Driver hard disk error

Similar Questions

• 'Built by HARD disk error' in Portege R200

  Hello

  My Portege R200 shows "built-in HARD disk error" start-up. " In the BIOS screen, it says "no drive" on the HARD drive.

  What should I do? I checked the connection and the drive is connected to the fine. I heard no noise when starting.
  Is this HARD drive problem? or maybe motherboard? Help!

  Lee

  The HARD disk rotates upward?

  Try resetting the BIOS to default settings.

  Other than that, I think that it's not just you can do except send the laptop to a repair center.

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• G2F98PA #UUF: I have a HP Pavilion x 360 - Smart hard disk error 301 convertible.

  

  You must back up all important data and replace the hard drive.

  S.M.A.R.T.

  You can run a HDD diagnosis to confirm the hard disk error.

  Test of hardware failure

  You can check if your system is still under warranty with the link below.

  Check the warranty

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• SMART Hard Disk Error - replace hard disk?

  A couple of days, I got an error when I start my computer (HP Pavilion dv6-6071eo), saying "SMART hard disk error" followed by a message telling me that SMART disk check has detected and imminent failure. He told me to my backup files, and then press F2 and do a hard drive test. On the last row, it displays "Hard Disk 1 (301).

  I tried to run the hard drive test, which does not instantly. I also ran the BIOS hard drive test. It meets the short test without problem and then stopped quite some time after the long trial began with the error "Disk Hard 1 full 305. My computer has also been slow over the last week.

  From what I've read so far, it seems that I need to replace my hard drive. Is this correct? If so, it would be a suitable replacement (functional): http://www.dustinhome.se/product/5010151237/western-digital-black-2-5-320gb-7200rpm-sata-300-16mb/#i.... Also, would it not interesting (and possible) upgrade to an SSD for reduction of noise and heat, which is a problem with this laptop (and several other portable simular at HP) compared to other laptops.

  In addition, it might be good to mention that my warranty has expired.

  Have you checked to see if there is a free space left on the hard drive? A complete hard drive will make the system work very slowly and it may also keep the system working properly if it is fairly comprehensive. The fact that you take the short test means that there is nothing major to mechanically wrong with the drive. Just right-click on the icon for the main C:\ drive likely "computer: and select 'Properties'.» If the disc is not actually full, then I suggest to replace. If you can afford a SSD, Yes, there is no doubt that is the way to go. There is nothing wrong on one ssd, other than an occasional fight to install it. I have been using SSD for awhile and I had installation problems we often see reported here, but do not be discouraged, we are here to help.

• Windows 7 Pro repairs hard disk errors

  My hard drive had errors and corrupt sectors.  I ran the tool to fix my hard drive and now need to repair the operating system.  I am running windows 7 pro legal copy of course as always.  What is the best way to repair windows 7 without having to redo my computer everything and start again.  I know that there are some missing files due to hard disk errors because strange things are happening now and some things do not work properly.

  E-mail address is removed from the privacy *.

  Trevor Walsh

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Smart hard disk error: "Press enter to continue and it starts OK.

  I have run chkdsk full and sometimes without error, but at startup it says Smart hard disk error. Press ENTER to continue and it starts OK

  Go into the BIOS and run the drive Diagnostics (long version).

  Normally, when you get a SMART disk error this means imminent disk failure.  Smart drive test checks the environment of hard disk and is much more than chkdsk thorugh.

  A cautious soul would replace the disc if the diagnostic test is a failure.

  Is your laptop still under warranty?

  Best regards
  ERICO

• SMART hard disk error message

  I have a Pavilion dv4-2045dx and I got the "SMART hard disk error" message since last night after my daughter felt my cell phone and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do.

  Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Hello

  GeneiRene wrote:

  I got this error since last night after my daughter felt my laptop and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do. Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Sorry to bring bad news, but... If you have a SMART hard disk error then the drive is toast. There is no way around that.

  The INTELLIGENT notification system gives you a report that the BIOS sees when it queries the hard disk during the Power On Self Test, he always does before the start in the Windows operating system.

  I hope that you have created a set of HP recovery cd. If you did, then you still have your operating system intact. If you do not, you can buy a replacement of HP recovery disk. They are inexpensive.

  Best regards

  ERICO

• HP LAPTOP: SMART HARD DISK ERROR

  Hi rebotted my laptop not had long and it is now coming up with smart hard disk error?

  -What can I do or I just take it back.

  Hello

  If you're still on schedule when you can return the laptop, then this is what I would say - a Smart error would indicate that the hard disk is running out.

  Kind regards

  DP - K

• 3rd Master Hard Disk Error.

  After the computer restarts, it starts my computer has a "3rd master hard disk error".

  Now, I know it's bad, but could someone tell me how it really is.
  Is it possible to relieve this problem.

  Note:
  * I was able to log on after several attempts, but then all trying to save something is crashed and I got the error again.
  * Computer is only 5 months.
  * Never add any material.
  * Can enter Windows once in a while.
  * Was working fine, and then one day we shut the computer down and start the computer receives errors.

