Drivers of restoreing.

Similar Questions

• Re: Questino on the system Windows Vista drivers and restore

  Configuration: vista sp1-norton internet security2007 Vista premium edition.

  Yesterday I tried to update my drivers realtek as recommended by Toshiba notificaions.

  Using Add and remove, he stated that there was a problem, but then on board, but they seem to be always installed, I checked etc Device Manager and I still have sound.
  But there is now no record in Add or remove any listing of the realtek driver high definition.
  For this I tried to use system sort restoration he goes through the motions, but he said then was unable to complete because of an error?
  I disabled norton in the commissioning and config system etc, but this still does not work I even disabled everyting in the start, but it still does not.

  I'm happy to let the driver as they were, but I'm worried not being do not add delete my main concern is that system restore does not work thanks for any help.

  Garbí

  Hi Mick

  You ad is a bit confusing to me

  You ve removed the Realtek driver, but you cannot install a new. Am I wrong?

  First of all, you must clean your registry using CCLeaner free software.

  Then go to Device Manager and remove the sound card system devices and PCI devices high definition.

  Reboot the laptop.
  After the initialization of the short Vista should find a new device (sound card) and ask the driver installation.

  I think this should help because it has helped me too...

  Good bye

• computer stuck on screen-light windows mobile bars but is not anywhere - safe mode feezes when loading drivers-system restore did not work

  Dell ionsipion 1525-VISTA OS - computer when asking to start the normallyor launch startup repair... .errors will not fix, go to the windows... page only the microsoft corporation and bar shows - lights on the bars are moving.  If I hit f8 and try to start in safe mode-sfe mode freezes while it loads the drivers - if I try the system restore, it says I have a corupt file and when I run disc chk it says all files are OK but then it asks me for another disc that i have not... any ideas

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And it means Dell back to factory settings if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• I replaced the hard drive in my wifes dv6.where can I find the factory drivers to restore his laptop

  It is a DV6-2157wm running windows 7 32 bit. We do not have the drive to restore the computer, and did not create one before you take out the hard drive.

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Drivers for modem LSI HDA for Compaq CQ61-411WM

  Hi everyone, I recently bought a CQ61-411WM laptop.  I loaded Windows 7 Ultimate 64 bit on the laptop, even though I know that HP does not support the Ultimate, just the version version Home premium to Windows 7.  When I did this upgrade to Ultimate, I lost the modem, and I still can't get it to work.

  None of the modem Agere/LSI of HP drivers work on this system/modem.  So, I ordered the HP restore disc and guess what?  You heard me right.  The modem has not been installed.  And the recovery discs are supposed to contain all drivers.  Well it did not contain the modem drivers, but they obviously did not work, because it was not installed when you have completed the recovery.

  I extracted the modem drivers on restoration with 7-Zip drive, which can read at the BASE. WIM file and all other files on the recovery disks.  It did not work.  I am at a loss here.  I have high speed internet, but I have this modem operational, because I use this computer for work, and when I lose my ADSL connection, the modem is my backup.

  HP seems to be of no help either.  I also tried sp45229.exe, and it DOES NOT WORK.  Here's the code provider, device id and the id of subsystem for the modem on my computer... Vendor ID is the device ID 1 11 is 1040 and the subsystem ID is 103C363F.  In addition, number 363 is the model of system/motherboard.  I heard that the subsystem ID does not correspond to the. File INF of the software accompanying modem, it does not install or is not installed correctly. I looked in the. LSI software INF file, and there is no id corresponding to this system/modem in the HP Softpaq SP45229.exe subsystem

  There is NOTHING anywhere for this modem.  HP needs to get off their duffs and DEVELOP a DRIVER for this modem on this computer model.  There is no excuse as to why I would not be able to re - install the modem under Windows 7 Ultimate instead of having to comply with the home edition of Windows 7 Premium sucky.  I develop software, but I don't have the time to deal with Scripture, the drivers and all.  I have other things to worry about.

