Driver P6 8.3 typical Installation problem Oracle professional

Similar Questions

• Options to upgrade to internal hard drive on laptop computer dv2000t (installation problems)

  I need to replace a failed hard drive in my laptop dv2000t of 2006.  The drive I'm replacing was already a replacement car from the original 80 GB drive came with the laptop.  The first replacement 3 years ago (2008) was a 200 GB drive, which worked well for about 3 years.  But he just crashed (apparently).  I received warnings of imminent failure in 'Smart' car a week before, and then it finally is more start.  Subsequent tests on the extract disk show it as having failed in many sectors.

  I had no problem to order a spare for the first time in 2008, restore a backup image to original disk Acronis, installation, etc.  Everything went well in 2008.   So I assumed that all would be gone smoothly for yet another replacement and upgrade.

  In 2008, the drive I ordered was a W.D. (Western Digital, stick with the same brand as the original) disk SATA 2.5 inch 5400 RPM (200 GB).  It's a SATA (I) (1.5 Gbit/s interface).

  The first disc I ordered recently (March 2011) was a W.D 2.5 inch SATA II (3.0 Gbps interface) 500 GB 7200 RPM (from 'Black Scorpion' line of W.D.).   Got the disc image disc to it and she came to the laptop.  Unfortunately, at the start and after the screen BIOS, all I get is a black screen with a white cursor blinking fast at the top of the screen.  Apparently by car is not recognized by the computer?  Then I did some reading in some online forums and found some references on this laptop is made not with the capacity of disks more or 320 GB with 7200 RPM drives (because they're hotter than 5400 drives).  And finally, references to the SATA interface speed.  I ordered a 2nd drive, W.D "Scorpio Blue" line, this time above a 5400 RPM 320 GB drive (but still SATA II).  Same story, still does not work.  So I decided that maybe the question was the SATA speed.  So I found someone who still had a SATA plus old (1.5 Gbps) W.D. drive in stock.  It's a W.D. SATA 250 GB (no longer manufactured).  It should arrive in a few days - and I hope this one works!

  I would like to get some sort of confirmation on the white flashing cursor on the black screen at startup.  Is this typicalif the system could not find a bootable hard drive?  Also, is this SATA or SATA-II issue a probable cause of my problem?   I'm sure that there is nothing wrong with the new drives themselves and images restored on them, as readers will be installed them and available when I plug them in as external drives on my other computer.

  I was able to solve my hard drive installation problems.  It turns out that there is no problem with any of these new replacement discs, I ordered (thinking I had ordered some readers with the wrong specs).  It was a simple solution to the problem.  Restored readers were not start because there is no MBR (Master Boot Record) on the disks after restoring from disk images.

  I use Acronis True Image Home 2011 as my (backup) disk imaging software.  And I just did not understand how to restore properly backed up images on a new hard drive.  I had done everything right except that I had not checked the box to 'restore the MBR' - both do not understand what it was or what it means.  Once I checked this box and reimagee the new drive, it worked fine.

• Agilent 4156 new driver plug-and-play (pulse-installation problem)

  Hello, I am new to Labview and just started using the Agilent 4156 new plug-and-play driver published on 02/12/2008. I try first to set up conditions of STRESS using this project. While I am able to configure most of the things that I need, I can't set the peak pulse value using the program "Set Pulse.vi". The Readme for the driver mentioned that this program has not been tested. The error message is the following:

  Reports of the instrument:
  + 181, "illegal installation. Invalid command. »
  -113, "undefined header."
  + 0, "no error".

  Can someone help me with this problem?

  Thank you.

  Thanks for your reply.

  I think I solved the problem. There are syntax errors in the "set up" Pulse.vi (PUL has been used instead of PULS in two places). He is now able to set the basic and advanced.

  In addition, the way is designed the vi, it will always give an error because he tries to put in tension (possible only when a VIEW is of type V) 'Source' and 'Base' / 'Peak' tensions (only possible when the PGU is a type VPULSE). I removed the parts that I didn't need.

  FYI, I use an Agilent 4156 C. In the configuration screen, the revision of the CPU is 1 and the revision of the software (03.06 HOSTC, CUMS 04.07, ADC 01.00).

• OWB installation problem: oracle.ide.ExitNowAllowedException

  Hi experts,
  
  I am facing a problem during installation: I use an Oracle Enterprise Linux 5.4 with the Oracle 11 g 2 database.
  
  I unlocked and changed the password to the user OWBSYS, I begin the installation by following this tutorial
  
  http://www.Oracle.com/technology/OBE/11gr1_owb/owb11g_update_getting_started_intro/Lesson1/less1_start.htm
  
  but after step 'Repository Wizard summary' (step 14 in the tutorial), one before starting the actual installation, I face this error:
  
  "+ Warehouse Builder workspace owner installation failed on the OWBSYS user. +
  + Exception occurred in "processLoadJavaToken". +
  + oracle.ide.ExitNowAllowedException +"
  
  Does anyone have the same problem?
  
  Thank you!
  
