Similar Questions

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• possible bug in Agilent ENA series LabVIEW Plug - and - Play (project-style) Instrument driver

  think I found a bug in this driver and I wanted to get confirmation.  (Here's the link to the driver page, to help locate the driver):
  ( http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=74D1F1D4EB5268E8E04400144FB7D2...)

  The VI in question is public > Action-status > configure > marker Configuration > Configure Marker.vi.

  The question that I saw was that the marker was not be set to the frequency transmitted to the VI.  (The parameter named 'Stimulus'.)  I looked at the guide to the programmer for the Agilent 5071 B and decided that the format of the SCPI command string should probably:

  %.;:Calc%ld:Mark%ld %s;
  : CALC % ld: % ld MARK: X % lf

  The ": X" had disappeared but seems necessary.

  Can this be verified?

  Thank you for taking the time to look at it.

  -Joel

  Snood1,

  I took a glance at the driver and manual of the programmer. It seems to me that the driver behaves as described in the manual should. Configure the Marker.vi use the following string to format the command:

  %.;:CALC%ld:MARK%ld %s;
  :CALC%ld:MARK%ld:X %lf
  

  Is that what you see too? Looks like that's what you added yourself. What was the previous text? This is the text that was there when I downloaded the driver. When it is interpreted, it looks like this

  :CALC1:MARK1 OFF;
  :CALC1:MARK1:X 0.000000
  

  As described in the ENA series Programmer manual, the first turns of the line of the marker reads OFF (page 283). The second line sets the value of the marker 1 (page 295) stimulation.

  Let me know if this looks OK to you.

  Kind regards

• HARD drive external, Toshiba PX1395E, not plug and play in Windows XP

  Hi all

  Thanks for reading this.

  Just bought a number of HDD 2.0 USB 750 GB external PX1395E.
  I want to use to back up files from my old computer to my new computer.
  In fact, my old pc recognizes the HARD drive (plug-and-play) and I already copied the required data.

  BUT: my new computer, with Windows XP Professional, Service pack 3. Does NOT recognize the HARD drive.
  I used several (versions 1.1 and 2.0) USB ports and everything is connected to the way that it should.
  Windows tells me that I have plugged 'something', but is unable to recognize what it is and I can't use the material.

  I think I need a driver to make this work. Site Web de Toshiba does not provide this particular driver (I checked, but it cannot find).

  Is there anyone with a solution?

  Thanks in advance.

  Do you see the HARD drive in the disk management?
  Control Panel-administrative tools-online-online disk management computer management online

  Another way is that reinstall you the chipset driver. Look at the Toshiba site to download and choose the right one.

  Look for yellow exclamation marks Device Manager.

  Let me know, what you're doing.

• A plug-and-play driver convert error

  Hello, I ' m trying to convert the plug-and-play driver that will be used in LabView. In one of the previous where the drivers were the same, is successful, but I have an error.

  http://forums.NI.com/T5/LabVIEW/is-there-a-similar-labVIEW-driver-to-the-one-on-NI-website-for/m-p/8...

  VXIPlug & play Driver for 4395 has: http://www.home.agilent.com/agilent/software.jspx?ckey=2249830&lc=eng&cc=LV&nid=-11143.0.00&id=22498...

  installed in accordance with the recommendations of Agilent.

  Convert by: LabVIEW 8.2 and generator of jamming of LabVIEW for LabWindows/CVI 1.1 instrument Drivers

  Error: During the conversion, everything is going well, but in the end apers Conversion report that no screws cannot be created.

  

  Is the problem in my old version of LabView or somevere else?

  Follow the link... install Agilient IO libraries

  ARRRRGH!

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Problems with the Realtek and Plug-and-Play driver

  Until recently, I noticed a red circle with an X in it by the sound on the taskbar icon. When I switch on it it says no audio device installed and when I go into the Device Manager there is a yellow triangle on my Realtek High Def Audio Driver. When I click on it I get this error:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  The Plug-and-Play driver also seems to give me the same exact error (Code 52) and has the yellow triangle next to him as well.

  Hi Eric,.

  This problem occurred if the driver can be signed or corrupted.

  I suggest you go to the Web to Realtek site, download and install the drivers by selecting the right device.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I don't see my external hard drive under my computer. It works as a plug-and-play on other PCs

  The model number is WD2500ME-01 and it is usually a plug-and-play intstallation

  Hello

  • If it works well before?
  • What were the changes made before the issue occur?
   
  You can check this link:
   
  Advanced troubleshooting tips for General USB for Windows XP problems
   
  http://support.Microsoft.com/kb/310575
   
  You can also check this link:
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• EliteBook 8540p: is the engraver of DVD 595759-001 for Elitebook 8540p plug-and-play

  I have a DVD ROM drive, only in my 8540p here, and I just ordered a DVD (595759-001) burner to replace it with. Just install the hardware? Is this going to be a plug-and-play experience, or I need to find drivers for the replacement? Do I need to uninstall the driver for the original DVD ROM?

  Hello

  The driver for any optical drive is provided by Windows, then you should just connect the new device, but it can sometimes avoid problems by doing this as follows.

  Hold down the Windows key and press R.  In the run box, type devmgmt.msc and press ENTER.  Expand the DVD/CD = ROM readers, made existing right click the device and choose uninstall.

  Once completed, stop the laptop and made the new optical drive.

  When you start Windows, then, give it a few minutes to load completely and you should find the new drive is running.

  Kind regards

  DP - K

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP 32 bit ceased to recognize plug and play devices.

  Recently, I had a virus and had to reinstall windows. After installation, I've updated all the drivers and Windows updates. My mouse, keyboard, monitor, and wireless adapter to work correctly. After about 3 weeks, I went to install my printer. I installed the hardware, but it could not connect to the printer. I followed the instructions of the manufacturer again and again but it never connects. His grateful sound because when I turn on the printer or offshore, I hear 'bing', but it doesn't connect. I used the "New hardware found" Wizard with the disc in the drive and it looks right and research, he never does the program on the disk. I tried to use the camera to Windows and the scanner Wizard with no luck.
  After that I gave up, I tried to use my camera, that has worked well until I reinstalled it and it happens "New hardware found" and the "new hardware detected" appears, but it does not recognize the CD, just look and watch for hours. I got fed up and finally bought a "plug and play" card reader SD and the bubble appears in the toolbar "new hardware found", but then the "new hardware found" stands and asks a disc! Its a PLUG and PLAY! There is no disc! The material is on the device! It's not my USB ports because he DOES not see something trendy and I checked Device Manager and he said his work without no problems found, but it does not connect to it. Does anyone have any info on what this might be? ANY help with this is greatly appreciated! Thank you

  Hi pressure,

  Peripheral Plug n Play need driver for the operation.

  PnP means that you do not have to restart the computer to install something.

  I suggest to update the drivers for the chipset of your motherboard and see if a firmware update is available for your BIOS.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.