  Here is the entry for this modem device manager: HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_103C363F

  Maybe this is why I'm having no luck.  Also, I should note, that the Manager of devices and Windows 7 operating system as a whole IS NOT AUTOSCAN for HDA modems.  You MUST have the RIGHT driver for the installed do or there are no go!  Nothing found for it on Windows Update either.  So, I am S-O-L or what?  Please advise me on this situation.

  I'm sorry for everyone is a moment that I lost.  It turns out that my card in this computer modem is burned up.  I found one for the computer, but it is a map of modem Agere Delphi D40 AM5.  I think that the current excessive loop on the phone line or a storm came out the modem.  So I'll reduce the loop current voice, and I'll keep unplugged so that a storm happens.  I'm surprised it didn't get out the computer.  I'm lucky!

  Now, to get the modem and download the drivers installed, it should detect it immediately.  It does not detect a modem blown well! Laughing out loud

• Laptop went nuts, no internet/pointer moves by itself, sys restore won't work, etc.

  Windows Vista Ultimate, HP Compaq laptop.  Everything went well and looks like someone's gone and trashed it, nothing works.

  Hello

  Here is information on reinstallation of HP and also check the State of the PC and installed files, etc.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• I want to restore my hp desktop computer that is running windows vista edition Home premium

  I want to restore my hp desktop computer that is running windows vista edition Home premium, but I don't have the cd and when I try it files through the windows there not a correct restore date.  can someone help me?

  Hello

  You're confused system recovery and system restore.

  System Restore makes the settings from your computer to an earlier date; It will not reinstall the operating system.

  System recovery reinstalls the operating system how much you bought your machine; as for the new State.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  You can reinstall by the HP Recovery Manager if your computer is still running or by pressing F11 at startup.

  You can also make your own recovery discs.

  All these information are the included HP link.

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• Impossible to uninstall the drivers of MCIR keyboard permanently

  The following keyboard drivers seem to block several keys, including the colon and backslash in DirectX 10 and other applications:
  Microsoft eHome Remote control keyboard
  Keyboard MCIR Microsoft eHome
  Keyboard 109 MCIR Microsoft eHome
  HID keyboard device

  When I uninstall these drivers, stuck key are allowed again. However when I restart (or unhibernate) my computer, the drivers are restored.
  How can I permanently delete these drivers?

  Hello green3q,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  You have visited the site of keyboard manufacturers to see if there where the drivers current?

  Try logging in safe mode and uninstall from there.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LX195 MediaSmart Server: How to uninstall Home Server?

  Greetings,

  I tried to ask in the forum Microsoft.

  I'm trying to uninstall Windows Home Server. I have already uninstall the connector and software, however, I just noticed a 20 GB on my laptop partition (drive D called "RECOVERY".) It contains a folder named "Windows Home Server drivers for restoring" and a readme.txt file. How can I delete the partition?

  Thank you

  Shane.

  HP MediaSmart Server LX195

  Windows Home Server Power Pack 3

  Windows 7:

  Click the Windows 'Start' button.

  Right - mouse button click on 'computer '.

  Choose 'manage '.

  Double click on "storage".

  Double-click on "disk management".

  Click on the partition to select.

  Click on delete.

  If the new 'free space' is at the end of the "C:" partition, use:

  Directory of C:\Windows\System32

  20/11/2010 06:24 166 400 diskpart.exe

  'Add' the 'C:' partition in order to integrate the 20 GB partition "C:".

• Graphic/video card [REPLACEMENT / UPGRADE] on the desktop HP Pavilion - help

  I have the following:

  Desktop HP Pavilion Elite m9152p

  Upgrade to Windows 7 Professional 64-bit (updated 11/2009)

  The video card seems to have gone out and tried the following:

  Operating system reinstallation

  Uninstalled & drivers Reinstalled & restoration

  Before attempts above, no changes had been made to software or hardware only led to the same result: the video seems to be fine, and then it crashes and hangs and doesn't eventually having a hard reboot how, the computer loads the integrated video/graphic card.

