Safari is unable to establish a secure connection

Similar Questions

• Open C ZTE Email SSL/STARTTLS [bad-security] - unable to establish a secure connection

  I just got the open C of ZTE in mail Friday. I run through the configuration of my phone.

  I can't get my email because of the [bad security] error SSL/STARTTLS. I guess that it is my ISP because of a self-signed certificate. A solution to this been created yet? Will be he never fixed. If this isn't the case, I can send my phone to them right away and get my money back.

  DreamHost has valid certificates. However, the certificates that they are for *. mail.DreamHost.com and will not cover your area of vanity. The correct server to use for dreamhost will be one of:

  • SUB3.mail.DreamHost.com
  • SUB4.mail.DreamHost.com
  • SUB5.mail.DreamHost.com
  • homie.mail.Dreamhost.com

  For my "asutherland.org" vanity domain which is hosted at dreamhost, I use the command "digging" to avoid having to go to their panel interface.

  I type: dig mail.asutherland.org
  This translates into:

  SECTION OF THE ANSWER:

  mail.asutherland.org. 14400 IN a 69.163.253.135

  Then I type: dig - x 69.163.253.135
  which translates into:

  SECTION OF THE ANSWER:

  135.253.163.69.in - addr.arpa. 14400 IN PTR sub4.mail.dreamhost.com.

  Which is how I know to use sub4.mail.dreamhost.com.

  We do not want to improve the Setup autoconfig for dreamhost. Unfortunately, it will take a new development from us unless dreamhost implements proxying IMAP so that only one IMAP server can be used.

• Bug Safari: could not establish a secure connection & search bar problem

  I'm hosting a server wiki on one of my macs and he got a self-signed certificate (the one generated by the server application). Since a few days ago (10.11.3 upgrade could be the culprit), Safari cannot establish a secure connection, no more. Oddly enough, this kind of coincide with the search box issue as well, which has been documented elsewhere.

  I checked, the certificate is marked as "always trust" in my keychain. I can access the wiki perfectly in Firefox for example.

  What a paradox, that I have to use third party software to access a software solution Apple...?

  Please let me know if you have had the same problems and if you managed to solve it.

  Thank you

  HE'S

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• BPOS error "could not establish a secure connection t server. Please check if you have installed the required certificates.

  Hello

  We use the Microsoft Online Service in our office.

  The user is confronted with the question by connecting to the Microsoft Online Service, it gives the error could not establish a secure connection t server.  Please check if you have installed the required certificates.

  The one you suggest to fix the problem

  Thank you

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

• The message to dropbox who cannot establish a secure connection

  Original title: could not establish a secure connection to Dropbox

  Recently, my dropbox could not "establish a connection," citing error clock.  The clock is accurate.  Dropbox makes a connection secured in safe mode and updates.  Until last week, it works beautifully. Have not installed new anything except the windows updates.  What can I do?

  Hello

  Thanks for posting the question in the Microsoft Community!

  You get a message with dropbox, it could not establish a secure connection.

  1 did you do changes on the computer before the show other than the installation of the Windows updates?

  2. what browser do you use?

  I suggest you to visit:

  https://www.dropbox.com/help/159/en

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• I can not get information about the location of the images geotagged - the message is "unable to establish a network connection to Windows Live Local". Previously, I had a lot. Suggestions? Thank you.

  After a lot of use of this feature of Pro Photo Tools to secure the location for my images geotagged information, I am not not able to do. The error message indicates, as seen above, I am unable to connect to "Windows Live Local." I have Windows XP Pro with service pack 3. I reinstalled Photo Pro and nothing has changed. My Images are jpeg. But being the difficulty in logging on to Windows Live Local, these things, I think, are not important. Any suggestions? Thank you.

  Hello

  I suggest you to post your questions in the Windows Live forums for assistance.

  Here is the link: http://windowslivehelp.com/

• Message "Make a secure connection or the server unresponsive" when you try to enter online banking.

  Original title: I can't have my bank account online or in some Web sites. I get the message cannot establish a secure connection or the server unresponsive. What should I do?

  My internet is connected to my Dell PC and via a router, I run my ipad is the same problem on both

  Hi Sally,

  1. What web browser, you're helping to connect on the Web site?
  2. What is Internet Explorer? If so, which version?
  3. You can log in to other sites very well?

  If you are using Internet Explorer, follow the steps in the article mentioned below. Let us know if this helped.

  You cannot connect to or connect to Web sites in Internet Explorer secure

  Note: The reset of Internet Explorer removes any changes made to Internet Explorer since it was installed, but it does not delete your Favorites or flows.

• Unable to connect to google after installing windows 10 "secure connection failed".

  I installed windows 10 today.

  now, every time that I can't get to google/youtube to firefox, internet explorer and opera.

  I get this error:

  "Secure connection failed".