  Published by: user9129903 on April 21, 2010 12:59
  
  Published by: user9129903 on April 21, 2010 12:59
  
  Published by: user9129903 on April 21, 2010 13:00
  
  Published by: user9129903 on April 21, 2010 13:00

  Hello

  You can use the Assistance of repository directly instead of start > programs > {your Oracle - OWB11gR1clientHome} > Warehouse Builder > Design Center---> management of the workspace?

  You can access support from repository start > programs > {your Oracle - OWB11gR1clientHome} > Warehouse Builder > Administration > repository support

  You can also run the reposinst.bat script is located at \owb\bin\win32 to call Assistance from repository

  Then follow the steps in the tutorial.

  Thank you
  Fati

• P10-804: driver under XP Pro SP1 installation problem

  Had a hard drive crash, so I had to reinstall everything and decided to abandon the XP home to XP Pro.
  I have download all the drivers from this site (following options: laptop product type;) Family by Satellite; Series of products P; Model P10; Xp Pro operating system. Driver type Country UK. Language English;
  Install Xp and then set about installing the drivers.
  Unfortunately, many of them produce a message "can not be installed on this system.

  More precisely:
  Touch Pad on / off says "cannot install this version of the key we / Off utility to your system.
  Management of the Bus system says "integrated the SM bus driver is not compatible with cards of Bus SM installed on your system"
  Standby power controls said 'Impossible to install this version of the Toshiba Power utility by integrating your system'
  and there was another which I don't remember.

  Therefore, the device manager tells me that
  Other devices: device Base system; SM Bus controller. and (USB) Universal Serial Bus controller do not installed the drivers.

  Why the these drivers are not compatible with my system?
  Where can I get the proper drivers from?

  TFAI

  PS: And in addition, is not at all clear how to install the driver for the SD memory card (there is no .exe)

  Hello

  First of all something about the installation of the reader;
  You need not always all .exe files for installing the driver. If the setup.exe is not available, you must install the drivers in Device Manager. There, you have to choose the device and install the driver.

  I m not 100% sure why you can not install the drivers but it is very important that you need to install drivers in the correct order. The chipset driver must be installed at the beginning.
  Also, I noticed that there are several driver updates. For example of the Touchpad, utility, energy saving, etc., you must use the right version. (latest version)?

  Also check the update of Microsoft Windows XP SP2 fact sheet.

  Good luck

• Installation problem Oracle 11 g Linux - HEADSET - EXCEPTION of HOST UNKNOWN

  Hi guys,.
  I have a big problem. I installed the Oracle 11g database in an Oracle Enterprise Linux environment, but I got problems to implement the LISTENER.
  
  All ports were busy, but in the log file, the question is different:
  Taken UnknownHostException: oel64: oel64
  Taken UnknownHostException: oel64: oel64
  
  I use VMware Player.
  
  I tried to put in place the listener in free and open ports, but without success!
  
  Could you please help me?
  [ ]'s

  926757 wrote:

  sb92075 wrote:
  >

  192.168.136.135 is a little different from 192.168.0.1
  Why the difference?

  Rename or delete the listener.ora file (because it is NOT required, then do as below

  lsnrctl start

  The command COPY & results then PASTE all come back here

  -----------------------------------------------------------------------------------------------------

  I think 192.168.0.1 is local IP and 192.168.136.135 internet IP.

  HUH?

  Replace 192.168.0.1 in/etc/hosts 192.168.136.135 & then do as below

  lsnrctl start

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• Creating a program the evolutionary IVI driver installation problems

  I have problems when you try to create an upgrade for an IVI driver installation.
  I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
  1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

  My problem is the following:

  • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
  • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
    "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

  I noticed the things so far:

  • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
  • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
    What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
    According to the results of this audit, the installation process is abandoned.

  If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
  Maybe I put just an evil version information field, but I do not know that which (if any)...

  Advice would be greatly appreciated!

  I seem to have found a solution:

  The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

  So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

  Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

  This can be accomplished using the Orca tool included in the Windows SDK.

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• Oracle Database 11 g installation problem: ORA - 12560:TNS: Protocol adapter error.

  People,

  Hello. Initially, my Windows XP host name is 'localhost' and IP 127.0.0.1.

  I installed Oracle Database 11 g with Windows XP successfully and all customers in the database with the database instance running.

  For some reason, I uninstalled all of the database server and remove the whole installation directory /oracle.

  I have configured the address IP of Windows XP in 192.168.196.101 to ping other machines.

  For my needs, I installed Oracle Database 11 g with Windows XP again. During step 7 of 8: Oracle Database Configuration Assistant, I got this error:

  ORA - 12560:TNS: Protocol adapter error.

  I click on the button "Password management", there is no line in this window (no user name, no account of the lock).

  I have check the listener as below:

  C:\ > lsnrctl
  LSNRCTL > start
  His output: earphone HEADSET name has already been started.
  LSNRCTL > status
  Its release:... Service DB1 has 1 instance. The instance BD1 ready state. The command completed successfully.

