Driver power state failure - cannot determine the issue with the driver

Similar Questions

• Driver vista Power State failure Blue Screen of Death

  Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY

  Hello

  Those showed all CAUSE as a Windows component that means something different it led into error.
  Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
  to analyze the other.

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Qosmio X 870 - 14 d driver Power State failure Win 8.1

  Well I try almost everything as uninstall the driver to install from the Nvidia site manually, but it may not help.

  When I start to play game screen 30 sec later blacker than blue showin screen upwards and it says "Driver Power State failure" after that reboot my laptop and when BOOM opening! I can't see the icon of the Nvidia graphics driver on my toolbar and Im open Device Manager, then click on graphics cards I have only seen Intel(r) HD Graphics 4000 but no idea about the GTX 670 M.

  I also have the Geforce experience opening but he says "sorry, GeForce experience could not find a driver for this PC. Help, please.

  someone here? help pls

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• Driver Power State failure win 8 ativ 500 t

  Driver Power State failure win 8 ativ 500 t.

  also had this error after a reboot after microsoft updates.
  Here is my landfill.
  https://SkyDrive.live.com/redir?RESID=B8DCDEC64FBC0776! 9501 & authkey =! AK7ABb4NcCUakaU

  Moved from windows to the surface.

  Greetings PolishMario,

  Please check with Samsung as they are making the Ativ. I pulled their support for you link here:
  http://www.Samsung.com/us/support/owners/product/XE500T1C-A01US

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• 500 cannot determine the Package Id

  I exported my project of cascade in BlackBerry 10.0.9 beta3 SDK. "" It's OK when I install and run on my alpha dev, but when others install my sidebar file with DDPBinstaller, error "500 cannot determine the Package Id" occurs

  My package ID is like 'com.example.TestGPS '.

  How to solve this problem?

  I found the cause: bar file corrupted during the transfer of network...

• 12.2.4 creating a requisition internal error (error of calculation of the tax: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction).

  Hi all

  I have created a new configuration of client and location. Now try to create IR and get below error.

  ----------------

  Error: The tax calculation: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator.

  --------------------

  I've made a few changes by looking at Doc-ID 1385936.1 and community discussions.

  Ran "Name geography program SEO" and the journal looks very good. No registration rejected.

  +---------------------------------------------------------------------------+

  From simultaneous program ' geo referencing worker name: 1'

  Start 08/07/15 07:44:56

  Treatment for the Table: HZ_LOCATIONS and run Type: ALL

  Parameters: Country Code: U.S.

  Use code: all THE

  Location Id: NULL: location Id: null

  Start date: NULL: End Date: NULL

  Number of workers: 1

  Total number of records of location of treaties: 7319

  Number of records managed: 7319

  Number of rejected records: 0

  Name of georeferencing process completed successfully

  +---------------------------------------------------------------------------+

  But still, I get the same error during the creation of IR

  Someone help me please by looking in the uploaded screenshots. Incase if any additional necessary information, pls let me know.

  This is related planning tests for this customer, I don't know about this part of the tax.

  Any help is really appreciated. Thanks in advance.

  Akshay

  PS: This is not the sensitive customer data.

  Hello Akshay,

  Can you please follow the note Transaction Workbench error: System cannot determine your location for information
  This location and cannot derive from a tax jurisdiction (Doc ID 438718.1) and see if that helps

• OF DRIVER POWER STATE FAILURE

  Hello

  Seen a lot of posts on this but nothing I found to help me.  I get an error in the failure State on Windows 7 64 driver when the computer goes into mode "Eve".  Instead of waking up the computer is off and when I restart I get an error saying that windows is not stopped correctly and he asks me if I want to start in safe mode.

  I need to find the device / driver that is the cause.  I downloaded my minidump files in the following location:

  https://www.dropbox.com/s/w03xb8svk335pg7/minidump.zip?DL=0

  Hoping someone can help on this issue and I would like to know if there is something usable in it.

  Thanks in advance!

  PS:

  I also had a utility called whocrashed, he read the dump file and told me the following...

  Thursday, April 23, 2015 3:03:54 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\MEMORY. DMP
  Uptime: 1 day, 11:40:39
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8009AC6A10, 0xFFFFF80005A5E518, 0xFFFFFA800CE613B0)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thursday, April 23, 2015 3:03:54 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\042315-19796-01.dmp
  Uptime: 1 day, 11:40:39
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8009AC6A10, 0xFFFFF80005A5E518, 0xFFFFFA800CE613B0)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  CM

  This phenomenon was linked to Rt64win7.sys 8101E/8168/8169 NDIS 6.2 64-bit driver Realtek Corporation.  I remove the current driver and install the latest driver available.