  Hello needshelpbad1,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Since your computer is relatively new, I could contact the manufacture and see what they can do to help with this.  However, to be proactive, I posted a link below that other users have had similar problems and there is resolution that can run or you.

  This should point you in a direction to answer your question or solve your problem.

  Third master hard disk error

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drive problem hard "smart hard disk error".

  Hello, about 6 months ago, I bought my HP envy m6-1252so, and since then it has been slow til to get totally stuck showing the "blue screen" error message, a month later, I turned on and showed me the message "no device found", then I went where I bought it and they said it was a software problem. That's why the guarantee would not fix because it takes that hardware problems (I have 3 years warranty). A friend, who is a maintenance-pc professional told me that the hard drive has problems and he screwed up, he has absolutely everything deleted hard disk ensuring that it would be totally free from virus and he reinstalled windows saying that I'm having the same problem soon, I had since re - install windows all almost 2 weeks because that the problem won't let me run windows showing me the message "error of. smart disc"and it could not connect to windows. My question is how could get my replacement of hard disk without having the same answer "it's a software problem?

  Sincerely, Milton.

  Milton,

  The "SMART Hard Disc Error' returned by your computer indicates that the hard disk has failed or is about to fail. Please see test of hardware failures (Windows 8) and/or test a hard drive in the BIOS for instructions on testing your computer for a hard disk failure. If the error codes are returned or a test does not complete, please contact the official HP support in your region / country, via the Portal to support HP worldwide, to file a warranty claim.

  You will need to use the HP recovery media, you created when you first set up your computer to restore the computer to a factory state after the hard drive has been replaced. If you create your personal HP recovery media, also contact HP support in your region / country, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Drive SMART hard disk error no boot device

  I have a HP pavilion dv7-4170us, and I got an error when I turn it on. I finally bought a new hard drive to replace my hard drive but now nothing works. It says error hard drive SMART, it detects an imminent failure and I needed to back up the content and then run a hard drive test in the diagnostic system. I did a test drive and it says failure with failure id: product GG3SXH-5JW77L-XDOO3F-609AO3 id: XH1O4UA #ABA. I can get anywhere on my computer to save anything and when I turn on the hard disk, it is said to put a bootable device but I did not. Help, please!

  No, I just needed to get revovery media dvd and then I have can use my new HDD is I did fjnd but thanks!

• SMART hard disk error (301)

  I WANT m6-1120sw my friend. When I turn it on it shows SMART drive hard error, said diagnosis: "SMART Check: NOT AVAILABLE, short DST: caution. His old HDD, I replaced it with a new one, but nothing has changed. -What would be a problem with the SATA controller on the motherboard or is it something different?

  Hello
  
  Smart disk error indicates failure of hard drive. You still get any ID failure?
  
  Since you have already replaced it & not showing is not available, the probability is for the connection by defective SATA cable or SATA controllers or motherboard itself.
  What of all the other disk hard test - wide?
  
  Try HD Tune Pro software currently running on the system.
  
  You may have to contact HP for repair.
  
  Thank you

• Satellite L - drive HARD recovery error

  Hello

  If someone could help? I tried to run the hard drive recovery, but he got the following error message.

  Error: F3-FF00-0006
  Unable to get the ID of the specified partition.

  If you know all the keys to enter the hard disk again pls let me know. I tried to enter the Recovery Wizard, but the system continues to operate a diagbostic or something. Ask me to insert the network cable and then also requires a boot disk and keeps current and on. I tried to restart, but it's the same...

  see you soon
  NOx

  Hi nox,

  Strange what s...
  You also have a Toshiba Recovery disk? If so, try it please. Perhaps only something is wrong with the HDD recovery procedure.

  In the worst case, it s associated with RAM or HARD disk as Akuma writes. So download these special testing tools! :)

• HP 23-g116 5CM44802Q5: smart hard disk error

  I just started to have an error...  Error Smart hard drive on my desktop and it has only 1 year.  What could be the problem.  y at - it an easy fix?  May not have a hard drive problem, it is not used every day.

  Hi katcopass,

  That looks like you have a hard disk failure. To make sure that we should launch a hard drive diagnostic.

  To access the menu diagnostic you want to start typing the ESC key as soon as you turn the unit on and it should bring you to the start menu. Press F2 it and it will bring you to the diagnosis.

  If the diagnostic fails, it should give you a failure ID 24 characters; in this case, you want to exactly copy down and call customer service. According to the model, there are three main numbers:

  • For the home and specific products, dial + 1 800 474 6836 (e.g. ENVY, Pavilion, lines of spectrum)
  • For the company's products, please call + 1 800 334 5144 (e.g. Prodesk, Probook, Pro tablet lines)
  • For Elite Business Products, call + 1 866 625 1175 (Elitedesk, Elitebook lines Elitepad)

  You will need to provide the following information to the representative answering:

  • Serial number
  • Product number
  • ID failure of 24 characters

  Thank you!