  I need to buy a replacement video/graphics card, but I'm not sure what card I need to be aware of, or that my computer can handle as a replacement and maybe a possible upgrade (not necessary) - any help in this regard would be most appreciated.

  Thank you!

  I think it's a good choice.

  The comments seem positive most of the time that the fan seems to be quiet.

  I don't know if your previous card had HDMI.

  When you install your new video card, it can disable your sound system because of the HDMI audio chip on the video card.

  If you do not lose your integrated audio system, after you install the video drivers, reboot the machine, go into BIOS, find the onboard audio setting. It can be set to Auto or disabled. Change the setting to "Enabled". Save the configuration when you have made the change and again when you exit the BIOS.

  Upon restart, you will have your on-board audio back.

  Impatience back on your part.

  Paul

• Some keys do not work properly on the keyboard, Portege S100

  I have problems with the keyboard on my S100. The s, d, g, j, q, and a few punctuation signs does not at all. I had problems with them before that have set themselves pretty quickly, but now it appears 'permanent '.

  A USB keyboard works very well. I also replaced the keyboard with a brand new and that has not changed the situation at all.

  I do believe that it is a software problem I tried to reinstall the drivers and restore system several times employee.

  Any help to resolve this issue would be appreciated :)

  Dan.

  Hello Dan

  I presume that there is problem with keyboard controller. I recommend you contact the customer Service of your country partner. They can blink and it should work properly again.

• Qosmio F60 - 111 - giving speaker static

  Hello

  I got my qosmio a month ago and 2 weeks in I installed the updates that the bulletin board toshiba told me. I then started to mix static on the left and right speakers.

  Two sound drivers I have installed the toshiba site (which are the same drivers toshiba bulletin board told me) are:

  1 - realtek high definition audio driver - 6.0.1.6062
  2 - nvidia high definition audio driver - 1.00.00.59

  After that go threw etc etc Device Manager and driver toshiba download page and after research threw all the forums I decided that it was a software problem that I could not find that I did a system restore. When the system was released in its original state I started having static again about a week (I don't know if its still a software makes it maybe something I have installed. I could have installed that some software again after I made my system recovery, I'm not sure). I downloaded drivermax, who told me that my sound card drivers are outdated so I installed the latest drivers.

  1 - realtek high definition audio driver - 6.0.1.6257
  high definition 2-nvidia - 1.1.13.0 audio player

  Even static once was mixed at times. That's what drivermax was showingme.

  http://www.DriverMax.com/driver/drivers.php?computer_id=WR7V6K17D7CIF4OC0TYT88W7IP 783K & iduser = 1693461

  However, after installing random different audio drivers (realtek and nvidia) to drivermax, I had sound work in the right speaker. The left speaker gives a lot of static (I went to the sound in Control Panel - properties - and did a test under the Advanced tab bar. There is this high-pitched noise from the speaker of lelft). I don't want to perform a system recovery again once I have just to many files on my drive hard right now even be embarrassed distance to save them again.

  How to restore audio drivers to their original state (i.e. before 6.0.1.6062 and 1.00.00.59). Once the audio drivers are restored if we remain static, that would mean probably this is a software problem and I will then do a system recovery. If ago only static left speaker after recovery should I assume that this is just a hardware problem?

  THX :)

  Wait a moment please, your ad is somehow a little confused...

  When you retrieve your laptop to factory preinstalled drivers with tools, you have the same behavior or not?
  After the installation of recovery, you need to check if the automatic driver updates are disabled (Windows Update) and updated TEMPRO for example not necessary.

  But when you install the driver of his most recent of the Toshiba page, you have this static noise on external speakers too or is it just related to internal speakers?

• HP Pavilion 15-ab270sa: need help all of a sudden my phone displays "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  Toay the morning, I was working in my laptop suddenly it stuck and aftersometimes it lights up with a blue screen and there are some practical information written as "Error DRIVER_IRQL_NOT_LESS_OR_EQUAL" and there are also "0x000000D1" error code

  Please help me, how fix this mistake without formatting?

