drivers for USB to serial port cable

Similar Questions

• Need drivers for USB 2.0 Port Replicator

  I just bought a Satellite Pro laptop computer with the Windows Vista operating system. I would use my replicator USB ports, but you need to download the driver for this? Can someone tell where I can find a site for me?

  Hello

  I Don t understand why you need the drivers for a usb port replicator? Usually you don t need drivers because windows automatically installs the port replicator.
  Would be interesting (and useful) to know that you have materials. Tell me what portreplicator and mobile you have.

  Would appreciate some comments.
  Welcome them

• Error 28 no drivers for (usb) universal serial bus controller

  my mouse keeps disconnecting

  hardware ID

  PCI\VEN_8086 & DEV_1E31 & REV_04
  PCI\VEN_8086 & DEV_1E31 & SUBSYS_84CA1043
  PCI\VEN_8086 & DEV_1E31 & CC_0C0330
  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  problem code

  0000001c

  also a yellow triangle

  Did you check the Asus website to see if they have a version more recent, or just reinstall it they have.

  http://www.ASUS.com/motherboards/P8Z77V_LK/HelpDesk_Download/

• How can I download the drivers for the Universal Serial Bus controller?

  After many restarts and troubleshooting tests, I had to go into Device Manager and uninstall some drivers under USB bus controllers because I was faced with a problem where my usb ports were not recognizing my mobile. I can't find drivers for usb on hp website?

  HI @sazz1295 ,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP laptop and the USB doesn't work does not correctly. Here is a link to solve the USB connections.

  I would like to uninstall all listed in the universal serial bus controllers list.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• Can not find the drivers for USB

  I'm trying to update my USB drivers and although I have loacted the list of available drivers, there don't seem to be any USB ones.

  Hello

  Why do you want to update your USB drivers? If you don t have win95/98/me you don t update anything it either because the only drivers for USB are integrated into windows.

  You can only update the latest chipset drivers that could improve the performance of USB and fixed a few bugs. But it depends on what chipset you have and if the manufacturer of the chipset offers the chipset drivers.

  See you soon

• Receive the error message"cannot find drivers for USB\VID_2001" at startup

  Original title: can not find the drivers for USB\VID_2001
  This error seems to be related to a USB network card, however; the only one that I ever try to install works like a charm... except for the error message which keeps appearing in the message center. Any thoughts on how to solve this problem?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer in check and clean boot.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• HP for computer laptop-14-r100ng: drivers for USB ports

  Recently, I've killed my HP laptop laptop-14-r100ng of Windows 8 for Windows 7. Only Windows 8 drivers are listed on the support page, but they seemed all to install and works great. The only problem is that my right two USB 2.0 USB 3.0 ports do not work after Windows loading upward. It is not all the drivers on the support and Windows Update page cannot find them, nor can many programs update driver - it is just seen as a Serial Bus controller universal (USB) unknown in Device Manager.    Any idea where I might be able to get these drivers?

  Try the following driver.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5449369&swItemId=ob_132256_1&swEnvOid=4059

  Many thanks for this go to @Paul_Tikkanen

• Said device USB to serial port Manager works, but it is not

  Original title: PL2303 USB to Serial No. GB
  My laptop is running Windows 7. I loaded the drivers PL2303. The Manager of said devices usb-serial comm port works. Set at 9600 baud, 8 No 1 order no flow.
  The GPS is a Garmin etrex Euro software version 2.06. GPS version model 156 206.
  I communicate successfully with the GPS unit via an DB9pin port at the back of my office. 9600 8 No 1 Garmin format.
  When I added the USB cable series to communicate via a usb port the "EasyGPS'program cannot read the GPS.

  I down loaded the PL2303 drivers for my desktop (XP) and the same problem occurs.

  I get the message ' device working properly "for both laptop and desktop."
  There is however no communication to the GPS.
  I tried again via the DB9pin port and communication are OK.

  Any Suggestions
  Thanks, Jim

  Hello

  I suggest you to join easygps helpdesk on this issue.
  www.EasyGPS.com/support.asp

• USB to serial port, Com port to use.

  I have Windows 7 64 bit Ultimate, evga 58 MB Intel i7 950 3.06 GHz, 6 GB ram, many locations for usb. I have a weather station "Oregon Scientific WMR968, I plugged my XP PC via a"usb to serial"cable, it worked well, giving me a com port to use for the software, but it does not work with Windows 7. It installs an input usb device, under the label HID, but not a COM port I have tried many drivers, but she finished in the same way, "peripheral usb entry" NOT a COM port I have tried to install .inf and who does not work either. I tried to update driver, and then point to the .inf and still no good. How to do this job, please. ?
  Frustrated,
  Robert

  Hi Androman,

  First of all I suggest you to check if the Oregon Scientific WMR968 is compatible with windows 7 or not.

  Check out the link given below to the windows Compatibility Center 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If it is not compatible with Windows 7, then install the drivers in XP sp2 compatibility mode and also to contact the manufacturer for drivers that are updated that are compatible with windows 7.

