Driver problem Windows 10 LAN ASPIRE 5750 G

Similar Questions

• Driver problems Windows 7 HP 15-f039wm

  After decommissioning of my HP 15-f039wm Notebook PC from Windows 8 pre-installed

  .1 to Windows 7 I have common driver problems.

  I tried the solutions already widely open to the public for similar problems, so far without success.

  Fortunately, I found a working LAN driver. Which remain missing are the drivers for the following devices, especially USB driver:

  PCI encryption/decryption controller:

  PCI/VEN_8086 & DEV_OF80 & SUBSYS_21DE103C & REV_0E

  PCI/VEN_8086 & DEV_OF80 & SUBSYS_21DE103C

  PCI/VEN_8086 & DEV_F18 & CC_108000

  PCI/VEN_8086 & DEV_F18 & CC_1080

  SM Bus controller:

  PCI/VEN_8086 & DEV_OF12 & SUBSYS_21DE103C & REV_0E

  PCI/VEN_8086 & DEV_OF12 & SUBSYS_21DE103C

  PCI/VEN_8086 & DEV_OF12 & CC_0C0500

  PCI/VEN_8086 & DEV_OF12 & CC_0C05

  (USB) Universal Serial Bus controller:

  PCI/VEN_8086 & DEV_OF35 & SUBSYS_21DE103C & REV_0E

  PCI/VEN_8086 & DEV_OF35 & SUBSYS_21DE103C

  PCI/VEN_8086 & DEV_OF35 & CC_0C0330

  PCI/VEN_8086 & DEV_OF35 & CC_0C03

  Unknown device:

  ACPI/INT 3396

  * INT 3396

  Unknown device:

  ACPI/INT 33BD

  * INT 33BD

  Any assistance in finding the right drivers for the above devices would be greatly appreciated.

  Hello:

  Here are links to the drivers you need... including the graphics...

  First install the Intel chipset driver and reboot (smbus controller).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng

  Then, install the graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714&lang=eng

  PCI encryption/decryption controller:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23677&lang=eng

  USB3:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23734

  Unknown ACPI/INT 33BD

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_132782_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI/INT 3396... that I don't know...

• XP remote hard drive problem - Windows 7.

  I have a 500 GB external hard drive (Seagate expansion Portable Drive) my father format & loaded but when I tried to access it told me that I had to format. Then I formatted it & he wiped the data but now they can access it. He's got windows7 I have xp, what is our problem?

  Hi ArnoldRendell,

  ·         You get the error message?

  ·         Are you able to access the external hard drive in Windows XP?

  Follow these methods.

  Method 1: Performs a search on the external hard drive using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  How to analyze and defragment a Windows XP disk

  http://support.Microsoft.com/kb/305781

• Problem with sound when Aspire 5750 G connected via HDMI

  Hello

  I'm having a problem connecting my Aspire 5750 G to my TV through my HDMI cable. Previously, I've always been able to go in manage Audio devices to choose the HDMI option, but today this option disappeared. Nothing has changed with my TV or my cable and all my video and audio drivers are up to date. Is there another way to solve this problem?

  India

  Hello

  Check if the HDMI Audio is listed in Control Panel.

  Click Start ==> Panel ==> Sound ==> Playbacktab Select. If HDMI Audio is listed here, make sure that the green check mark is listed. If not, just click on any space and select show disabled or disconnected devices. Then right-click on the HDMI Audio and select as a default device.

  Thank you best regards n

  Rakesh

• FCA202 7 - driver problems - Windows 64-bit operating system!

  I had this FCA202 interface today and im having a LOT of trouble of implementation... I got the internet 1.3 update, but it says it's for 32-bit operating systems... and ive tried everything looks... I can't install the drivers! Help!

  Hi Mike,.

  For assistance, please provide brand and full model number.

  We need to check if your device is compatible with Windows 7.  See the Windows 7 Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=FCA202

  You can follow the steps mentioned in the link below

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please contact the manufacturer of your device for known problems.

