Microsoft XNA Framework Redistributable 3.1 Error 2908

Similar Questions

• Cannot install Microsoft XNA Framework Redistributable 3.1.

  This is my first post so im sorry if I don't give many details about my problem.

  Im trying to install Microsoft XNA Framework Redistributable 3.1, but whenever I open it I get a pop-up message saying "Microsoft XNA Framework Redistributable 3.1 requires at least .NET Framework 2.0", but that's not true, I have the .NET Framework 3.5 sp1 installed. Then I uninstalled then re-installed and then tried to install XNA 3.1 switched off, but she appeared again.
  I searched many sites to help until I posted it and nobody seems to have my specific problem, im full of ideas, I ran each repair tool of the .NET framework from the Microsoft site and it does not work please someone help me with my problem.
  Im running windows vista 32 bit.

  I finally solved my problem, it seems that some things from registry were missing for .net 2.0, I discovered because I fell recently an advisor to upgrade to windows 7 and it installed .net 2.0 for me without fail. I hope that if anyone else has this problem, they can do what I did. Cheers!

• Microsoft xna framework 4.0 error 2908

  When I tried to install microsoft XNA Framework 4.0 error 2908

  He 2 error to give:

  Setup has encountered an unexpected error installing this package.

  This may indicate a problem with this package.

  The error code is 2908.

  second error:

  "An error occurred during the installation of assembly ' Microsoft.Xna.Framework, fileVersion ="4.0.20823.0", version =" "4.0.0.00000", "neutral" = culture, publicKeyToken =

  "842CF8BE1DE50553," processorArchitecture = "x 86". See Help and Support for more information. ' HRESULT: 0X8002802F ".

  IM runing WindowsXP

  I had .NET Framework 4.0 installed and I had put windows up-to-date.

  Help, please

  Hello

  You can refer the link below for similar question thread, check if it is useful, and for more information, you can post your request in the below mentioned forum.

  http://forums.create.msdn.com/forums/p/68824/420097.aspx#420097

  XNA Framework

  http://forums.create.msdn.com/forums/56.aspx

• Problems to install XNA Framework: error code 2908

  When you try to install XNA Framework v4.0 via xnafx40_redist (an automatic installer for an application of steam), after you initialize the installer, I get an error message:

  Microsoft XNA Framework Redistributable 4.0 installation of refreshment
  The installer has encountered an error unexpected installation
  This package. This may indicate a problem with this package.
  The error code is 2908.
  [OK]
  The installation Wizard indicates that the State is: update record of components, with 0% complete. After pressing OK, the message reappears 9 - 10 followed by times of a greater error message:
  Microsoft XNA Framework Redistributable 4.0 installation of refreshment
  An error occurred during the installation of Assembly
  ' Microsoft.Xna.Framework.Avatar, fileVersion = "4.0.3090
  1.0 ", version ="4.0.0.00000", culture ="neutral", publicKey
  Token = "842CF8BE1DE50553", processorArchitecture = "M".
  SIL' '. See Help and Support for more information
  information. HRESULT: 0X8002802F
  [OK]
  The State now says: copy new files, and is 30% complete from the looks of it. After pressing OK, the program says that the installation ended prematurely, only by giving the option to press "Finish" and close the program.
  I'm running on a Windows 7 Ultimate 64-bit:

  Processor: AMD Athlon (TM) X 2 240 processor 2.80 GHz

  Installed memory (RAM): 4.00 GB

  System type: 64-bit Operating System
  Apparently, someone had the same problem with a similar question,
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/unable-to-install-XNA-Framework-40/5e44c3d0-7fb8-4C9A-8504-fa9bb37f3663
  But Hamilia S methods did not work and the links he posted

  http://forums.create.msdn.com/forums/p/68824/420097.aspx#420097

  http://forums.create.msdn.com/forums/56.aspx

  does not work for me: they send me to a page that don't talk how about "developing applications for Windows phone or Xbox" and redirects you to the windows phone / xbox live Web pages.

