drivers for root of fresco logic usb

Similar Questions

• I need drivers for Fresco Logic USB 3.0 Root Hub on Asus 53 SN Win8 Pro.

  After a reinstall of Win 8, Manager of devices shows a driver missing for Fresco Logic hub USB 3.0. The series of Fresco Logic FL1000 Controller seems to work fine.

  The hardware ID is FLUSB\ROOT_HUB_FL30
  Prior to the relocation, there is no problem, but it took a while to find all the drivers after the upgrade of Win8 of Win7. But I can't remember how I had solved the problem right there. There is no drivers for Asus.
  If anyone has solved a similar problem would offer a way, I would appreciate it a lot.

  Hello

  I understand that you need drivers for Fresco Logic USB 3.0 Root Hub for laptop running Windows 8.

  I suggest you to download and install the drivers from the link.

  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=271&m=N53SN&OS=30&ft=22&F_NAME=USB_Fresco_Win7_64_Z301163.zip#USB_Fresco_Win7_64_Z301163.zip

  Given that Windows 8 compatible version of the drivers is not available, I suggest you to download Windows 7 compatible drivers from the link and install it in Windows 7 compatibility mode.

  See the link given below to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  I hope the information helps to find the drivers for Fresco Logic hub USB 3.0 root, if you have requests or questions about Windows, feel free to post. We will be happy to help you.

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• fresco logic usb hub

  do I need this product on my laptop

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  Fresco Logic is a company of chip offering advanced solutions that offer a very effective connectivity such as USB 3.0 to manage storage and mobile devices. Fresco logic Usb root hub is a USB driver from your Windows 7 computer, allowing you to access external USB drives.

  Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• where can I get the drivers for a HP Pavilion a1514n usb?

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  Thanks for any help.

  Dennis

  I already tried it did not work.

  However, I understand the real issue.  Drivers works in safe mode but not in normal XP mode.

  I will close this topic and open a new one with the correct title.

  Dennis

• Linux drivers for the acquisition of data USB-6229

  I would use a USB-6229 with Linux and support driver selection guide said that this model is not supported.  However, the 6218 and others are supported.  Is it possible to use 3. 5B pilot defined for a USB-6229 with reduced functionality?  Is it possible, with some basic Linux knowledge codification driver of change 3. 5 b drivers to work with a USB-6229?

  Kind regards

  Craig

  Hi Craig,.

  That is right.

  Best,

• drivers for the printer port logical interface

  where and how set interface pc and printer driver will not connect.

  Hello

  1. What is the brand and model of the printer?
  2. what exactly is the problem?
  3. what happens when you connect the printer? If you receive an error message and then, after return the exact error message.

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

• SM Bus controller and controller USB drivers for Pavilion P6 - 2307 has

  Hello

  I am trying to find the drivers for SM Bus controller and USB controller for the Pavilion P6 - 2307. If I go to download drivers and download updates, it does not install it. I run Windows 7 64 bit and I made sure I downloaded the correct drivers.

  At their launch, Windows 7 comes in asking if the run installation program correctly which means that somehow it didn't. It then asks if you want to run it in compatibility mode and if I say yes, nothing happens.

  Can you get it someone please let me know where I can find the correct drivers to make it work on Windows 7 64 bit.

  Thank you

  SAJ

  Hello

  Please use the following driver for SM Bus controller:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5037949 & prodNameId = 5037951 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-88640-1

  and what follows for USB:

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56138.exe

  Kind regards.

• SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

  Hello

  My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

  We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

  I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

  We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

  Any help/pointers gratefully received

  TIA

  Elmer

  Hello

  Please check the following post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

  Kind regards.

• Why and how to get around: when a Hub USB3 help Fresco Logic (see details) brand integration features VirtualPC hang

  Hello

  For a long time (over six months) I could not start VirtualPC without error on "integration features": 'Unable to load' 'had been not activated. "

  So I won't be able to access a lot of data that don't have more not currently compatible software Win7 (x 64).

  I did a lot of tests and research without success.

  I have (which is another topic on the logic of the fresco) a problem starting system when an external hub USB3 using drivers Fresco Logic, the boot hangs at bios phasis.

  I had the 'fire', try to start VirtualPC after unplugging the Hub-USB3: it starts perfectly.

  The consequence is that it is sure that there is something in the driver that makes it impossible to establish the link to records managed by the usb3 hub using these Fresco Logic drivers (which one?).

  My questions are:

  1. Is - this known issue (I have not found)
  2. It is possible to avoid this problem other than to unplug the Hub-USB3 and the corresponding disk (work used about now: disconnect the drive to usb2 and usb3 hub)

  Best regards

  Trebly

  Note:

  Drivers 3.0.110.12

  Fresco logic driver xHCI USB3 hub root

  Fresco logic FL1000 Controller Hub USB3 xHCI series

  SP1 Win7 x 64 on ASUS G73SW

  Hello

  I understand that you are having problems with Virtual PC to start when USB3 hub is connected.

  Since the issue is with virtual PC I suggest you post your query on TechNet forum for specialized assistance.

  See the link below

  https://social.technet.Microsoft.com/forums/en-us/home?brandIgnore=true&sort=relevancedesc&searchTerm=Virtual+PC+Windows+7

  I hope this helps. Please post if you need additional assistance, we will be happy to help you.

• fresco logic USB3, error code52 in win7 home premium x 64

  Hai, I'm sorry my bad grammar meybe. I have problem with my laptop win7 home premium x 64, fresco logic USB windows post-installation put updated my modem can't read SIM card, I use a modem ZTE MF627 smartbro. How to solve my problem?

  If it worked before, I suggest to perform a restore of the system to a restore point before the update and

  do not update the driver.

  http://www.SevenForums.com/tutorials/700-system-restore.html

  Many manufacturers of computers using customized versions of pilots and their equipment that might not be compatible with the windows updates.

  If you want to check for an updated driver, visit the manufacturer of the laptop support.

• Cannot find drivers for chipset for windows 7 g6 - 2248ca

  I deleted windows 8 and installed windows 7 64-bit. I looked around and Paul Tikkanen still messages this link for drivers for the chipset and says to download the first thing:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  However, I can't find anything. There is no chipset drivers download link.

  What can I do?

  Thank you very much

  Please see AMD Chipset Drivers for the AMD Chipset / AHCI / USB 3.0 driver.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pci usb 3.0 of fresco logic card does not

  OK, so I was of the first usb 3.0 the fresco logic card. This card works perfectly under Linux so I know the card works. The card is labeled fl1000g and taken in a PCI standard and has a usb port.

  My computer is:

  HP elite 8200

  Windows 7 Professional 64 bit

  Processor: intel core i7 2600

  RAM: 12 concerts (upgrade to 32)

  Power color ATI Radeon HD 7750

  Windows driver attributes to him is "PCI standard PCI to PCI (filtered Matrox) bridge" I tried to download the drivers of Fresco Logic, looking for updates to windows, help options, remove the driver faulty and much more with no success. I tried many drivers, no matter what I do, windows keeps assign the same wrong driver. The fresco logic drivers keep saying that "there is no usb 3.0 found fresco logic controller. I believe that since this card once worked in windows but now does not work, the device id has been removed from the list of device or windows hardware? The hardware id is:

  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000 & REV_AA
  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000
  PCI\VEN_10B5 & DEV_8112 & REV_AA
  PCI\VEN_10B5 & DEV_8112
  PCI\VEN_10B5 & DEV_8112 & CC_060400
  PCI\VEN_10B5 & DEV_8112 & CC_0604

  Thank you for your time.

  try to uninstall the device from Device Manager driver and reboot and see if it works

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!