Driver Reviver and Registry Reviver a con

Similar Questions

• Help with Hard Drive and registry

  Hey, it kinda turns out to be a long and difficult history, but I recently had a small problem that spread to a problem much bigger (and catastrophic).

  I had a problem with freezxing on my laptop (HP Pavilion Dv5 with the 64-bit version of Vista I think). I've tried a few things m ais it froze just in case. Finally I found someone who said they ran a registry cleaning program and that did the trick. I tried and I had no more freezing. Unfortunately, I connected an external hard drive and all hell broke loose. It froze and I turned off the laptop. I have it turned on and was greeted with this message:

  STOP: c000021a {Fatal System Error}
  The Session Manager failed to create protected prefixes system process terminate
  d unexpectedly with a status of 0x000003a (0x00000000 0x00000000).
  The system has been shut down.
  

  I tried to boot in safe mode and found:

  STOP: c0000218 {Registry File Failure}
  The registry cannot load the hive (file):\SystemRoot\system32\config\SOFTWARE or its log alternative.
  It is corrupt, absent, or not writable.
  

  Then, she went and made the collection of data, and that was all. After that, I tried the boot recovery option and that never worked. I searched internet and found a few people with similar, but never the same questions. Someone, somewhere, says something about execution of system restore after having access to the menu by pressing F8 at startup. I tried. It did not work. I pressed F8 at startup upward and chose the first option. It has established a list of things to try. System Restore (and other options such as checking memory and bring up the command prompt) did not work because the C drive has been used. Large. I tried to use the disks that came with my laptop and I never once found while they were actually useful because I could never the laptop to run.

  Now, I wanted to try to use the command prompt. Never really had a chance. Now, when I start the computer I'm greeted by the inspiring message of hard drive are not.

  Sweet. Now, I'm a little stuck on what to try. I tried to reset the BIOS defaults and nada. I have no idea what it must try now and would love to help anyone.

  I would be very happy and I thank you for your time.

  It depends on how much you have to pay to get the new hard drive installed and running. Get a quote for a computer shop trust you.  So I think that if the computer has been done what you wanted to do before he went wrong.  If it was enough for you and the price of the repair is not too high (maybe less), I would. If the price is more than $ 200, I would start thinking about applying your money towards a new laptop computer, but that cheaper isn't always the best deal.  Do some research and try some mobile friends to see if it is fast enough for you and you enjoy the feeling. Stop in some stores that display laptops and taste. Laptops with dedicated video card memory will do better with the games.  If the games are starting to become important to you, consider a desktop computer instead of a laptop where you can buy a killer video card. I like the new Ivy bridge to intel for laptops so look for it.  This is the new family of Intel processors. I7 Ivy bridge is the finest, then the i5, then the i3.  You really need to sit with someone who knows computers and discuss your needs for the future and how you want to use your computer.

• I lost all my icons for my CD (drive E) and my floppy drive

  Hello!  -J' I need help, ASAP, to put it bluntly, I lost all my icons for my CD (drive E)and my floppy drive, (A). I know I've lost, because they do not appear, under 'my computer' I use Windows XP home

  Edition.

  Please, can someone help me?   -Alternatively, the motherboard is completely shot?                         Thanks,-Geoff

  Hi Geoff,

   

  1. Remember to make changes before this problem?
  2. You get the error message?

  These problems may occur if there are corrupted or incorrect keys in the registry.

  
  Method 1: you can follow the steps described in the article below

  The floppy drive is missing from the folder my computer

  http://support.Microsoft.com/kb/812489

  
  Method 2: you can view the steps mentioned in the link below

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116 
  

  
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• several packages of creating clone/image files failed due to incompatibility and registry errors

  I tried several packages of creation of clone/image files. All fail send me cryptic messages about incompatibility errors and registry drive originally my problem.

  Question? is it possible to clone/image my hard drive so I can restore to a new drive in case of crash? Before asking to Customize that come with windows 7pro no longer works. I nedd some help and would fine the software that don't cost a fortune and require cancel updates.

