OWB installation problem: oracle.ide.ExitNowAllowedException

Similar Questions

• Driver P6 8.3 typical Installation problem Oracle professional

  Hello

  I installed P6 EPPM 8.3 on a machine on top of Oracle database 11 g. Now, I just want to see how professional P6 interface looks like, so I try to P6 typical Installation.

  After selecting "Typical" in the Setup screen, it asks

  1 oracle connection string

  2. username and password (Alias database is read-only, then assign PMDB)

  I have the database with SID orcl running on port 1521, my question is what I would give for the connection string and the user name and password. I have also not meaning to alias PMDB.

  I tried orcl and //machine:1521/orcl in the connection string and in name of user and password I tried PUBUSER (a pattern present in the oracle database) and his password, but this error occurs

  Bad public user name or password. Could not load the DLL OIC: oci.dll.

  Can someone help here?

  Best regards, Prasad

  Hi Prasad,

  the professional customer P6 (PPM or EPPM) first uses the DBExpress in behind. So it works with an Oracle 32-bit client. So, you can choose to use the full client or instant client as mentioned above by yourself.

  So, if using:

  (a) Client (32-bit) oracle

  In a console, make sure that the tnsnames.ora is used. It works easily with tnsping

  If you have the Oracle 11 g DB on the same machine, then the probem is that he's trying to take the oci.dll 64-bit in the database => I will not use the Oracle 32-bit on the same client machine with a 64-bit Oracle install Windows. The reason is that the first condition in the path is taken one I had trouble then with the commissioning of the listener.

  (b) Instant Client

  Unzip the instant client under a path like : \oracle\Instantclient11_2, put the path in front of your Path to environt variable, set a new TNS_Admin environment also variable on the path to instantclient, put your tnsnames.ora and the sqlnet.ora in this folder. Then it should work (check the registry if there is a set of keys TNS_Admin; If Yes, then pull it out of maybe)

  If your database uses also EZConnect then you can also use the connection string in the notation ez / /:/ instead of tnsname.

  Kind regards

  Daniel

• Installation problem Oracle 11 g Linux - HEADSET - EXCEPTION of HOST UNKNOWN

  Hi guys,.
  I have a big problem. I installed the Oracle 11g database in an Oracle Enterprise Linux environment, but I got problems to implement the LISTENER.
  
  All ports were busy, but in the log file, the question is different:
  Taken UnknownHostException: oel64: oel64
  Taken UnknownHostException: oel64: oel64
  
  I use VMware Player.
  
  I tried to put in place the listener in free and open ports, but without success!
  
  Could you please help me?
  [ ]'s

  926757 wrote:

  sb92075 wrote:
  >

  192.168.136.135 is a little different from 192.168.0.1
  Why the difference?

  Rename or delete the listener.ora file (because it is NOT required, then do as below

  lsnrctl start

  The command COPY & results then PASTE all come back here

  -----------------------------------------------------------------------------------------------------

  I think 192.168.0.1 is local IP and 192.168.136.135 internet IP.

  HUH?

  Replace 192.168.0.1 in/etc/hosts 192.168.136.135 & then do as below

  lsnrctl start

• OWB 10 g R2 Installation problem: no component RUNNING server-side

  Hi all
  
  I just finished the installation of R2 OWB10g with no hiccups. I have the following configuration:
  
  Platform: Windows XP Professional v 2002 SP2
  Target instance SID data warehouse: SUMMARY (ORACLE 10 g R2)
  Repository OWB SID: OWBREP (ORACLE 10 g R2)
  two databases on the same server although different drives
  My goal is to have OWBREP be used to design and duration of the deposits
  
  After installation, I used the Repository Wizard to create OWBREPuser and OWBREPowner and can now use the logon user to Design Center - no problem.
  
  But according to the documents, I also need to create a user RUNTIME as well - but for some reason any during the installation, I have not met any such configuration screen. Seems that the installation has only installed on the client side and not the component OWB server-side. Restart the installation through YES goes through the same steps and has no option to install the component on the server side. I downloaded the file from:
  http://www.Oracle.com/technology/software/products/warehouse/index.html
  Oracle Warehouse Builder 10g Release 2 (10.2.0.1) for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T) (809,267,091 bytes)
  
  How can I go about fixing this?

  Hello

  CC Service is in fact a Java process that keeps track of this deployment, execution, etc.
  CC service has details of the OWB repository owner and not the details of target schema details.

  Thank you
  Fati

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• Oracle Database 11 g installation problem: ORA - 12560:TNS: Protocol adapter error.

  People,

  Hello. Initially, my Windows XP host name is 'localhost' and IP 127.0.0.1.

  I installed Oracle Database 11 g with Windows XP successfully and all customers in the database with the database instance running.

  For some reason, I uninstalled all of the database server and remove the whole installation directory /oracle.

  I have configured the address IP of Windows XP in 192.168.196.101 to ping other machines.

  For my needs, I installed Oracle Database 11 g with Windows XP again. During step 7 of 8: Oracle Database Configuration Assistant, I got this error:

  ORA - 12560:TNS: Protocol adapter error.

  I click on the button "Password management", there is no line in this window (no user name, no account of the lock).

