HP for computer laptop-14-r100ng: drivers for USB ports

Similar Questions

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• HP laptop - 15-af138au: HP for computer laptop-15 af138au - drivers (Wifi, Bluetooth, etc...)

  Hi all

  Nice day. Yesterday I bought HP laptop - computer laptop 15-af138au.

  But I'm not able to find the right driver for the laptop.

  Please help me.

  OS: Windows 7-64 bit

  Model: HP drivers for computer laptop-15 af138au.

  Driver needed: Wifi, Bluetooth, etc...

  I am so scared now.

  Really Appricated...

  Hello

  Please try the chipset:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Then try to restart

  Wireless: http://h20564.www2.HP.com/hpsc/SWD/public/Detail?sp4ts.OID=6943827 & swItemId = ob_145419_1 & swEnvOid = 4058 #tab1

  Bluetooth: FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe  

  Touchpad: http://www.Synaptics.com/en/drivers.php 

  Kind regards.

• Computer laptop 15-f211wm Mod #L0T32UA: USB external HARD disk and laptops not detected but used to be

  My USB ports do not seem to work properly.  I used to be able to plug in my external hard drive and mobile phone to transfer files, but now I can't.  In the DEVICE MANAGER of the laptop, nothing seems to be wrong, no red or yellow warning.  However, the USB ports DO not seem to power the devices, my cell phone goes into charge mode and my HDD Seagate you can feel it vibrate slightly.  There are two USB ports on the left side and one on the right, and all three can not detect devices.  Help, please.

  HERE IS a GUIDEto solving the problems of USB such as described in the post.  See if any of these help.  As you have posted in the notebook section, when you do that a single step to cripple, also remove the battery after the computer shuts down, unplug charger, too.  Then hold the power button for at least 30 seconds before feeding back.

  BTW: have you tried to delete all things under the rubric of the USB in the Device Manager, then reboot to allow Windows to reinstall the USB ports?

• Update the drivers of USB Port on the laptop Acer Aspire 4741 x 64 with Intel Core i5

  One of my USB ports does not work. When I check in the Device Manager is saying "no drivers installed for this device. If I click on the update drivers option it tells me that Windows has detected that the best drivers for the device are installed. But when I check the Device Manager it says still no driver installed for the device. I even downloaded and installed the drivers from www.acer.co.za but its not working. What could be the problem?

  See this: Tips for solving common driver problems

• cover for USB port on most Clip

  Anyone know if there are covers or taken from there for the type of usb port to which the Clip is?  Because this drive is so new in the production, there is AFAIK, being only an owner for less than 24 hours from now, there is no cause for the longer clip...

  LOL, I found a site for a store in texas that has them...

  http://www.BestByte.NET/merchant/merchant.MVC?screen=prod&Store_Code=BB&Product_Code=CBUS01CAPM&Category_Code=

  I ordered 5 of them and 5 USB normal ones so I can hide some unused ports on my computers...

  but good it will make me now, I have to return my sanza again at the store... since I have owned it in the last 24 hours, it was mysteriously restarted twice and now closed immediately and is not return back.

  Update: after fiddleing with the buttons for an hour and a half, the player starts again after holding the power button for a minute...

  thoughts on why my drive is upward?

• RV320 where is finding a NSD pass for USB Ports

  Hello

  I have a RV 320 FW: 1.1.1.1.19 I try to bring a USB Dongle to work on USB1.

  In failover USB settings I can change the settings for 3g / 4g primary Mode off and save it.

  But now when I want to change to another mode like failover/hot or cold / failover or primary router reports an error

  what it says: Please enable NSD to USB Port... but I can't find a switch for the NSD on USB in the Menu of the router.

  Anyone know where to find?

  Thank you

  Hello

  I see that you have opened a ticket with support of this, so I'll give you the answer to the public.

  To avoid seeing this message, WAN1 network service detection both WAN2 must be verified. There is no NSD for the USB port. I see that the message is misleading, pointing to the USB interface. It is intended to be fixed in the future.

  Thank you

  Bismuth

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• My computer does not detect plutins on USB ports

  I have Sony Computer os is XP and he simply stopped Plug detection in the Traverles data and external hard drives on the USB port.