  A 0x000000d1 error occurs when one of the drivers that you have installed on your computer is damaged or behave in an unstable manner. To resolve this problem, you can restore your drivers, update your drivers or restore your system to the last known good configuration. If you have recently installed the new drivers and new software, plug-and-play, it is very likely that errors that you see are for this reason.

  Update your drivers:

  If you know what drivers you have not successfully updated for awhile, then the first step you should take is to update the drivers. A newer version of a driver is less likely to suffer from the instability of the system issues the way a former pilot might. Update your drivers generally is to go to the website of the product. If you have recently installed a new NVIDIA graphics card, for example, you go to the NVIDIA website and search for the article of their driver. To update your drivers with success, you will need to know the exact material or accessory model you have recently installed and the operating system you are using.

  1. go on the manufacturer's website.

  2. Locate the Drivers section.

  3. Select your operating system.

  4. Select the model of your equipment.

  5. download and install.

  Restore your drivers:

  If the update of your drivers does not help, you may need to go in the opposite direction. If the material or accessory item that causes this problem is something that you have used for a while, it may be that the latest drivers are the cause of the problem. This is often true if you use an older operating system, such as Windows XP or Windows Vista. When you cancel a driver you will be rolling it back to an earlier version that you had used successfully in the past.

  1. click on the Start button and navigate to the control panel.

  2. open the equipment and audio.

  3. open the Device Manager.

  4. right click on the device there.

  5. Select Properties.

  6. click on the driver tab.

  7. click on Driver Rollback.

  8 follow the instructions.

  Drivers for most corrupt file names:

  athw8x.sys - Atheros Wireless LAN Driver

  Igdkmd64.sys - Intel Graphics driver

  Tcpip.SYS - Microsoft TCP/IP Driver (associated with network management)

  Netio.Sys - network IO subsystem

  Usbuhci.sys - Miniport USB UHCI driver

  iaStor.sys - Intel storage drivers

  rtwlane.sys - Realtek PCIEWireless LAN PCI-E NIC driver

  If you are unsure which model of the component you have installed, you can usually find by accessing the Device Manager. If you are still unsure, it usually appears on the spec sheet provided by the manufacturer of your computer.

  Source: https://techyuga.com/0x000000d1-error/

• Qosmio F50 - Webcam Error - Invalid floating point operation

  Hello

  I have a Qosmio F50 (4 weeks) problem is after two weeks webcam stopped working * not valid floating point operation *.
  I have to close the program via the Task Manager, * software camera Wizard does not *.

  Have you tried next.
  Update all drivers, System Restore

  Toshiba help line after all the efforts suggest all reinstall them it is aggressive for me, because he would lose some software on the laptop that I had to transfer old PCs and had to plead with some software companies to transfer (as a single license etc.).

  If someone else has had this problem and is there a simple solution

  Will be

  Hmm, you could remove the software of the webcam of the system and could remove too the webcam from the Device Manager.
  Then you could clean the operating system using the CCLeaner

  This software is free and it can clean the registry and the system. I use it very often.
  Then restart the laptop and try to reinstall the software of webcam again.

  Good luck

• Audio problem in Satellite A100

  Hello
  I am using a Satellite A100 and used UBUNTU in there.
  I have now installed XP and I cannot restore my audio.
  Here are a few things I tried
  1 Installing and uninstalling drivers
  2 restore and update drivers
  3 check that the service windows audio is

  The message I get in the Properties window is that "device cannot start".

  Kindly help. I am unable to work without audio.

  P.S.All used drivers have been downloaded from the site Web of Toshiba only for Xp

  Hello!

  Satellite A105 is the same as A100 but it s for the American market.

  I put t know what sound chip you have, but have you checked the sound settings in the sound card software?
  Alternatively, you can disable/enable the sound with FN + ESC

  Good bye