  A quick Google search led me to another thread dedicated to the problem:

  http://www.terrariaonline.com/threads/Microsoft-XNA-Framework-4-0-problem.5540/

  me and user "Kaboshi" has had the same problem, and and other users said:

  Download the newspaper probably will help because it will give developers more info focus on (once they're back).
  For reference here is a link to another relevant article, it might not help you directly, but it could be useful for developers or those seeking on the other on the issue and has basic techniques:
  http://blogs.msdn.com/b/astebner/archive/2010/12/29/10110053.aspx

  In the article I posted above, he says mscoree.dll could fail to update during the installation of .NET framework 4, and the Setup program may not be aware of it. Go to your windows system32 or syswow64 folder and check the properties of mscoree.dll - if it's version 2.0 instead of 4.0 then the .NET framework has not been installed correctly. See this article for more information.

  I checked mscoree.dll in my system32 folder and in the properties-> details, it indicates the version of the file / version of the product is 2.0.50727.4927 and last modified on 06/10/2009 16:40. Several messages later, one of the "nbeerbower" users seem to have found a solution:

  Hey everybody! I had exactly the same problem! In fact, none of my programs using .NET 4 would work! But I searched the internet to fix this bug.

  The problem is the result of .NET 4 installer never update .NET 2 mscoree.dll. So, here's the new dll and some instructions on how to solve this problem.

  http://www.Megaupload.com/?d=MBCL8TKC
  (if for some reason any you do not approve the download see here http://social.msdn.microsoft.com/Forums/en/vssetup/thread/a09baa85-635d-420c-a88a-de05f75c8140 to get otherwise)

  Hi, I'm nbeerbower. I have trouble with my .NET 4.0 and it generated an error 2908 Installing XNA which is necessary for terrariums.
  The problem is, because for some reason any .NET 4 does not update .NET 2 mscoree.dll.
  Here is a "kit" to help you fix it.

  1. open take Ownership.reg and add registry keys. This allows you to easily replace mscoree.dll
  2. go in Windows/system32 (if you have a x 64 OS also do the SAME procedure in the Windows/SysWOW64 folder)
  3. find mscoree.dll and right click and take Ownership(you can alsocheck properties and see version, if it's 2.00 then this fix will work!)
  4. replace the included mscoree.dll
  5. repeat in SysWOW64 so you have a 64 bit OS

  Have fun!

  -nbeerbower

  P.S., Make sure that you restart your computer after!

  This solves the problem for users, but I have a problem. Of course the Megaupload link no longer works and the other link.

  http://social.msdn.microsoft.com/Forums/en/vssetup/thread/a09baa85-635d-420c-a88a-de05f75c8140,

  also has links; This, specifically:

  2. Rename mscoree.dll.  It is a real pain.  Go here for the instructions (not for the fainthearted): http://social.msdn.microsoft.com/Forums/en/setupprerelease/thread/150d05c4-4df4-47ec-b7a6-a66f3a55cd08

  It can also be connected to the issues I had with installing the .NET Framework v4.0:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/NET-Framework-initialization-error/21d069d4-44b7-403a-9e1f-de6d75ffdc36

  Any help or the other problem is appreciated. It seems that other users have solved the problem, so there is probably a solution hidden in one of the threads that I missed.

  Hey there fellow. From the outset, I would apologize for bumping this thread if the OP found a satisfactory solution to their particular issue - as well as an apology to resurrect a debate closed if it's already been resolved.

  I came across this problem, try to run a particular game that required the .net framework version 4; a game that I had literally played earlier the same day. I use 32 bit Windows 7, so that the details of my solution may or may not be applicable to your situation. What I did to fix my problem was simply to repair my installations of .net Framework extended and .net Framework 4 Client Profile. After this, I restarted my computer, uninstalled my XNA Framework and reinstalled. After that, the game starts and runs without a problem.

