driver TSSTcorp cddvdw sn-208bb problem

Similar Questions

• driver problem TSSTcorp cddvdw sn-208bb for windows 8.0 pro

  Hi I have updated from windows 8.0 windows 8.0 pro. My CD player stopped working following is the error coming out wen I run peripheral troubled shoot. can anyone help please. My laptop is Toshiba Satellite P845T-S4102.

  

  Hello

  Try to uninstall one or both of these programs... which ever you have... They have been known to cause this problem...

  TOSHIBA Recovery Media Creator

  TOSHIBA Disc Creator

• I put to level my hp CDDVDW SU-208BB in car... how high is the drive?

  Hi, I have a laptop HP Envy M4. Windows operating system.  My hard drive is out.  It's a Hp CDDVDW SU 208BB.  I'm looking to get into Blu Ray burner.  I already upgraded my 16 GB RAM and hard drive to a hybrid disc, i.e. verrrry fast.  A friend who is into computers told my laptop speed demon now could easily manipulate a Blu - Ray burner... My only problem, is that lead to go with.  I have two that I love... we are 12.7 mm in height, the other is 9.5 mm in height.  It is Panasonic and the other is LG.  I just need to know the height of the original drive.  I tried to find it online, but it seems to be a secret, no one can tell me.  Can anyone here help me out?  I don't want to pay for this info... worst I order one or the other, and if it does not fit, I will send it back.  Waste of time and patience.  Thanks in advance for anyone who can help!

  I think that the size is 12.5 mm. Readers of 9.5 mm may be suitable for smooth or ultrabooks I guess...

• Driver for TSSTcorp CDDVDW TS-L633C has a Code 19 issue.

  I tried the advice from this post, and it didn't fix my problem so I will post the question again.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-hardware/driver-for-TSSTcorp-CDDVDW-TS-l633c-has-a-code-19/b71b2899-4EEB-4C70-94dB-a714eda49cbc

  I tried the DVD online windows 8 works do not fix application - that didn't work.

  I was also on the Microsoft technical support without success. We even tried to install the driver of windows 7.

  Is it possible to use the Windows 7 driver somehow, or I'll have to wait for Toshiba to pull himself together and provide a driver of windows 8?

  Don't know if it's the same problem I had on my Toshiba with a Code 19 error with my Matshita DVD drive but I cured it by removing Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. Might be interesting to try :)

• Driver for TSSTcorp CDDVDW SN-208AB does not work.

  Hi, I have a problem with the driver for TSSTcorp CDDVDW SN-208AB. My computer is a Toshiba Satellite L850 - 1 L 1 with windows 8. I bought it 3/4 months ago, and I think this is the first time that I had to use the CD input, but the computer does not recognize the CD driver, so I can't access and use. When I go to Device Manager, there is a symbol of error and the specific error is something like (I've translated it in English to Italian): "cannot start this hardware device. The configuration in the registry information is incomplete or damaged. (Code 19) ». I read that other people have had a similar problem, but I really don't understand how this could happen, because it's a new computer.
  How can I solve this problem?

  Thanks to advice

  Thank you
  I had already tried this solution, without success. But this time, I don't know why and how it worked!
  I can finally use the CD driver!

• Reading CD/DVD and written Publisher details that problems detected by car is not able to burn (TSSTcorp CDDVDW SH-S202J) he can read, but he can't write DVDs/CDs

  ,
  My name is shabani, I have a CD/DVD writer is to say Samsung (TSSTcorp CDDVDW SH - S202J) it can play DVDs/CDs but stops when burned in any burning software. The drivers are 'ok' and is there something that can be done?

  Hello SanjuSS,

  If this still happens after two distinct formats, then you may very well be hardware problems here.

  When burn us a CD/DVD, we use a separate component that reads.

  There are diagnoses of material that accompanies this disc and can we run them.

  It would be wise to contact the manufacturer at this time.

  Best regards

  Matthew_Ha

• TSSTcorp CDDVDW TS-L633A has a Windows 7 pilot program

  It's after the diagnosis of microsoft. Reinstall watch device driver Succeeded on the right side.

  I was last to play around with iTunes downloading a CD later to an iPod. The CD/DVD does not automatically recognized. Even Window Media Player can not see the CD/DVD drive. Even the computer does not display the CD/DVD device.
  The window indicates that I have install the appropriate driver and in another part of the newspaper, he said the driver must be reinstalled
  I tried to run FixIt, but it does not solve the problem.
  How can I reinstall the driver?

  Hello

  Which Microsoft Fixit have you done to solve the problem?

  Run the troubleshooter and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I suggest you to perform multiple steps in a similar discussion.

  Driver for TSSTcorp CDDVDW TS-L633C has a Code 19 issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-for-TSSTcorp-CDDVDW-TS-l633c-has-a-code-19/38d693cb-83d4-450e-88ca-be0cd9e94b6a

  Hope this information helps.