• Driver problem Windows 7

  Out the installed hard drive IDE (with Windows 8.1) HP Pavilion 15 laptop-e72sa and replaced by a disc SSD Crucial, then installed Windows 7 but cannot get an internet connection. There are yellow warning markers in Manager devices next to the network adapter and the Ethernet controller. The notebook has a Realtek RTL8188EE 802.11bgn Wifi adapter for which I can only find a driver for Windows 8. I tried and I tried to find an appropriate version of driver Windows 7

  Nothing helps. I would appreciate all the advice really.

  Hello:

  You can use this driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124515_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Bootcamp day graphics driver problem "windows 10.

  On my Mac Pro 2013 (with 2015 D700 AMD graphics cards), Bootcamp (10 Windows up-to-date) running, I have problems with the update of the graphics driver this week Bootcamp.

  More precisely:

  * For reading "Star Wars: Battlefront" EA:

  * The game freezes sometimes when she used to never do.

  * Some non-action screens (for example, the dashboard after game) flicker badly.

  * Even after restart again once, graphic poster Apple software update program driver updates that I just installed successfully to be not yet installed.

  I hope that this problem is corrected, because I would like to unlock the power of the D700s dual AMD in this machine.   No foolin'

  Have you created a Windows system restore point before the upgrade? If so, restore and ignore the update until you get an updated version.

• 4 TB HARD drive in windows 7 with Aspire M1641?

  I installed Windows 7 on my Aspire M1641 and want to use a 4 TB HARD drive.
  How to handle that? I put it as a GPT disk, but it recognizes the disc as GB 1678.

  IronFly wrote:

  It uses NVIDIA GeForce 7050 / nForce 620i and it will be very difficult to find new drivers, since it is a very old chipset and not well supported NVIDIA.

  for windows 7 x 64, this is the last available:

  http://www.nvidia.com/download/driverResults.aspx/57492/en-us

  Unfortunately, this does not work, but finally I found the driver for the SATA controller and then everything worked. It is: NVIDIA nForce Serial ATA Controller 10.6.0.319 who finally did the job.

  Thanks everyone for trying to help!

• Hard drive problems Windows Vista Ultimate Edition

  Well guys, that it left me speechless.  I recently inherited a laptop from a friend who is fairly new and in good condition.  The laptop, a Toshiba Techra A9, installed Windows Vista Ultimate.  The problem that I seem to have with the laptop is that it will start Windows in normal mode but gets up to a certain point and then hangs up.  I can hear the drive trying to be rolled up and continues to make a rattling noise, similar to a folder that jumps.  The funny thing is that I can turn the machine off and restart in SafeMode w / networking with no problems.  I tried a hard drive cool to think the problem could be a faulty drive, however, the new drive does the same thing.  I installed Vista via the Toshiba Recovery CD, and from the beginning for the first time Windows has frozen, the new hard drive making the same noise as the old.  Anyone out there have any ideas why this is happening?  Install a new hard drive and having the same problem son believe me that it is related Windows or I'll have another hardware problem elsewhere on the machine.  Thank you!!

  Try to check the drivers on the computer to the hard drive. If you can, go to the MMC Console in computer management, go to the Device Manager, and then in the console tree, you should see a line of 'hard drives. Down there, you should be able to see your hard drive. Right-click and click Properties, then go to the drivers of the popup window and note the driver version number. Check on the Toshiba site and see if there are updates to the hard disk driver. If there is, then install it. In addition, you can start safe mode and run your antivirus, assuming that he himself has not been compromised. It seems to be a software problem or driver since you say that you can start safe mode. Timothy

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Belkin F5D7050 driver problem - Windows 8 Pro

  Hello

  I installed Windows 8 Pro yesterday, I upgraded to Windows 7.

  However, the drivers and compatibility with my Belkin F5D7050 does not work in my operating system upgraded.

