Driver sound on Pavilion g6-1215sv problem

Hello world!

I am using Windows 7 on my laptop Pavilion g6-1215sv. Yesterday I downloaded the audio driver from this site and after installation, the volume is preferable, BUT all Skype's sounds have disappeared, no one can hear me and I cannot hear, also no sound notification, etc... It happens just for Skype.

Can anyone help with this?

Thank you.

Hello

Verify the audio Skype configuration are selected good driver

Tags: Notebooks

Similar Questions

  • Help to new primary hard drive sounds: HP Pavilion 6620f PC

    I'm a non-technical guy who just replaced the main OEM 1 TB drive with a VelociRaptor 300 GB 10000 RPM hard drive. The installation went well, thanks to the fantastic instructions of the manual of HP and it works fine. Hard Disk Sentinel (free version) tells me that his condition is "perfect."

    Here's my question:

    • the new drive is intermittent but constant and subtle sounds and I don't remember hear them before.
    • Is there a problem or is it only a function of another type of hard drive?

    For any help or suggestion accepted with gratitude! I hope that I worry about anything, but do not have the technical expertise or experience to know!

    Thank you

    Linda

    Hi Linda,.

    Hard disks have different acoustic characteristics according to the manufacturers (and in overall models from the same manufacturer).  In addition, you went with a 1 TB of HARD drive that probably have a rotational speed of 5400 RPM on a faster drive.  If you are hearing just weak 'rattling', I think it's perfectly normal and given the utility disk HARD sees no problem with the drive, I would say that everything is fine.

    Best regards

    DP - K

  • Problem with Broadcom wireless driver for HP Pavilion 15-p053eu

    Hello, I have a problem with the installation of the broadcom wireless driver for HP Pavilion 15-p053eu running on Windows x 64 8.

    When I download and try to install the driver I get this error...

    I really don't know what to do...

    Hello:

    If you want to run on your PC W7, good wlan driver BCM you need which should produce a full-power signal.

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133353_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    You also need this software bluetooth...

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132205_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • problem with driver usb controller pavilion g7

    I need driver usb controller pavilion laptop g7

    PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

    PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

    Hello:

    You must install the AMD chipset driver and reboot.

    You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  • Info on the new driver sound for M70 - 309

    Hello!
    a question, the new audio drivers for Satellite M70-309, relased day 25/08/06, are wrong.
    They do not work, is a mistake?

    Thank you
    Ciao!

    Hello

    It is a problem with the new Driver Sound. Tomorrow becomes you a new version of this driver from the Toshiba site.

    By

  • Sound on Satellite P300-156 problems

    I bought a Satellite P300-156 1 year, mainly because he looked good and had Dolby Sound Room. However, I discovered not long after the purchase that he had no Dolby installed - so I tried to download the new drivers on the Toshiba site. They worked and gave me the SmartAudio app to activate the Dolby Virtual Speaker and Headphone Dolby of Dolby Sound Room. -The volume varies, as someone who has a hold on the volume dial. Not only when songs get more coins, but even just when someone speaks.

    This is crazy - and very annoying - and disappointing given the speakers harmon/kardon give amazing clarity. 3 driver updates later - still the same problem. Heard about people with the new P500 have the same problem - please does anyone have a solution? I got the problem under Vista 32 bit and now the same thing under 7 64-bit. It's a Conexant driver.

    The problem does not occur under the headphones/external speakers.

    Thank you.

    Hello

    If I understand this problem, that happened after the driver installation, and after activating the Dolby Sound Room.

    In Control Panel-> Audio Smart-> Audio second tab management, you will find a few options.
    The mode clasic has been marked.

    Uncheck this box and go to the Multi flow modes and configure it.

    I m not very well what settings you need to enable or disable because I m not P300 owner, but you should play around with these options and try different settings.

  • need driver sd for pavilion hp low graded victory 8 to 64-bit 7pro

    need driver sd for pavilion hp low graded victory 8 to 64-bit 7pro

    having been informed by HP suport, that there is no compatibility and none is available for a reader of sd card on my model # p7 - 1436 s that came with win 8 but was down ranked at point of purchase for win 7 pro 64-bit.  computer works CAD - CAM systems and must be in the format win 7, but there seems to be no pilot cross on the sd card reader.  CPU sees the card but do not charge card information or even show it in the icon drop-down computer showing what is in the processor.

    SD card works perfectly in another cpu, so the problem is in mine.

    Hello grunge.

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are having problems for your card reader to work in Windows 7. The card reader part number 644491-001 is used in more than 200 computers of HP Desktop running the Windows 7 operating system and more. I don't see not all pilots on all systems so I'm assuming it uses the default Windows drivers. As it does not appear on your system is running Windows 7, I will assume that it is related to a Windows 7 problem that a drive letter is not assigned to external storage devices.  I provided you with some steps to try to solve this problem for your below:

    Step 1. Click Start

    Step 2. Click on Control Panel

    Step 3. Click on Administrative Tools

    Step 4. Click on computer management

    Step 5. Click on disk management

    If he has not seen here, go to 'Action' in the menu bar, click on "Scan drives" and it should come

    If it does not have a drive letter assigned? If this isn't the case, follow the instructions below:

    Step 1. Right click on the removable drive

    Step 2. Click on change drive letter...