  I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is:

  Listen [0] = LISTENER address = (ADDRESS = (PROTOCOL = TCP (port = 1522))(HOST=localhost))

  I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below

  HOST = localhost port = 1522

  I think that HOST = localhost and port = 1522 is the cause of the ORA-12560 error because Windows XP was configured in HOST = 192.168.196.101.

  But I do not understand how to solve this problem.

  Can any folk tell me how to solve this problem? must cancel the installation of 8 on step 7 and install it again?

  
  Thank you.

  > The problem is that I am installing Oracle Database 11 g with Windows XP

  Why? above is NOT a supported combination.

  What makes you think that it should work without error?

• Deny access to drive C on the installation of oracle database

  Hello

  Can someone help me, I have installed the Oracle 11 g database on my computer and now I can't access my C drive, and also the Installation was not complete. What should I do to release this drive?

  I moved this thread on the forum of XE. Yet once installed Oracle do not mess with the operating system. PL identify the exact version of the OS - versions supported are documented in the Installation Guide - Oracle & reg; Database Express Edition

  It is best to follow the instructions in the Installation Guide, assuming you have a supported operating system version.

  HTH
  Srini

• HARD drive installation problems

  I have an old Dimension 4600 that recently failed to initialize.  (BSOD appears just after the start screen)  The IDE Diagnostics from Dell (result: failure) indicated that the drive was dead, which was not unexpected - it was the hard original supplied with the system that I've had for 3 years, and I had also been do the BSOD in too many occasions in recent weeks.  The failed drive was the boot drive (master) - the system also has a second IDE HDD (slave) who did pass the diagnostic test.

  I installed a new hard drive and proceeded with the installation of Windows XP.  Installation stops during formatting, with an error message indicating that the installation could not continue and that the HARD drive may be bad.  I have run the Dell Diagnostic and failure of the drive.

  I then pasted the new drive in an other Dimension 4600 (also XP) as the slave drive and it meets the diagnostic test.

  Can anyone shed light on what may be the problem with system #1?

  Thank you all...

  
  

• Oracle 11g installation on Oracle Virtual Box shape [solved]

  Hi friends I want to share my experience in oracle forms and reports on Virtual box installation if this post has already been done by someone, I'm really very sorry to post again. My intention is only to make installation as easy as possible, and for your information, this isn't a full installation of forms in itself, it's just for people who would like to work on a standalone machine.
  
  Software requirements
  
  (1) oracle Virtual Box
  (2) Xp professional edition - 32-bit
  (3) Oracle 11 g Server
  (4) Weblogic server - specific file name I used for the installation is (wls1033_oepe111150_win32)
  (5) portals oracle forms, reports and discoverer - file name (ofm_pfrd_win_11.1.1.2.0_32_disk1_1of1, 2, 3, 4)
  (6) portals oracle, forms, reports and discoverer - file name (ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1) - Patch
  (7) Java 1.6
  
  Steps for installation
  
  (1) install Virtual box on your operating system and make sure u create 2 partitions
  
  c 15 GB and d drive around 10 GB
  allocate 2 GB of ram for the virtual machine
  
  (2) after completing the installation of XP in your area start Virtual installation Oracle 11 gb database that the path for Oracle home or in drive D most of the time oracle Installer chooses D drive if not good to change the D drive.
  
  (3) now install weblogic server keep installing type as typical, and install the application in the end uncheck 'run quick start '.
  
  (4) installation portals Oracle, forms, reports and discoverer - name of file (ofm_pfrd_win_11.1.1.2.0_32_disk1_1of1, 2, 3, 4) - unzip all files four zip and place it in the same folder and the open disk1 and run the installer. during installation choose install only software. Note: Do not try to configure.
  
  (5) once who completed unpack the content of second forms which is the file name (ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1) - unzip the contents to a folder and run the installer it will update all the software generated by your previous installation.
  
  (6) now go to step 5 - this time, while installing choose install and configure, it will create the process required to run forms and reports.
  
  
  Very important note: make sure that your Home of Oracle Directory is "as_1" or else to ensure that that name u give all by performing step 5 and give the name of the same to step 6 and again when you run step 5 _
  
  (7) now all the required tools has been installed now a little tweaking to make it work.
  
  (a) copy the file tnsname.ora from the folder < username > \product\11.2.0\dbhome_1\NETWORK\ADMIN D:\app\ next
  (b) paste it in the folder - C:\Oracle\Middleware\asinst_1\config replace the file.
  
  (8) install the version of Java 1.6 or later
  
  (9) move shortcuts to programs and find the as_inst1 Oracle Instance classic-> Forms Services-> start weblogic server
  
  (10) make shortcuts of programs and find the as_inst1 Oracle Instance classic-> Developer Tools-> Forms Builder
  
  
  You now have your Oracle Forms and reports ready. If something is wrong in the right steps you forgive me (but tested a few times).
  
  Manoj Chakravarthy
  
  Published by: 829958 on January 21, 2011 10:44

  Yes, who knows that I use a day :)

  Thank you very much...

• My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

  My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

  If you have installed the Seagate Software, please delete and see if there is no change.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.