  I saw someone post a question on a Web site on the fact that it worked on the preview and not now because you have changed something between the preview and the release. I can't be certain if.

  However ended last night, I managed to uninstall the current driver that is used and then reinstall it from the disk provided with the product.

  Then, I turned on my PC this morning to test the new OS, tried to do the same thing as what precedes, and it's not even plug in or allowing me to remove it from the Device Manager.

  Can you please advise and resolve this issue with me ASAP

  Thank you very much

  Nick Smith

  On the right, Hello all suffering from this problem.

  Here is how we solved the problem.

  Put the installation disc in your PC.

  If you do not have the disc download drivers how you feel are correct.

  Right-click on the installation application, select the Compatibility tab.

  Click on run compatibility troubleshooting, waiting for that it ends...

  Click on troubleshoot program, and then click this program, worked on older versions under Windows but won't install or run now.

  Then select the Windows 7.

  Go there and that definitely solved the problem of their.

  If you have any questions you can contact me here, or @ * address email is removed from the privacy *

  Thank you

  Nick

• RALink Bluetooth PCIe Adapter has a driver problem Windows 8.1 - code 39

  RALink Bluetooth PCIe Adapter has a bus PCI driver 2 problem. device 0. function 1 Windows cannot load the driver for this hardware device. the driver may be corrupted or missing (code 39)
  Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  HP ENVY desktop PC 700-050
  Serial number: MXX32503WL
  Product number: H5P83AA

  Hello

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.

  Follow the steps under Code 39 of this Microsoft article:

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Uninstall and reinstall the network driver to recreate a link from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5368252#N614

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Driver problem Windows 8 App update

  Windows 8

  8 apps that will be not updated
  the said problems 3 drivers are the problem, but it can't be fixed. 1 WAN miniport driver for network monitor. 2 pilot IP 3. The IPv6 driver
  M/s wants $99 to fix.
  I, ve been using since last January.
  Thanks for any help

  Hi Richard,

  You start the computer in Normal mode after completing the clean boot?

  If you started the computer to Normal Mode after you Clean boot, and then the App updates are not displayed, then it means that the updates were installed successfully.

  If the application updates are available, they reflect in store Windows.

  Date of arrival:

  Discover apps in the Windows store

  Hope the helps of information provided. Get back to us if you have questions more associated with Windows.

• OfficeJet Pro 8610: OfficeJet Pro 8610 - driver problem Windows 10

  I'm having a problem with this printer.  I installed and removed a bunch of times and it won't work.

  Plrinter's talk, I can navigate to in a browser web, I replaced the cable network and power cycling the routers, firewall is turned off.   Something is not woking with the installation of the driver?  I have remove the device, and then download the software/driver from HP and it doesn't fix it?

  

  Hello again Kavitz,

  I suggest you contact HP Total Care.  A representative from HP will be able to help you in real time so that you get the problem solved now affixes to the waiting for a response on the Forums.  A representative from HP will also have the possibility to use remote assistance if you decide to follow this path.

  Please click on the link that I provided in my previous post on how to contact HP directly.

  Thank you once again for your time.

  See you soon,.

• Driver problems Windows 8.1

  I have a laptop HP Pavillion 2235TX G6 and have upgraded to windows windows 8.1 8.

  After this update, I noticed in playing games the screen flash and have been unplayable.

  I went to download it driver HP and selected.

  Updates

  Scan your system for missing or out-of-date drivers and software.

  It comes up with the following.

  Hello

  For your particular type switchable Graphics (Intel/AMD) the two gpu drivers are installed by the package of software AMD - driver Intel separate on your product page is for other machines in your range that only have an Intel gpu.

  Looks like you already have the correct drivers installed to DOWNLOAD here.

  Another way to check is to open Device Manager, expand display adapters, and then right-click and select properties - you should see like AMD Intel and AMD driver manufacturer graphics devices.

  Kind regards

  DP - K