  Not sure if my problem was an exception or if it will help someone else situation, but I thought I'd post my experience just in case it would be of any help. Good luck out there.

• Microsoft XNA 3.1 Redistributable Error 2908, cannot install.

  Hello

  I just bought the video game Magicka and cannot cross the same installation.
  XNA 3.1 is keeps me from jumping into the game with an error 2908.
  I can't even turn off "Windows features" as he appears blank and official guides do not seem to have done anything.

  Hello

  Try the procedure described in the following article:

  http://support.Microsoft.com/kb/931712

• NET of Microsoft. Framework error - Unhandled Exception has occurred in your Application

  Microsoft.Net Framework error message: Unhandled Exception has occurred in your application I receive this title of Microsoft.NET Framework error message: unhandled exception has occurred in your application.  If you click on continue, the application will ignore this error and attempt to continue.  If you click on leave. the application closes immediately.

  Help, please! I was told by some tech online that my registry keys have been corrupted or something! I don't know what to do, and I hope that this will not affect my computer like a virus or something. I tried to "repair" of microsoft .NET framework in my programs and features, but it did not work. What I'm doing!

  Microsoft.Net Framework error message: Unhandled Exception has occurred in your application I receive this title of Microsoft.NET Framework error message: unhandled exception has occurred in your application.  If you click on continue, the application will ignore this error and attempt to continue.  If you click on leave. the application closes immediately.

  Help, please! I was told by some tech online that my registry keys have been corrupted or something! I don't know what to do, and I hope that this will not affect my computer like a virus or something. I tried to "repair" of microsoft .NET framework in my programs and features, but it did not work. What I'm doing!

  Clean your existing .net versions using .net Framework clean utility (if applicable)

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Download and install the stand-alone Installer.... NET framework 4 and install it

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17718

• Microsoft NET Framework 1.0 error when installing Corel PaintShop Photo Pro X 3.

  OT: NET Framework 1.0
  I installed Corel PaintShop Photo Pro X 3.  It downloaded from the disc successfully but I cannot open the creation project. Windows I says error hae a Microsoft NET Framework 1.0.     When I try to open the program (Corel) I get a message that the application has generated an exception that could not be treated.  No registered JIT debugger was specified.  Other programs on the disc open OK.

  Salvation by the Lake.

  1. what operating system do you use?

  I suggest you to ask your question in the form below for better support.
  http://www.Corel.com/servlet/satellite/us/en/content/1152796555474

• Error code 66 is to update security for Microsoft NET Framework 4 on Windows Vista (KB2160841)

  When you try to install the update of security for Microsoft NET Framework 4 on Windows Vista (KB2160841) I get an error 66 a code, I can't identify the problem, I tried to install this update for some time (of the month) any other facility of updates without problem.

  Take a look at this:
  Windows update error .net framework 4 will not update - 66A error code
  http://social.msdn.Microsoft.com/forums/is/netfxsetup/thread/02b7b01f-2a04-4352-AFEB-3a5250ebe0ef
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Microsoft Office: Error 2908

  Hello
  I hope someone can help. I tried to install a new copy of Microsft Office Standard 2007 on a brand new machine Vista Acer Veriton. We have many of these machines (it's a primary school) and we have not encountered this problem elsewhere.
  The installer accepts the authorization key and starts the installation. To halfway through she freezes and gives the message;

  Error 2908. An internal error has occurred.
  ({D825F2FE-87AB-11D5-A54F-0090278A1BB8}) Contact Services de Support technique Microsoft (PSS). For more information about how to contact PSS,
  See c:\Users...

  He's then going to give me an address of file. When I try to access the file, it is said that there is not!

  Can someone explain what I need to do to fully install Microsoft Office on this computer.
  Thanks in advance,

  Run MS Update to install updates critics, reboot, run DiskCleanup and try again the cd

• Perche quando unloading Photoshop mi da error nell' sommergibili del Microsoft Visual C++ Redistributable Package (x 64) 2012?