  The connection on www.google.com while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem."
  

  I would appreciate help, google and youtube are rather important

  Sorry for the delay, long day away.

  With this many cross-browser issues, can you confirm that your system clock date, time, and time zone are all correct? SSL validity checks are time sensitive.

  If you see a globe, I think that you are unable to use an HTTPS address. Usually Firefox displays a padlock or a "!" icon in the shape of triangle on a HTTPS address depending on whether the certificate withdraws or has a problem.

  Is there a code in parentheses, separated by underscores in the error page? If so, could you copy and paste this code.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Secure connection has no error - for almost all sites!

  Mozilla Firefox began vomiting following for almost all Internet sites error message I usually access!

  The error:

  The secure connection failed

  The connection to the server was reset while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the web site owners to inform them of this problem.
  

  I use a laptop computer Lenovo z580 with Windows 7 Home Premium with Firefox installed 41.0.2.
  I checked the proxy settings, and they are the same in Firefox, like in other browsers (IE and Chrome).
  I checked the settings of the system time, and there is no problem there.

  I'm unable to download images for a reason, so I downloaded the images (of the error messages for different Web sites to http://s912.photobucket.com/user/sushd/library/Firefox

  Any help is appreciated.

  TIA

  Make a check of malware with several malware scanning of programs on the Windows computer.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• "Secure connection failed" after update to firefox 39

  After update to firefox version 39 I am unable to pay the bill online, purchases invoices etc and received this message "secure connection failed".

  An error occurred during a connection to acs.onlinesbi.com. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Report this error.
  Please help me how to solve this problem. Thank you.

  This indicates that the site is by default an obsolete encryption encryption algorithm that is vulnerable to the attack of 'Blocking' which was in the news earlier this year.

  You can turn off these old present in Firefox to try to force the site to his game. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste dhe and make a pause so that the list is filtered

  (3) double-click the preference security.ssl3.dhe_rsa_aes_128_sha to true to false (disable Firefox to use this encryption)

  (4) double click on the security.ssl3.dhe_rsa_aes_256_sha preference from true to false (disable Firefox to use this encryption)

  Then try your payment site. Any improvement?

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.

• Problems with 9000 device establishing a socket connection?

  Edit again: still a problem, see Update 2 to end...

  My app works fine on 4.3 & 4.5, device and Simulator. Also works very well in the 4.6 Simulator. However, on the bold new we just acquired today, I can't do the blackberry establish a socket connection. As far as I can tell a call to Connector.open which has the form:

  String connUrl = "socket://:;deviceside=true";StreamConnection sc = (StreamConnection) Connector.open(connUrl);
  

  .. will never return! I set breakpoints after him in the file and I get nothing. There is no sign of a connection through to the other end. I put a breakpoint on the line with Connector.open so I know is to be worn, but if I click on 'no more' control is never returned to the jde debugger.

  I realize in Application 4.6 permissions have been moved around, but I've set manually the application has permission to connect to the internet. I tried to connect to a server, I know that the blackberry can access (e.g. www.google.com), I expect this to cause then an exception more than my application is obviously not HTTP... but nothing! No indication the Connector.open never call does not return. No exception seems also to be thrown, ControlledAccessException or other... can someone guess what might be happening here? It seems that it is a fundamental thing to do, I don't see what could have changed. My thread Manager program is still running behind all that (I see his messages to regular use of ram) isn't as all users of the application are overwritten or anything.

  My request is signed, I checked several times. I can also access the internet as usual from the blackberry browser. It is also interesting to note that, on the debugger to connect to the device, told me debugging information are missing about two - net_rim_cldc and net_rim_os modules if I remember correctly. Then, he said because of this "many debugging features will not work properly", but as far as I can see, willing or not, debug this connection is simply not be established, and yet no exception or anything is up. The above code is surrounded by try/catch that will catch java.io.IOExceptions and ControlledAccessExceptions, among others, but none of this code is already hit. And surely if it was some type of more exotic exception that I have no intention, I would like to at least get a popup on the screen tell me about an uncaught exception?

  Help would be greatly appreciated!

  UPDATE: standard Version, as soon as I had finished my half hour trying to get this thing to work and then wrote a post about the epic forum, he begins to work. Perfectly as I can tell. I guess it could have been a little temporary bad service from my supplier... Oh well anyway we are all good now...

  UPDATE 2: it appears when wifi connections aren't a problem, but if I turn off wifi problem remains. Any ideas?

  How long did you wait for an exception?  It must expire after 2 minutes if it is unable to connect.  Which way you make the connection?  You use the deviceside parameter?

  The BlackBerry has been activated on a BlackBerry Enterprise Server?  You have completed the information under Options, Advanced Options, TCP APN?  The BlackBerry shows 3G on the home screen (capital G)?