  Hi Loran,

  Thank you for the update.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please come back if you face any issues.

• Cant unninstall lightroom 5.4 required to install update 5.5, I remove all the files and registry, but install fails

  Cant unninstall lightroom 5.4 necessary to install update 5.5, I remove all the files and the registry, but installation fails again and again, now I can't use lightrrom... Grins.

  I use the SSD drive and I can't have a lot of file uninstal (often having to clean disk)

  Thanks for help

  Hello Jeff,.

  Thank you very much for your reply, I use windows 8.1! I found the problem: to install the new version installation needs the program old installation (but I have remove all the installer, because they use a place a lot on hard drive (SSD)).

  I have uninstall all Adobe and reinstalled, I save the full installer on an external drive. When the installer asked the former installer I indicate to programm my drive external and everything works fine now.

  Thanks so much for your help, I just do not delete the old file (sad having to save old installler just to install the new).

  Wallie

  (Sorry my English)

• Divide drive merger and disable the failed drive

  So I have an iMac end 2012 27 "with a 1 TB fusion drive. Naturally the disk rotation has not now and the mac won't boot off the fusion drive. Running on my external drive USB 3.0 for now.

  I think ultimately for reliability I won't replace the drive spins and I'll go with an external thunderbolt SSD raid. But, how can I do to do a few things...

  1 - divide the merger in 2 discs disc so that I can format it and actually use the SSD which is always very good.

  2 - completely disable the spinning player who doesn't have to leave BONE trying to rotate upward and detects it and always tells me that he has not etc.

  Naturally, I try not to open the computer and disconnect the player. Yes, I have the skills to do that, I don't just want. So why I'll spend more of $ and get the raid external thunderbolt.

• Hard drive Mac and PC compatibility

  Hi, I just bought a new MacBook Pro that runs on Mac OS X El Capitan 10.11.5. The computer I used before is a Dell XPS 13 10 Windows running. I have a 1 external Toshiba Canvio Slim ii hard drive to keep everything. I know that, so that my hard drive Toshiba be compatible with the new OS X, it must be formatted, but I will be losing all my data (260 GB total). I want to know if this option works for me:

  I bought a LaCie 1 TB hard drive Portable Porsche Design with my new computer. Am I able to format my LaCie hard drive to have read/write on PC and Mac, then after it is formatted successfully, I plug it into my Dell with my Toshiba hard drive computer, drag and drop my data from my hard drive to my drive Toshiba hard LaCie (using my computer Dell Windows), and then have everything on my LaCie hard drive ready to be read or written on my new MacBook Pro (Mac) and on my Dell XPS (PC)?

  If not, what are my other options?

  My main goal is to be able to use one of these hard drives on my Mac and PC without having all my data erased. The trick is to get one of these drives compatible to use for my Mac and PC if I need to turn off the power from one to the other without losing my data. In addition, I want to be able to have all of my data stored on these drives ONE and not both. I want all in one place, rather than in two separate places.

  Thank you

  Ramin

  Windows in your Dell himself player will be in NTFS format. Standard a Mac can read NTFS but cannot format or write on NTFS. I have no idea what format the Lacie will come initially as, but for arguments sake lets say it will be HFS + which is the standard format used by Macs. Like standard Windows can't read or write disks HFS +.

  It is possible to format a hard drive on a Mac (or PC) as a format ExFAT. This format is readable and writable by Mac and PC. It cannot be used as a startup disk either on, or can it be used as a Time Machine backup of Mac disk. ExFAT is however very well to use as a disk transfer.

