fresco logic usb hub

Similar Questions

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• I need drivers for Fresco Logic USB 3.0 Root Hub on Asus 53 SN Win8 Pro.

  After a reinstall of Win 8, Manager of devices shows a driver missing for Fresco Logic hub USB 3.0. The series of Fresco Logic FL1000 Controller seems to work fine.

  The hardware ID is FLUSB\ROOT_HUB_FL30
  Prior to the relocation, there is no problem, but it took a while to find all the drivers after the upgrade of Win8 of Win7. But I can't remember how I had solved the problem right there. There is no drivers for Asus.
  If anyone has solved a similar problem would offer a way, I would appreciate it a lot.

  Hello

  I understand that you need drivers for Fresco Logic USB 3.0 Root Hub for laptop running Windows 8.

  I suggest you to download and install the drivers from the link.

  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=271&m=N53SN&OS=30&ft=22&F_NAME=USB_Fresco_Win7_64_Z301163.zip#USB_Fresco_Win7_64_Z301163.zip

  Given that Windows 8 compatible version of the drivers is not available, I suggest you to download Windows 7 compatible drivers from the link and install it in Windows 7 compatibility mode.

  See the link given below to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  I hope the information helps to find the drivers for Fresco Logic hub USB 3.0 root, if you have requests or questions about Windows, feel free to post. We will be happy to help you.

• drivers for root of fresco logic usb

  Hi, I just bought a Hp 13 folio - 1008tu and it works well except for the usb 3.0, which does not recognize any connection mouse for example, I've got 2 mouse wireless and when I put in there wireless adapter it doesn't recognize it and when I went into the control panel and looked at the other devices, it comes up with an error couldn't find a driversoftware for your device and Windows could not install your fresco logic usb root. Can someone help please I really need to access this usb because my laptop only comes with a USB 2.0 & USB 3.0. Thanking you in advance.

  Hello

  Try to download and install the driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59929.exe

  Kind regards

  DP - K

• Folio 13-2000: Folio 13 - upgrading to Windows 10 and USB Hub 3 driver error

  I just upgraded to Windows 10 and found a USB port (left side) does not not and verify that there is a driver for Fresco Logic USB 3.0 error root hub error friv. Previously the USB port works well when he was Win7. Updates driver or the driver who needs to re - install?

  Broadcast

  Please first install the Intel® Chipset Device Software setupchipset.exe

  Reset

  Read the page

• fresco logic USB3, error code52 in win7 home premium x 64

  Hai, I'm sorry my bad grammar meybe. I have problem with my laptop win7 home premium x 64, fresco logic USB windows post-installation put updated my modem can't read SIM card, I use a modem ZTE MF627 smartbro. How to solve my problem?

  If it worked before, I suggest to perform a restore of the system to a restore point before the update and

  do not update the driver.

  http://www.SevenForums.com/tutorials/700-system-restore.html

  Many manufacturers of computers using customized versions of pilots and their equipment that might not be compatible with the windows updates.

  If you want to check for an updated driver, visit the manufacturer of the laptop support.

• Pci usb 3.0 of fresco logic card does not

  OK, so I was of the first usb 3.0 the fresco logic card. This card works perfectly under Linux so I know the card works. The card is labeled fl1000g and taken in a PCI standard and has a usb port.

  My computer is:

  HP elite 8200

  Windows 7 Professional 64 bit

  Processor: intel core i7 2600

  RAM: 12 concerts (upgrade to 32)

  Power color ATI Radeon HD 7750

  Windows driver attributes to him is "PCI standard PCI to PCI (filtered Matrox) bridge" I tried to download the drivers of Fresco Logic, looking for updates to windows, help options, remove the driver faulty and much more with no success. I tried many drivers, no matter what I do, windows keeps assign the same wrong driver. The fresco logic drivers keep saying that "there is no usb 3.0 found fresco logic controller. I believe that since this card once worked in windows but now does not work, the device id has been removed from the list of device or windows hardware? The hardware id is:

  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000 & REV_AA
  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000
  PCI\VEN_10B5 & DEV_8112 & REV_AA
  PCI\VEN_10B5 & DEV_8112
  PCI\VEN_10B5 & DEV_8112 & CC_060400
  PCI\VEN_10B5 & DEV_8112 & CC_0604

  Thank you for your time.

  try to uninstall the device from Device Manager driver and reboot and see if it works

• Why and how to get around: when a Hub USB3 help Fresco Logic (see details) brand integration features VirtualPC hang

  Hello

  For a long time (over six months) I could not start VirtualPC without error on "integration features": 'Unable to load' 'had been not activated. "

  So I won't be able to access a lot of data that don't have more not currently compatible software Win7 (x 64).