    Step 3. Assign a drive letter

    Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

  • Updating the graphics driver for HP Pavilion DV6 - 2157wm

    Hello world!

    I'm new to this community and I really need help guys. I need a driver for my laptop DV6-2157wm updated. His having intel hd graphics integrated in the laptop and the site of hp, the pilot is always 2009. No new update driver has been provided by HP. That the devil they do? Why are they not updating the driver? No indication of this problem will be really appreciated of you guys

    Thank you

    Fahad

    Download the drivers from the website of intel. you do a manual update which worked very well on my dv6-2150us, and I now have the 12/01/2012 drivers from intel.

    1 save the disk does not open for installation during the d/l process.

    2. open and decompress the files to the folder.

    3. via the devices pane control manager you'll select the graphics card.

    4. open the properties of the graphics card.

    5. Select the driver tab.

    6. Select Update driver.

    7. Select Browse my computer for driver

    8. Select let me pick from a list of drivers for devices on my computer.

    9. select disk, and then find the folder where you unpacked new pilots and selection of a folder named graphics.

    10. Select the igdlh64.inf file and off you go for new pilots being installed. Good luck, it works.

    HP Pavilion

    DV6-2150us

    Intel core i3 - 330 m, trying to switch to i7-820qm if I do work 8)

    * Please click on "Accept as solution" when you think that your problem has been resolved! *
    * Congratulations are greeted with joy! *

  • Adding a hard drive to a Pavilion 6000 series computer

    My Pavilion p6210f computer blew a motherboard and I could not find a replacement card, so I bought refurbished HP computer. It seems the same, but the model number is simply: P6000 series. I want to spend the p6210f hard drive into the slot of extension on the refurbished machine. Until I opened the box, everyone sees a problem with this plan?

    I am running Windows 7, so what matters.

    Linda820 wrote: my Pavilion p6210f computer blew a motherboard and I could not find a replacement card, so I bought refurbished HP computer. It seems the same, but the model number is simply: P6000 series. I want to spend the p6210f hard drive into the slot of extension on the refurbished machine. Until I opened the box, everyone sees a problem with this plan? I am running Windows 7, so what matters.

    Hello Linda820, here is the link for information on how to remove the hard drive from the Pavilion p6210f.

    Look at the bottom of the page for instructions on hard drive. It is a fairly simple process.

    The only real "shove" the process is the system of lock at the bottom of the hard drive cage. You can see in the photo instructions.

    Since you know exactly on the other HP model, it should be the same procedure to install the disk hard of the faulty system to the recently acquired system, or close to the same.

    You must cable Sata of the old system, given that the other system probably does not have one, and you need to connect to the right of the current hard drve Sata port port.

  • audio driver sounds, showing in Device Manager

    I bought a hp pc with win 7 Edition brand family for 4 years, but now his mother burned. now I had bought the new motherboard and installed win 7 home edithion, but not sound driver sound, showing in Device Manager. It automatically takes the builded driver win 7.

    Go to the website of the manufacturer of your motherboard support and search for Windows 7 drivers for your specific model number.

    If there are Windows 7 drivers, then download to a folder on your drive hard and install all of them, starting with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
    Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • I cancelled driver sound in Satellite Pro M70

    Help!
    WITHOUT DOUBT, I CANCELLED THE AUDIO OF MY SATELLITE M70 DRIVER.

    WHAT CAN I DO NOW?

    Please let me have a swer soon!
    Thank you

    Hello

    How about new installation of driver sound?

    You can find the drivers for Pro M70 on the European driver Toshiba page.

    http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

    But to be honest I don t understand how you managed it.

  • I can't find a driver for HP Pavilion g6 - 2355sr.

    Hello! Help me find a driver for HP Pavilion g6 - 2355sr. Ralink_RT3290_Bluetooth_01 (Eid hardware: USB-VID_148F & PID_3298 & REV_0000)
    USB-VID_148F & PID_3298)

    Hello:

    Try the driver BT directly from Mediatek...

    Bluetooth Driver (RT3290/MT7630)
    25/02/2015V11.0.760.0Win7 Win8 Win8.1

  • Need driver sound Vista for my Satellite L20

    Hello to all the boys, a question I need to know if there is a driver for Satellite L20 for Windows Vista? I need driver sound. Help me please. Excuse my English is simply the google translator: $
    Good bye.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23446

  • WIN 7 32 BIT DRIVER CHART FOR PAVILION DV9823CL

    I DON'T THINK WIN 7 32 BIT DRIVER CHART FOR PAVILION DV9823CL

    Hello

    You can try the driver from the following link.

    http://laptopvideo2go.com/NVIDIA/195series/19581_win7x32.exe

    Kind regards

    DP - K

  • How to add a 2nd hard drive for HP Pavilion DV7!

    How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

    (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

    Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

    (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

    Readers - Windows 7 PDF

    (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

    (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

    Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

    My solution.

Maybe you are looking for