphics and select Update driver software.
  8. Click Browse my computer for driver software.
  9. Click Browse and select the directory where the driver files.
  10. Click Next. Drivers are being installed.
  11. Restart the computer when you are prompted.

• Satellite Pro M70: Where to find the new driver for intel 915GM

  I downloaded the new driver for the chipset intel 915GM, and when I install games doesn't seem to work properly, that is to say he's going to choppy when you move the mouse over the buttons.

  If I go back to my old driver, everything seems fine. I don't mind using an old, I'm just confused why it will not work properly. The Readme file included with it just confuses me, but it says something about the installation of a patch for its hi-def?

  Hello

  I have the same unit but with inside ATI graphics card. Sorry if I misunderstood something, but why you want to install driver chipset? Must the chipset driver be updated until you try to install the graphics driver?

  In any case I recommend you to use only the designed Toshiba chipset driver. It is tested and adapted for this hardware platform. I'm not 100% sure but I assume that your graphics card is with shared memory. Am I wrong?

• Touch Pad Driver for Satellite A50?

  I reinstall my old Satellite A50 with Win XP without the recovery CD can not find a match with the model or S/N on the Toshiba support pages well. The touchpad driver I downloaded (pointing device Alps, worm 6.0.303.4, dated the 11.12.2003) seems to be OK with the material only problem is that I can't find the right software for Toshiba TouchPad on / off? I installed what I believe is the correct software and it shows in the Panel under the mouse/TouchPad configuration, but only as inactive (gray). Any suggestions would be much appreciated.

  > Can't find a match with the model or S/N on the Toshiba support pages well.

  Drivers for Satellite A50 lie on the European driver Toshiba page.
  Because the A50 is an oldie, the drivers have been moved to the archives.
  You should choose an archive in the type of product, and then you should find the driver for the touchpad too.

  You also need to install the common Modules and Touch Pad on / off Utility v2.05.00.
  Both are here too!