  It is possible to get additional software for the Mac to put into shape and the read/write to NTFS volumes. See https://www.paragon-software.com/home/ntfs-mac/

  It is possible to get additional software for Windows to allow it to format and write to HFS volumes +. Seehttp://www.mediafour.com/software/macdrive/

  Seagate, a maker of hard drives made a deal with Paragon Software as listed above. This agreement means a disk Seagate comes already formatted in NTFS and includes a copy of 'free' the Paragon on all your Mac software to read and write on this NTFS drive. See http://www.seagate.com/gb/en/support/downloads/item/ntfs-driver-for-mac-os-maste r - dl /

  I'd be a little worried about the above 'free' copy of Paragon Software in that a) is it still news?, and b) is the version of the software up to date so that it still works in El Capitan on a Mac. Older versions of the software will not work in El Capitan.

  A different approach, you might consider using "Migration Wizard" of Apple software to transfer files over a computer network between Macs and Windows PCs. See move your data from a Windows PC to Mac - Apple Support and the Migration of Windows Wizard v1.0.5.7 the concern here is that this tool does not appear to have been updated for Windows 10, it may or may not work so in Windows 10.

• iMac 21.5 "retina - HARD drive upgrade and / or install the Fusion drive?

  Hi all

  I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.

  Any entry received with gratitude

  Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?

• New drive HARD and OS upgrade on Equium A210

  I want to install a new SATA hard drive more and also upgrade from Vista to Windows 7 is only a problem at all and that I can use a normal Windows 7 disc.

  Hello

  Generally avoid any problem with drive HARD and OS upgrade. If you want to have the exact answer please let us know what model of laptop you have.

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• HP pavilion g6: driver ethernet and wi - fi

  Hello

  I can't find the driver ethernet and wi - fi for my g6 pavilion, I remember that before I formatted the computer it's Realtek, but now as I install it does not work. Please help me solve this problem.

  Give a look at THIS to see if the info in this thread is useful.

• S100, driver RAID and Win XP

  I just bought a S100. According to the company policy, I removed the pre-configured OS and added our own generation based on a disk from an earlier toshiba machine image. This procedure is usually simple and usually only requires that twist slightly to get the right drivers installed. With the S100 RAID drivers cause me a problem. Win XP does not see the disk hard by default in this machine and if you press F6 and provide the drivers from the floppy drive. If you do this, the drive is recognized and start installing XP, but a message will appear asking you for the Toshiba RAID driver a second time. For this second attempt XP does not seem to be able to read the disk A:\ more and so the installation can not continue. Has anyone seen this problem before, and if so, did you manage to solve it?

  Best regards, J.

  Hello John

  The Toshiba RAID driver must be added during the installation, when prompt to 'press F6 if you need to install a third-party RAID or SCSI driver.
  To do this, download the Toshiba RAID driver from the Toshiba web page driver download and extract the zip to a disk file. Connect the floppy drive to your computer before starting the installation.
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for XP or 2000 as required. Press 'Enter' to continue the installation.

  When you use Windows Setup to partition or format the HARD drive, the RAID driver is deleted in the process. This causes the shot the next time that the machine start-up. To avoid this, do all the partitioning and formatting before you run the manual installation of Windows.

  However, this behavior does not appear when you install Winxp Service Pack 2 integrated. It seems that the SP includes a hardware support. Always provide the RAID driver unpacked on the diskette, however.

  Good bye

• Hard drive failed and I lost my product key?

  Hi guys,.
  
  So my friends hard drive failed and unfortunetly he lost everything.
  
  I replaced the broken hard drive for him and reinstalled Windows 10. However when I went to check if the OS has been activated, it showed as not been activated? I thought the machines after that Windows 8 had their licance saved in the BIOS, so we do not have this problem?
  
  Also there is no sticker on the back or under the battery that contains the product key for Windows.
  
  I also talked to Microsoft, but they were uable to help.
  
  Any help is appreciated!
  
  Thank you.

  KiddG wrote:
  

  It's a HP Pavilion 15-p264na. It came with Windows preinstalled as an OEM licance Home 8.1. It was then upgraded to Windows 10 at a later date using the free update successfully.

  Then the second option mentioned above. Didn't it actually triggered successfully after 10 win upgraded?

  If so, you should be able to activate just fine without problems, IF you use the same edition of Windows. You write it housed 8.1 - you now install Win 10 Home? You mentioned 10 Pro down...