  I have check the listener as below:

  C:\ > lsnrctl
  LSNRCTL > start
  His output: earphone HEADSET name has already been started.
  LSNRCTL > status
  Its release:... Service DB1 has 1 instance. The instance BD1 ready state. The command completed successfully.

  I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is:

  Listen [0] = LISTENER address = (ADDRESS = (PROTOCOL = TCP (port = 1522))(HOST=localhost))

  I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below

  HOST = localhost port = 1522

  I think that HOST = localhost and port = 1522 is the cause of the ORA-12560 error because Windows XP was configured in HOST = 192.168.196.101.

  But I do not understand how to solve this problem.

  Can any folk tell me how to solve this problem? must cancel the installation of 8 on step 7 and install it again?

  
  Thank you.

  > The problem is that I am installing Oracle Database 11 g with Windows XP

  Why? above is NOT a supported combination.

  What makes you think that it should work without error?

• Installation of Oracle Database 11 g (11.1.0.6) on Redhat Linux (4.1.2 - 14) machine

  Hi all
  
  I've been struggling with the installation of Oracle 11 g (11.1.0.6) database on Redhat Linux (4.1.2 - 14) for the last 2 days. The area most struggle is to install required on a Linux RPM packages. I'm really running out of ideas to install by downloading the RPMs right on the internet.
  
  Somehow, I managed to installed most of them but could not download and install below good packets under Linux.
  
  Looking for the gcc - 4.1.1. Not been found.     Failure of < < < <
  Checking for libaio-devel - 0.3.106; Not been found.     Failure of < < < <
  Check libstdc+-devel - 4.1.1. Not been found.     Failure of < < < < +.
  Looking for elfutils-libelf-devel-0, 125; Not been found.     Failure of < < < <
  Check glibc-devel - 2.5 - i386. Not been found.     Failure of < < < <
  Check glibc-devel - 2.5 - x86_64; Not been found.     Failure of < < < <
  Verification of the gcc-c+-4.1.1; Not been found.     Failure of < < < < +.
  Verification of compat-libstdc+ -33 - 3.2.3 - x86_64; Not been found.     Failure of < < < < +.
  
  * the above information was collected on the wizard checked for system configuration requirements.
  
  And also, I got error in the log Wizard Setup below information.
  
  Checking available swap space requirements...
  Expected result: 7980 MB
  Actual result: 1983MB
  Full version. The result of this review is: failure of < < < <
  Problem: The system doesn't have the required swap space.
  Recommendation: Make more available swap space to perform the installation.
  
  But, my machine is the high range (hard disk 1 to and 8 GB of RAM) and here is the configuration.
  
  [+[root@dbserver2 ~] # df h +.
  Size of filesystem used Avail use % mounted on
  + / dev/map/VolGroup00-LogVol00 +.
  + 899 G 14G 839G 2% / +.
  + / dev/hda3 92M 12 M 75 M 14% boot +.
  tmpfs G 3.9 3.9 G 0 0% / dev/shm
  + [root@IN-GMS19 ~] #+.
  
  Can someone advise me where and how can I download the appropriate RPM packages and how do I swap space requirement as mentioned above resolution failure. Please let me know if other required information.
  
  Kind regards
  Kumar

  Salvation;

  Can someone advise me where and how can I download the appropriate RPM packages and how do I swap space requirement as mentioned above resolution failure. Please let me know if other required information.

  You can find all the RPM related to your DVD. See thread for the RPM below:

  Confirmation of RPM
  Re: Install package for oracle11gr2

  For swap:
  Swap size increase-linux
  How to increase the size of swap?

  Respect of
  HELIOS

• Error during installation of Oracle Identity Manager

  Hello
  I'm having a problem when trying to install Oracle Identity Manager. I'm trying it now for two days and it's always the same problem.
  
  I have read this thread:
  Oracle Identity Manager Server installation problem (but still have no idea what to do).
  
  I'm installing in a virtual lab environment (Windows Server 2008 on VMware).
  This is a new installation.
  
  Installation scenario:_
  * 1.* Oracle Database 10g (10.2.0.3)
  * 2 Suite DBA of Toad for Oracle
  * 3.* Oracle Weblogic Server 11g R1
  * 4 Oracle Identity Manager v9.1.0.1
  
  * 5.*
  Then I create a new instance of database Oracle for Oracle Identity Manager as described here:
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 6.*
  Then I prepare the DB for Oracle Identity Manager by running:
  prepare_xl_db.bat C:\Oracle\product\10.2.0\db_1 xelsysadm xeltbs C:\Oracle\product\10.2.0\oradata xeltbs_01 TEMP password123 password123 XAVIER
  
  as described here (preparation of the database under Windows):
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 7.*
  I get no error after you run the script is finished
  
  * 8.*
  Then I run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
  
  * 9.*
  I'll take the steps and after the installation of the error pop ups next:
  
  Following error occurred during the creation of connected scheme*.
  Error occurred while loading database script*.
  +...\Oracle identity Manager v9.1.0.1\OIM9101\installServer\Xellerate/db/oracle/xell.sql+
  Contact your DBAORA-06550: line 1, column 7: PLS-00905: object SYSTEM. PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: statement ignored [07/10/09 12:18]*.
  