• Driver power state failure Acer V3 571 G

  Hello!

  I use my Acer V3 for more than six months, and recently my computer started to plant several times gives me error: State failure driver. I read it's an incompatible driver in the cause, but I'm not sure. Sometimes when I watch YouTube videos, 360 p (my internet is slow). The video stops and then the cursor stops responding while the sound of the video continues. Shortly after, I find myself on a BSOD. How can I fix?

  What is your GPU and what version of your drivers. If you have updated your drivers when it started to happen probably you need to get them off.

  https://forums.GeForce.com/default/topic/389688/GeForce-drivers/NVIDIA-statement-on-TDR-errors-Displ...

  Check this too this is probably the problem with gpu drivers.

• BSOD, driver power state failure

  I'm having a recurring problem with a laptop of mine where I get about 50 or if BSOD errors in a 24 hour period. They are all related to the driver ntoskrnl.exe (ntoskrnl.exe + 75bc0). This issue does not seem to get everything working in Mode safe.

  I've seen some posts regarding this, but I have not seen any allusion to the ntoskrnl.exe + 75bc0

  System details:

  OS Windows 7 Ultimate SP1 build 7601

  Model Toshiba Tecra M9

  Any advice on how to solve this problem would be appreciated.

  Johnathan

  It seems that you have 2 problems.  The vast majority of these accidents was related to your vgapgp.sys driver that s used for your monitor.  I re-install the driver completely and run a file system check

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  The other problem is related to netw5v64.sys Wireless WiFi Link Driver of Intel Corporation.  Yet once completely remove the current driver and install the latest driver available.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  0: kd >! devobj fffffa8001871460
  Object Device (fffffa8001871460) is:
  Can not read information from nt shift! ObpInfoMaskToOffset
  \Driver\vga DriverObject fffffa8002a8bbb0
  Current PRI 00000000 RefCount 0 Type 0000001c Flags 00003044
  DevExt fffffa80018715b0 DevObjExt fffffa8001871680 DevNode fffffa8004737d90
  ExtensionFlags (0000000000)
  Features (0x00000100) FILE_DEVICE_SECURE_OPEN
  AttachedDevice (top) fffffa80018782e0 \Driver\monitor
  Queue is not busy.
  0: kd >! devstack fffffa8001871460
  ! DevObj! DrvObj! DevExt ObjectName
  fffffa80018782e0 \Driver\monitor fffffa80045edb70 InfoMask field not found for _OBJECT_HEADER to fffffa80018782b0

  > fffffa8001871460 \Driver\vga fffffa80018715b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset

  ! DevNode fffffa8004737d90:
    DeviceInst is 'DISPLAY\Default_Monitor\5 & 275C 28 & 0 & 12345678 & 01 & 00 '.
  ServiceName is "monitor".
  0: kd >! drvobj fffffa8002a8bbb0 f
  fffff80002a3c1d0: failed to get the value of ObpRootDirectoryObject
  fffff80002a3c1d0: failed to get the value of ObpRootDirectoryObject
  Driver (fffffa8002a8bbb0) is intended to:

• Driver power state failure BSOD in Windows 7 Professional (64 bit)

  The dump for this stop file is on OneDrive at: https://onedrive.live.com/redir?resid=26431A6C4389BE38%21525.

  It is the third time I've encountered this problem on this computer, an HP Omni 200, Intel Core I3, 6 GB ram 64 bit.

  I would appreciate help with this problem.

  Which works perfectly, thanks!

  The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  If we run one! IRP on the 4th parameter of the bug check (IRP address blocked), we get the following:

  > [16, 2] e1 0 fffffa800bf68260 fffff80002c63710-fffffa800c0de240 00000000 success error cancel pending
  \Driver\USBAAPL64 nt! IopUnloadSafeCompletion

  ^^ usbaapl64.sys = device driver Mobile USB Apple iPod/iPhone.

  Look for an update - http://www.apple.com/downloads/

  If this is not available, I would recommend uninstalling the software + disconnect and reconnect does not your iPod or iPhone for a few days. If accident stops, that's the problem.

  Kind regards

  Patrick

• Stop 9F driver power state failure

  I get frequently STOP 9F bugs after my system has been running for some time and I try to put it to sleep or put into hibernation.

  This is the analysis of error checking:

  Can anyone help with this?