  So I guess I'll with your third option and using the recovery media?
  
  I have 2 HP drives here for Windows 10 Pro for two different HP devices. I think these are the recovery CD, it says that they cotain the client software, if that is correct? Can I use these discs Pro on a BONE at home? Or that I'd be better by following the links you provided?

  Laughing out loud. I'm sorry. I am afraid that you cannot mix just DVD / CD / etc - they are for a specific model for the specific version of Win / edition. You cannot use a recovery media for HP computer to another - it will simply not work 99% of the time. You cannot mix editions of Windows (the House is for Home, Pro goes to Pro).  You want the recovery media for this unit, you need to follow the links.

  However, IF you have enabled the upgrade of Windows 10 post fine, you can simply download Win 10 ISO from here:

  > > https://www.microsoft.com/en-us/software-download/windows10/

  Download the tool, it will download an ISO and burn it to a DVD or write on a USB key. Follow the on-screen instructions, skip entered the key and move on. After installation, Windows 10 HOME should activate fine using digital entitlement if 8.1 Home Win allowed initially.

  I would like to know how this goes for you.

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• Display driver problems and clicking noise with Satellite C670D-11R

  Hi all

  my friend bought a Toshiba Satellite c670d-11r in Germany on a catalogue (Otto to be precise) with Windows 7 Home Premium installed on it.

  After a few months he brought to a computer store and a service in the city, he lives to do a fresh install of Windows. A day ago he came to visit me and complained about how slow it was and asked me to install Windows again and that's what I was doing.

  After installing that I asked him about the CD of drivers he has no idea where he is or if he even had one so I downloaded all the drivers on the site and installed on her laptop except the display driver.

  First I unpacked it in the Appdata path that has been predefined, but that he would not launch after extraction, so I gave in a path custom and tried to run "Installtb.exe" but still once nothing happened so I decided to run the 'Setup.exe', he began installing CCC and after installation, I checked "Dxdiag" but it doesn't always recognize not the GPU in the view tab as in the previous version of Windows, as a "Radeon HD 6320" but as a "Standard video card" I tried everyhing I could come with but nothing really helped, a little later, I noticed a rattling noise where I think the HARD drive should be (to the right of the touchpad) I thought that I broke something , but he said that he noticed that also a few weeks ago by clicking.

  I'll post the dxdiag log now if this will help.

  + System Information +.

  Time of this report: 25/02/2012, 19:19:19
  Computer name: ZLATKO-PC
  Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: Serbian (Latin) (regional setting: Serbian (Latin))
  System manufacturer: TOSHIBA
  System model: SATELLITE C670D-11R
  BIOS: BIOS Date: 01/07/11 16:44:54 worm: 04.06.04
  Processor: AMD E-450 APU with graphics Radeon (TM) HD (2 CPUs), ~1.6GHz
  Memory: 4096 MB RAM

  Additional information:
  I'm not an expert at this, I have no epiriance with ATI graphics cards and it's a 64 bit version of Windows, as suggested.

  Thank you in advance.

  + The message was edited: useless info has been removed.

  Hello

  In regards to the HARD drive clicking noise:
  It is nothing unusual can happen with some kind of discs hard I have a few hard drives (internal and external) of two hard drives produce a rattling sometimes noise, but the drive HARD running and working properly so I guess that its ok but nevertheless if possible, back up the data always

  Regarding the ATI driver:
  The laptop belongs to the PSC4AE series.
  Choose the series C670D PSC4AE in driver download Toshiba form European page pilot would show you the driver compatible v8.812.2.2.

  You must download and unzip the package first.
  Now you should see the file TCA0056800E.exe.
  This file must be decompressed too

  Now, go to Device Manager and select the graphics card.
  Here to choose install driver then the manual installation procedure. Now point to the folder where you have unzipped the display driver.
  AFAIK driver for Win 64 bit files are placed in the driver-> display folder
  Usually the Windows operating system must pick up the right files to install the driver

  That s it