  * 10.*
  Then I click Next and this message pop ups:
  
  Install oracle Identity Manager found that SetDBKey.bat failed. *
  
  * 11
  Then the installation ends / dropouts
  
  
  Does anyone have an idea what is talking about this error and how to get around?
  I would be really appreciated. I'm getting desperate, because I don't know what I'm doing wrong. I thank very you much in advance!

  Make sure that the IOM database schema is created.

  This error is usually tied when the user 'SYSTEM' is used as a schema of the IOM. IOM does not account for database support as its schema SYSTEM.

  After executing the prepare_db.sh, connect to the database using schema IOM to itself, if you have connectivity.

• HDD with Win 7 clean installation problem

  Hello everyone,

  I have a new FreeDos Y560 and impossible to install Win7. It shows all partitions in the menu Setup, but for everyone, says that windows cannot be installed. He tells me that they cannot be formatted ntfs (which is false) and also check the controller in the bios. I switched from ahci to ide mode and have the same problem.

  Windows xp starts installation (only in ide mode), but stops at 7% during the installation the data.cab, I think maybe that's the same problem and it can not just write data to the hard drive.

  the freedos, which has been pre-installed no longer works (worked the first time). When I boot without the cd boot, I get a PXE - E61: Media test failure, check cable.

  do you think that the hard drive is just damaged?

  I can run ubuntu on cd, and did a small check it seems to be ok. but when I install ubuntu, after the restart, he went and I have to install it again (and again and again?)

  PXE - e61: possible hard drive error or a connector.

  Contact lenovo helpline for replacement free of charge if you have the warranty.

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• PSC 2410 installation problem

  any ideas on how to solve the PSC 2410.unable installation problem install psc 2410 due to failure to the requirements of the system administrator. I am only one user on Windows Vista PC

  I'm sorry you have a problem with the installation of the printer.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c00808543

  Let me know what happens.

  You can also restart the computer.

• Win 7 64 bit installation problem

  Hi, okay so I have a dell inspiron with windows vista 32 bit and I am trying to install windows 7 64 bit, I followed all the instructions and everything works fine until it gets to finish install, after the first reset itstarts completing installation and then I get a blue screen with the 0x000007e error code. I tried to remove ram and installation with only 2 GB, I downloaded a new startup of windows 7 on a flash drive to see if the drive has been courrpt but I got the same error, I also tried to projecting my drive hard and still no luck. Any ideas?

  Thanks in advance,

  Nathan

  Hello

  Check the BIOS settings and change the SATA AHCI option and check. Consult the computer manual or contact their support site.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can read these articles and check if it helps:

   

  Windows 7 installation problem: hard drive not found

  http://Windows.Microsoft.com/is-is/Windows7/Windows-7-installation-problem-hard-drive-not-found

   

  Windows 7 installation problems: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problems-frequently-asked-questions

  You can also check this thread that resembles the similar issue that you are facing:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/0x0000007E-during-installation-of-Windows-7-Pro/65d83a65-5173-4b60-97F5-ff3e2e315b90

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Installation of Oracle 11 g Release 2 forms and reports

  Hi all

  I have a problem during the installation of Oracle forms11g Release 2.

  

  In fact this is my version of WebLogic Server 11g weblogic (10.3.6) which is recommended by Oracle for Oracle forms11g Release 2

  My system is running on 64-bit...

  Someone kindly suggest me how can I proceed.

  Thanks and greetings

  Shiva

  Hey Shiva,

  check the 64-bit version for all components on Win7 64 ? :

  • Install and set up the loopback adapter
  • Check the PATH entries (dir/X)
  • WLS:
    • 1.7.0_71 64-bit JDK
    • the JAVA_HOME=C:\Java\JDK1.7.0_71 value for system
    • Install WLS 10.3.6 generic 64-bit
    • Check THAT WLS startup http://localhost:7001 / console
    • Shutdown WLS
  • 11 GR 2 forms FM & reports: 64-bit:
    • Step 1 installation (not set)
    • Step 2 set up
  • Install Java 1.8._51 incl. plugins for IE11 and FireFox.

  Hope this helps,

  Friedhold

• Installation problem: IMSLib not found.  Services of Acrobat will not work.

  Hello

  Have a new widows 10 Office pro with SSD climb like drive c: with OS and set for the D: drive to the default installation for all programs.

  With Adobe Creative cloud, I tried to download the desired programs, but after many problems and failures, I gave up and I contacted Adobe.

  I have been informed, if you sell products Adobe CC user must be the default C: drive.  They then gently took more than an hour on a remote PC link to define the system as you wish for them

  Finally, we have programs to download

  Problem is Adobe Acrobat DC after launching the program I get the message ' installation problem: IMSLib not found.»  Services of Acrobat will not work. »

  Anyone has any idea why and what I can do about this situation - because I consider the abandonment of the CC and revert to the version of CS

  Adobe, you make this so difficult why not let users decide where to install programs on the machines out there

  Installation problem: IMSLIB not found.  Services of Acrobat will not work.