  I did a lot of tests and research without success.

  I have (which is another topic on the logic of the fresco) a problem starting system when an external hub USB3 using drivers Fresco Logic, the boot hangs at bios phasis.

  I had the 'fire', try to start VirtualPC after unplugging the Hub-USB3: it starts perfectly.

  The consequence is that it is sure that there is something in the driver that makes it impossible to establish the link to records managed by the usb3 hub using these Fresco Logic drivers (which one?).

  My questions are:

  1. Is - this known issue (I have not found)
  2. It is possible to avoid this problem other than to unplug the Hub-USB3 and the corresponding disk (work used about now: disconnect the drive to usb2 and usb3 hub)

  Best regards

  Trebly

  Note:

  Drivers 3.0.110.12

  Fresco logic driver xHCI USB3 hub root

  Fresco logic FL1000 Controller Hub USB3 xHCI series

  SP1 Win7 x 64 on ASUS G73SW

  Hello

  I understand that you are having problems with Virtual PC to start when USB3 hub is connected.

  Since the issue is with virtual PC I suggest you post your query on TechNet forum for specialized assistance.

  See the link below

  https://social.technet.Microsoft.com/forums/en-us/home?brandIgnore=true&sort=relevancedesc&searchTerm=Virtual+PC+Windows+7

  I hope this helps. Please post if you need additional assistance, we will be happy to help you.

• external usb hub not detected in vista sp2-hub external power supply a

  I can plug my external hard drive directly into my laptop and it is detected instantly.  If I use the external hub, the drive is not detected.  all the drivers are updated, no conflict of resources in "not advanced" deactivation of controller caused improved host machine to freeze and had to do a restore.  There are many applications of this kind.  Please note that the procedures on Hub controllers to uninstall gave results little according to the correspondence of blog.  No matter what other tactics very appreciated.  will try to uninstall, but skeptical.  Intelligence is in the hub of USB 2.0 on the laptop, as evidenced by its ability to detect.  He can not just extend to the external usb hub.  Please advise, it defies logic.

  Hello

  The player and the hub are not compatible I've seen. Maybe try a different HUB.
  (Is the HUB you use powered, otherwise this could also be a possible cause of wiring).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]

• A powered USB hub will support Ethernet / USB?

  Wifi in my office is uneven, so I need to wire a Macbook Pro (if that's the term). Because the Macbook Pro is not an ethernet port, I get an ethernet cable / USB. I also get a USB hub with an AC adapter.

  I know that you should not the ethernet cable / USB in a hub that is normal because it won't have enough power. But a powered hub will provide enough power for thin ethernet connection? (This laptop gets transported frequently, so I want to minimize the number of items that need to be plugged in every time.)

  Thank you-

  Christine

  I wouldn't use a usb to Ethernet port, I would use the port of Thounderbolt ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Airport Extreme and USB hub

  Hi all!!

  Witch of USB hubs with printer and hard drive connected can work with last gen extreme airport?

  Witch is good, the best of the witch? Powered? No powder?

  You can use any hub powered; USB port of the AirPort Extreme provides only a limited amount of energy itself, and is not enough to support many readers.

  (142446)

• Time machine on a usb hub

  Last summer, my iMac (running El Capitan) 2010 started hooking serious problems where the only solution would be to perform a reboot of the material.  After much experimentation and running on an external drive, I discovered that Time Machine was the culprit.  That is, when TM was off, the Mac has worked well, but if I turned back on, after 12-24 hours of TM, the Mac, would essentially become unusable and require a restart of hardware.  While I would certainly prefer to have current backups made via TM, there is nothing on this machine that had not been saved on other storage devices, so I was happy to let it go for several months.  Thinking maybe TM two disks, I had been using had been corrupted, I have them off and on again 5 TB (internal drive is 1 TB).  Once again, the same results.  Thinking maybe the USB hub was at fault, I replaced the hub last night.  This morning, everything seemed fine, but four hours later, after being in mode 'sleep' for most of the time, it was frozen again.  I have attached from the player to the USB port on the iMac Freedmen and will wait to see what happens.

  Now I read that Apple has recommendations for the use of TM and nowhere in there is a mention, a USB hub, for or against.  Anyone has any information (even if it's just anecdotal) regarding the use of the Time Machine disks via a USB hub?  For the record, the drive is a Seagate 5 to, USB 3.0, and I connected via USB 2 and 3 USB hubs with the same results (suspended).

  Anyone who can shed light on this aura of gratitude.  It has been confusing me for some time - especially since it seems that nothing of what I found to indicate that you can not or do not use a Time Machine drive via a USB hub.

  These hubs are externally powered? And what else is connected to them?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0