  Select the option for windows XP sp2 and install the drivers.

  For more information, visit the link given below:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• USB to Serial Port - Code 1, the driver Installation

  I have problems to install a USB driver for a USB Serial Port. In the divece Manager (Serial Port (COM & LPT) CODE of ERROR 1) appears an exclamation point and there is an option to reinstall the driver, but windows is unable to complete the installation. Please, help, thank you

  In Device Manager, delete all references to this port (remove entries) so it's as if the port did not even exist.

  Then click on start / Control Panel / Add Hardware and have it look for new hardware devices.  If all goes well it will go to the Port and ask drivers.  If it is not, select the option to find the device, and then select USB Serial Port (or which option he plans that comes closest).  Follow the procedures.  Try to install the drivers now that Device Manager is clean and if all goes well they will now install and you're ready to go.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite Pro A120 and WXP - need drivers for USB and SD slot

  Hi guys,.

  I have a Satellite PRO A120 PSAC1E XP, I need to find the drivers for the USB port and SD memory card port.
  After reinstalling the operating system won't work.

  For USB, you need to install driver chipset and SD card, you must install SD Secure module and later the two SD utilities.
  Please download the Instructions of facilities and install all the stuff following this order of installations.

  If you have, so nothing can be wrong.

• missing drivers for usb and ethernet for windows 7 64 bit edition controller Home premium

  Hello, I am running windows 7 64 x edition Home premium bit on my hp laptop pavilion g6 2303 sm.

  I'm having a hard time finding some drivers for the following devices.

  Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  (usb) universal serial bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04
  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C
  PCI\VEN_8086 & DEV_1E31 & CC_0C0330
  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  thnx in advance

  PS, I have not to downgrade my system, I bought the laptop without any installed system and I decided to install win 7 because I prefer.

  Hello:

  You can use all the W7 x 64 drivers and software for this model on the link below.

  Product for your laptop specifications indicate that there AMD/Intel switchable graphics.

  This means that you must install the AMD graphics drivers, who will install the drivers for the AMD graphics cards and Intel in your notebook.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311

  The drivers you need in the order you posted them are...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102604-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102497-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

• USB to Serial Port Adapter

  Hi, my laptop is not a serial port.

  If I want to connect to some hardware using RS-232, RS-485, CANBUS etc, will I have problems using a serial USB adapter?

  When I was programming PIC microcontrollers, we were told not to use adapters to program the PIC. I found this a little confusing because the signal from the adapter must be identical to what would come of a serial port. I don't know what is the reason.

  Are there any known issues using a serial USB with hardware adapter (specifically the sbRIO-9651 reference carrier I use and also just in general) or I would be fine to use it?

  I have a box of NI USB - 232 which will stop working.  Not sure if it's a loop of mass or something with signals through it, but... Yes, they didn't last real long in my experience.  (It was years ago, I sent a bunch of back, don't know if improvements have been made since that time.)

  IOGear GUC-232 has and from SILabs CP2102/MAX3232 work well for me. never had a problem with those.  Anything FTDI is solid, beware fake chips with this manufacturer.

  7Fh has a HID-UART chip available (CP2110), which works well on machines that have restricted permissions for driver installation.

• Slow transfer speed for USB 3.0 ports

  I have a USB 3.0 Seagate external hard drive connected directly to one of the USB ports 3.0 at the back of the computer with the cable that came with the drive. Whenever I turn it on, I get the message "this device can perform faster - this USB mass storage device can transfer information faster if you connect it to a USB 3.0 Super speed.

  I tested the speed of the hard drive and transferred on a file of 1.16 GB in 58 seconds of my drive "C".

  I also transferred the same file in the same place, for comparison, on a hard drive 10 years from an old computer which is now in a closed Chamber. This hard drive is also plugged into a USB 3.0 at the back of the computer with a USB 2.0 cable and the files had 57 seconds to cross.

  So that would mean that the Seagate drive does not work at the speed of USB 3.0.

  Can you please advise me as to how I can get the right speed for my USB 3.0 ports?

  DesF,

  You can check for a driver to chipset update for your system.

  Please keep in mind that it is a rotating disc and data transfer speeds do not match the theoretical bus speed. Certainly not the often claimed "ten times faster than USB 2.0! In addition, there a 5900 RPM disk, so a little slower there also.

  A tweak, you can try is to make sure that drive policy properties tab is set for best performance.

• HP 3005pr USB 3.0 Port replica: software for USB 3.0 Port Replicator

  Hello!

  CAN´t find the software for 3005pr 3.0 HP Port Replicator Port HP support.

  Hello

  If the device has win 10 OS:

  Please find the driver below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387722 & swItemId = ob_165439_1 & swEnvOid = 4192

  Check the drivers for the device that you are trying to connect:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5387722 & swLangOid = 8 & swEnvOid = 4192

  I hope it helps

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!