  Does anyone know how to get it back?

  Sony uses intel & AMD components, so intel based, go to

  Intel.com, Software/drivers, locate the chipset installation media

  software/driver, youre chipset, or let intel scan utility pc chk

  for installations (it works on any pc intel based).

  Youre another option, try to connect the equipment to an another USB

  port.

  Also, open the observer of events to see what says the operating system, warnings or errors that

  are displayed, R.click on one, select 'Properties', read the news...

• Cannot run Mercury Marine computer diagnosis System (CDS) via the usb port.

  Original title: trying to run mercury marine diagnosctics system cds via usb port, will not initialize port. I have tried 4 different ports, usb drivers for this system are installed. using windows 7 ultimate

  Windows 7 ultimate installed just to run the version of system.have Fig. 9 CD Mercury system with new SPX usb to serial port adapter 9 cable pins. cannot talk to engine-serial port initialization - error

  Hello

  I suggest you speak with the Mercury Marine computer diagnosis System (CDS) press using the link below.

  https://mercurymarinecds.SPX.com/contact.aspx

  Hope this information is useful.

• I have aspire computer desktop M3920 and all my USB ports at the front do not work any more :(HELP

  OK, so all the USB ports worked very well, but a yellow exclamation appeared recently on ( ) Intel (r) 6 Series/C200 Series Chipset Family controller USB - 1 26 improved host) in the Device Manager, and my PC has no pop up any USB device I plug, so I uninstalled to reinstall it to try to solve the problem. but now I'm stuck and couldn't get them to work again

  Any help or info would be appreciated.

  I could try to reinstall the driver from the Chipset for the M3920 see if that helps. Link to the driver

  After that it gets a little tricky and I must recommend that you backup your data and do a recovery.

  Thank you
  Cory

• I have a printer HP (part of the package with the computer) which will connect via the USB port is no longer in my office. He has worked previously so, any ideas on how I can get it to work again?

  While I do not know there have been changes to the system (updates and so on), I don't know what modifications have been made or that one; If any, may be the cause of the problem. Compound that with, I can't get back far enough to get to the last time that I used this printer with this computer and it is a puzzle all around.

  Let me know what additional information as appropriate, you need, maybe the way to collect (if it is not something that I already know how to do) and we'll see if we can get these papers start college again.
  System: HP p6604y Windows 7 Home Premium 64-bit
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz
  6,00 GB (5.75 GB usable) memory
  The printer is HP Deskjet 3000 J310.

  Hi Michael,

  1. What is the error you get all trying to connect to the printer?

  2. the printer works properly when connected to another computer?

  3 is. the computer able to recognize any other usb device?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Additional information.

  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-us/windows7/install-a-printer

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• 2d28ca: computer laptop hp 2000 drivers

  looking for drivers for the network controller (1) Please next, pci (2), (3) thank you sm bus controller device

  Hello:

  First install the amd chipset drivers and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123851-1&cc=us&DLC=en&LC=en&OS=4063&product=5388155&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127099-1&cc=us&DLC=en&LC=en&OS=4063&product=5275376&sw_lang=

• Computer laptop PC HP, 15-g029wm: usb and wireless drivers missing

  Missing drivers after installing windows 7. Here are the missing drivers highlighted:

  1. network controller

  2. PCI device

  3. SM Bus controller

  4 universal Serial Bus (USB) controller

  I really need your help.

  SDG.

  Hello

  Please try to scan now from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 6761882 #N7940

  Kind regards.

• Computer won't reboot via a USB port. I need help

  I downloaded a program on a USB flash drive.  It works on another computer but will not draw the program on mine. Windows 7 64-bit.  I changed the BIOS to USB boot priority #1.  Can someone help me understand what Miss me?  Do I need to install a different driver? Activate something.  It goes to a blank screen with flashing cursor but no prompt.

  Start the PC, enter the bios, set it to fail safe defaults, save, exit and restart

  The boot priority will not help.

  How did you actually copied this program on usb, where?

  In fact, what happens when you run the installation of unfamiliar programs?