• Engraver of CD/DVD TSSTcorp CDDVDW TS-L633M 0200 (ATA) fails on all brands of CD

  I had problems with my CD/DVD burner for years.
  
  My laptop is a "Pavilion dv7t-2000", P/N: NB406AV.
  I am running Windows Vista Home Premium 64-bit version.
  
  The CD/DVD writer on my laptop is a
  TSSTcorp CDDVDW TS-L633M 0200 (ATA).
  
  In the past every time I burned a CD, the CD would defects in one or more tracks.
  Sometimes the burning application would indicate that there are errors when writing
  and I would just take this CD and insert a different CD.
  
  Lately, this failure of writing happens much more often, but more often than that.
  the application hangs up during the writing of the directory on the CD.  "Cancel".
  button never works and even an "end task" from the Windows Task Manager.
  results in "the program does not.  On a stack of 50 Memorex CD - R CD,.
  44 failed, and the 6-CD which created a CD audio with success, all had obvious
  defects that jumps then read.  I bought a stack of 30 Sony CD - R
  CD 9 of the top 10 failed with the same problems and the successful single
  Burning audio CD produced audio flaws similar and jumps.  Rather than waste more
  CD, I started to look for other causes.
  
  I searched the CD write failures and found Memorex and other Web pages that lists all of
  compatible with its CD CD burners and my CD/DVD writer is not yet listed-
  This implies that their CD products do not work with my burner that came with my laptop.
  
  http://Support2.Imation.com/downloads/IMN/optical/compatibility/CDRCompatibility.PDF
  http://Support2.Imation.com/downloads/IMN/optical/compatibility/4XCDRWCompatibility.PDF
  http://Support2.Imation.com/downloads/IMN/optical/compatibility/10XCDRWCompatibility.PDF
  
  How can I get a replacement of CD/DVD reader/writer who settled in my HP laptop
  It is also compatible with the discs, CDs and DVDs currently available products today?
  
  -East-HP sells a replacement burner?
  
  -How much does it cost?
  
  -What phone number can I call to order?  (I have installed it locally.)
  
  Thanks in advance.

  Here's a selection of what is available to replace the laptop disks.  Choose a

  Unless the laptop has an unusual provision, most people should work.

• The fatal limit TSSTcorp CDDVDW TS - H653Z ATA Device

  I just hit the limit of CHANGE of REGION in the TSSTcorp CDDVDW TS-H653Z ATA Device. Impossible to change the limit over 4 times and the DVD DRIVE BECOMES USELESS? Integers HP Slimline is worthless to me. I can save the day somehow? Thank you.

  Try to reload the firmware.

  All PC DVD/CD drives have a max of 5 region code change.  You may be able to find a piece of software that will bypass this restriction.

• Satellite M40X driver PCI Device and NetworkController problem.

  Hello..

  I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
  Any suggestion on which driver files may resolve this problem.

  Thanks in advance
  Shine

  Hello

  As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

  Good bye

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• problem with TSSTcorp cddvdw sh-s223c drivers

  My dvd device has stopped working altogether.  I get the error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "but when I try to update it tells me that windows has determined the driver software is up to date.

  I uninstalled, reinstalled etc but no joy.

  It was fine before... nothing has changed as far as I am aware, no major updates, installs or downloads.

  Help!

  Hello

  Method 1: I'd say you run the fixit provided in the link and check if this can help:

  http://support.Microsoft.com/kb/982116

  Method 2: run the fixit for the link if the problem persists after you run the fixit above:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: you can also run the fixit from the link:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Problem with the CD ROM TSTcorp CDDVDW SN-208BB on SAMSUNG NP300V5A-A03US

  My CD Rom has problem with TSTcorp CDDVDW SN-280BB. Can you please provide assistance? Thank you in advance.

  Try to remove the entry from the Afc that relates to afc.sys.

  To remove the Afc entry double-click LowerFilters and, under value data, delete afc > OK

  Create a System Restore Point beforehand and restart the computer later.

• Seagate drive back up the partition problem

  Hello

  I have a problem with a Seagate drive on my mac.

  The drive is 1 TB and I formatted into 2 partitions: 1 exFat and 1 for Time Machine. All worked fine for the last 2 years, but now when plug the drive into my mac it loads only the partition exFat (I can access the content of it.).

  Backup partition isn't appearing any more. I tried to open disk utility, but it won't let me see my discs, while the Seagate is connected. (I thought about it when I unplugged the Seagate drive, everything is back to normal).

  If I want to eject the disc it will freeze it and drive the LEDS will not stop fashing until I take out the usb cable.

  Experienced this kind of problem?  I would be very grateful if you could help me.

  
  

  MacBook Pro with end of 2013 Retina display, OS X El Capitan

  When you used the drive the first time, have you installed the utilities supplied on the hard drive?