  MI IF PRESENTED THIS ERROR:

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\JONATH~1\AppData\Local\Temp\{8649F5EF-16B0-4645-BE82-7F6E98C04F9E}\Photoshop_16 _LS20_win64\Adobe CC 2015\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  -------------------------------------------------------------------------------------

  Hello

  Reference:--

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5

  Error code: 6

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• XNA Framework 4.0 installs!

  A friend recently gave me Terraria on Steam, it installs the .net Framework, I need, I'd actually already. But this isn't the problem, he continued and tried to install XNA Framework 4.0 Redist and it won't install through Steam, and whenever I try through Microsoft I get the same error 2908. Ive searched the web for answers and no permit. Please help me!

  Hi LennonJ42,

  Try the procedure described in the following link and check if it helps:

  http://blogs.msdn.com/b/astebner/Archive/2004/11/10/255346.aspx

• XNA Framework 4.0 Windows 7 64 bit

  Hello, I have an error when I try to install the XNA Framework to play terrariums. When it is almost finished I get the error message "an internal error has occurred" then I click OK and click on finish on the installer. Features: CPU: Intel Core i7 - 4790 k @ 4.7 GHz GPU: nVIDIA GTX 770 (if it matters) Ram: 8 GB 1600 MHz

  Hello

  Thanks for posting your query in Microsoft Community.

  I suggest you to read the article on how to XNA framework 4.0 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/problems-installing-XNA-Framework-error-code-2908/af80e635-b2fa-477f-ac49-e6781d699f54

  
  Please do not hesitate to contact us if you need additional assistance, we would be happy to help you.
  Thank you.

• Internal Error 2908 {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} during the installation of a program

  Hi all

  I need help please. I get 3 errors when you try to install a program and I will include all of the below 3. Please help me get rid of this headache. Thank you.

  This is the first...

  Internal Error 2908. {837EE547-6D3B-7124-817B-A0DDC38CDA99}

  When I select OK I then get this one

  Internal Error 2908. {182C2188-3F15-CE6C-1FC2-23A0CB4637D1}

  If I hit OK once again I get a different error...

  Error 1935. "An error occurred during the installation of assembly ' vdFramedControl, Version ="6.1.60117.0", Culture ="nuetral", PublicKeyToken ="54EAC14E23C9EE53", ProcessorArchitecture = x 86." Please see Help and support for more information. HRESULT: 0X8002802F.

  It drives me crazy and I don't know what to do. Thanks in advance for any help that you could provide.

  Hi KelMil,

  1 Windows operating system you are using?

  2. what software are you trying to install?

  Method 1:

  You can consult the following thread link and try the steps Diana D December 1, 2010 and check if it helps.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.

  Method 2:

  You can also try to give permission for the two above mentioned registry keys. Check for multiple entries, registry keys, and give permission to all keys.

  a. click Start, type regedit in the search box and press on ENTER.

  b. click on edit and select find and type the copy and paste the registry key: {837EE547-6D3B-7124-817B-A0DDC38CDA99} and click Next.

  c. right-click on the key component and select permission.

  d. click Add, type everyone and click ok.

  e. Select group or the user name one by one and check the complete control of the area for all.

  f. click apply, click Ok.

  g. check for multiple entries for the key. If one is present, then repeat the steps above to give perimmision to all keys.

  Note: You must give permission to the {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} key by following the steps mentioned above.

  h. restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• At least once a day Microsoft net framework appears as an update? Why is it so?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What is a .net 4.0 security update?

  If so, try this:

  Credits go to jacvc and Control_tps (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ee945c20-a8c1-4b82-9b4c-d6dfae4c5337)

  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  If this doesn't fix it, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx), reinstall .net Framework 4.0 and try to reinstall the update.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/