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  Arg2: fffffa80048ec060, physical device from the stack object
  Arg3: fffff800045fd518, functional device object of the stack
  Arg4: fffffa80043815f0, blocked IRP

  Debugging information:
  ------------------

  DRVPOWERSTATE_SUBCODE: 3

  Nom_image: pci.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc117

  MODULE_NAME: pci

  FAULTING_MODULE: fffff88000f78000 pci

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  Nom_processus: System

  CURRENT_IRQL: 2

  STACK_TEXT:
  fffff800 '045fd4c8 fffff800' 030f6e23: 00000000' 0000009f 00000000 00000003' fffffa80 '048ec060 fffff800' 045fd518: nt! KeBugCheckEx
  fffff800 '045fd4d0 fffff800' 03093fa6: fffff800 '045fd618 fffff800' 045fd618 00000000'00000007 00000000'00000000: nt! : FNODOBFM: 'chain' + 0 x 29330
  fffff800'045fd570 fffff800'03093326: fffffa80 '0959f168 fffffa80' 0959f168 00000000'00000000 00000000'00000000: nt! KiProcessTimerDpcTable + 0 x 66
  fffff800 '045fd5e0 fffff800' 03093e7e: 000000b 9'fff258c5 fffff800 '045fdc58 00000000' 004e2373 fffff800' 032040e8: nt! KiProcessExpiredTimerList + 0xc6
  fffff800'045fdc30 fffff800'03093697: 00000030' 510838ce 00000030' 004e2373 00000030'510838 d 4 00000000'00000073: nt! KiTimerExpiration + 0x1be
  fffff800 '045fdcd0 fffff800' 030906fa: fffff800 '03200e80 fffff800' 0320ec40 00000000 00000001' fffff880' 00000000: nt! KiRetireDpcList + 0 x 277
  fffff800'045fdd80 00000000' 00000000: fffff800'045fe000 fffff800 '045f8000 fffff800' 045fdd40 00000000' 00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0x9F_3_NETw5s64_IMAGE_pci.sys

  BUCKET_ID: X64_0x9F_3_NETw5s64_IMAGE_pci.sys

  Follow-up: MachineOwner
  ---------

  I've identified the problem, but have unfortunately no solution. The problem is indeed the dirver NETw5s64.sys.

  See--> http://communities.intel.com/thread/10055 for additonal discussion of the problem that intel must update this driver.

  If I connect with a wired connection, everything works as it should. I put the system to sleep and wake up as it should work. However, if I connect using wireless, after using it for some time, the computer will not sleep. The screen is blank, the disk activity continues for some time and finally the system come to STOP 9F.

  This and other aging with this driver and discussed in the above link!

• Windows Driver power state failure ntoskrnl.exe bluescreen pro 8.1

  Hello!

  In recent weeks, I have a problem with my computer laptop vaio. At random times, I get a blue screen. The last 3 dmp files are here http://1drv.ms/1rVI4al.

  I run SFC/scannow, but he found no violations of integrity

  Thanks for the help!

  Hello

  All attached files of the DMP are the bug check DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  9F error checking, {3, ffffe000170fe2a0, fffff8008a507c80, ffffe000116f6bd0}

  If we run one! Check irp on the 4th parameter of the bug, we get the following:

  > [16, 2] e1 0 ffffe00016f5f030 fffff800889a82d8-ffffe00018c84f00 00000000 success error cancel pending
  Failed to load image \SystemRoot\system32\DRIVERS\btfilter.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for btfilter.sys
  ERROR: Module load completed but symbols can be loaded for btfilter.sys
  \Driver\BtFilter nt! PopRequestCompletion

  btfilter.sys is the Atheros Bluetooth driver.

  Update your drivers Atheros BLuetooth via the site of Sony ASAP - http://esupport.sony.com/perl/select-system.pl?DIRECTOR=DRIVER

  Kind regards

  Patrick

• Reference Dell vostro 7110 that cannot determine the type of adapter power ac

  When I put my charger it says could not determine the type of ac that the battery was at 0% for a while but the other day I noticed that it was fully charged so that the charger must have worked for a bit but its wrong now again all the ideas it might be?

  Hello

  I suggest you follow these methods and check.

  Method 1:  Unplug the AC adapter and the battery from the computer and then press on and press and hold the power button for 10-15 seconds and then release the power button, plug in the AC adapter and the battery and then try to start the computer and check if you get the error message even if you get always the second error message try stage.

  Method 2:  Try to update the computer BIOS, please visit this link.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  Download the latest version of the BIOS, BIOS, download and run (installation) BIOS, restart the computer and check if you get the same error message or not

  I also suggest you to check with Dell. Use this link. http://en.community.Dell.com/support-forums/laptop/default.aspx

  I hope this helps!