Laptop went nuts, no internet/pointer moves by itself, sys restore won't work, etc.

Similar Questions

• HP mini 210-4000cto: Synaptics Touchpad pointer moves by itself

  My Touchpad erre - moves by itself

  I tested when it does. Sometimes his random

  Sometimes sound when I have something to make a passing series - all in motion right hand upward on the touchpad and then stop + click on the left button - the pointer goes to the top of the screen itself. Sometimes going down then stop-click left finger that she continues down. This happens sometimes on the icons that I try to click or try to grab things or move things.

  Sometimes I use two hands (fingers) together - I can touch the touchpad with the finger right hand add finger of the left hand on the left click button - depends on what the direction upwards or downwards it will continue upwards or downwards by its self.

  If I use one hand to do - move to where I need, then click on, no problem

  I found the most recent driver for the Touchpad to Synaptics but that did not solve the problem

  I found sp70198 HP (32-bit) Jan - 1-2015

  I installed using C:\swsetup\sp70198

  He wrote "Solves a problem with the function of movement of momentum where tapping the device does not stop the movement of mouse cursor after that the mouse cursor movement is started."

  Wow its much faster.  After the installation of sp70198 the computer is no longer usable - long script on the page stopped errors - I get faster use of the page and also to go to a page or one place to another.

• Internet connection Windows xp missing device manager local of system restore won't work

  I have a toshiba 2405-s201 laptop that was running sp2, I tried to download sp3 after awhile, he stated that he could not install. now, my local internet is missing device manager is empty system restore will not work, I did a complete search of the file and he saw there. I tried to go to add/remove and said he could not be found. How can I fix it? Oh Yes by the way I am not very computer

  Hello

  You can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your computer. Thereafter, follow these methods & check if the problem persists.

  Reference: How to replace Microsoft or hardware, packs software service to order and replace product manuals?

  Hope the helps of information.

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• My laptop is down the internet connection several times daily.

  Internet connection

  My laptop is down the internet connection several times daily. I can usually restore the connection to solve the problem. It restores the connection for a while but always says the same thing. «A network cable connected correctly isnot or can be broken and also problem with wireless adapter access point.» I live with 3 other people and we all use the same router and they have no problems.

  Also, my computer has some weird pink points at the top of the home screen. So sometimes when I pull up to early or a photo or something there are pink lines on the photos. No idea why this is happening and how to fix it?

  I discovered that I had the same problem of the abandonment of the Internet with HP envy. I went on the Intel site and found that they had a fix for the problem I do not know the wireless card you have that I go to your site of NIC and check and see if they have a patch for your network card. After I installed the patch for my NIC my problem disappeared. HP sent me an email with the appropriate also fix.

• Far pointer movements makes it difficult to change or enter data

  Pointer moves frequently back or away from during data entry

  using a laptop or desktop?

  mouse wireless or wired?

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Re: Tecra M5 - mouse pointer move only

  Hello

  With many Tecra M5, we regularly have a crazy mouse problem. I explain: the mouse pointer move only as a ghost and go at the top of the screen. In this case, it is impossible to control the pointer with Touch Pad but I can't with the AccuPoint (with difficulty because the pointer still want to go on top). The Touch Pad Driver is version 6.0.304.6, the [last | http://fr.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2ftpdrv-20081007153100.zip |] Download here] and Windows XP SP3 (same problem with SP2).

  For now, they're just one solution, 3-4 tap on the touchpad to unlock and pointer control but when problem come every 15 minutes of use, it is bad. It looks like a software problem, but anyone know if a patch available?

  Thanks for all answer to ;-)

  The problem when you disable touchpad/accupoint and use an external mouse?

• My HP Pavilion dv9720Ous laptop cannot connect to internet

  I installed a new Buffalo-G-CBOA router for home. My HP Pavilion dv9720Ous laptop connects to the router, but the HP laptop cannot connect to internet. Is there something that needs happeon on the PC to connect to the internet? Thank you

  How are you communicating on this forum?

  I suppose that from another PC, correct?

  Download you the driver on the PC that you are using, and you glitches the file on a CD, or copy on a USB key.

  You transfer the driver file that you copied to a flash drive or a CD into the computer that needs the update of the driver, then run.

• BlackBerry smartphone how to use my Verizon Storm 9530 with my laptop to connect to Internet?

  I have a Verizon Storm 9530 and subscribe to the $30 data plan that allows me to connect to the Internet from the device.  I also read that the device can also be used as a modem with a laptop to connect to Internet.  I don't understand this.  How does this work?  Is the work of mobile phone as a dial-up modem?  Or just connect my ISP (Time Warner Cable)?  I use a connection broadband at home, but it does not help when I am away from my home.

  Can someone please explain how to use the 9530 with my Dell Notebook PC to connect to the Internet?

  How does it work?

  What hardware do I need?

  What software do I need?

  How do I put in place?

  Do I need to purchase any additional VZN service?

  Do I need VZ access?

  Please explain in detail.  Thank you.

  melburstein wrote:

  I have a Verizon Storm 9530 and subscribe to the $30 data plan that allows me to connect to the Internet from the device.  I also read that the device can also be used as a modem with a laptop to connect to Internet.  I don't understand this.  How does this work?  Is the work of mobile phone as a dial-up modem?  Or just connect my ISP (Time Warner Cable)?  I use a connection broadband at home, but it does not help when I am away from my home.

  Can someone please explain how to use the 9530 with my Dell Notebook PC to connect to the Internet?

  How does it work?

  What hardware do I need?

  What software do I need?

  How do I put in place?

  Do I need to purchase any additional VZN service?

  Do I need VZ access?

  Please explain in detail.  Thank you.

  1 attach. you your storm to the computer via usb.

  2. a computer, your usb cable and the storm

  3. you need to download vz access manager from verizon

  4. install vz access, connect the storm and on net

  5. Yes, its about $30 extra for tethering

  6. Yes, see #3

• I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict.

  I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict, why? & How can I fix this problem, thanks Aldo Zapata

  An IP address conflict occurs when two computers on a LAN (local area network) or the Internet were assigned to the same IP. IP conflicts between two computers normally make one or unusable both for network operations.

  Try below methods

  1. for networks where the addresses are fixed (statically assigned) IP, ensure that each local host is configured with a unique IP address.

  2. If your computer has an address assigned dynamically, releasing and renew its IP address can bypass IP address conflicts.

  Run the following commands in the command prompt:

  ipconfig/release

  ipconfig / renew

• laptop is slow at the point of being unusable

  In short, my Dell Latitude E4310 laptop is slow at the point of being unusable. I am also unable to keep the Windows Defender service runs.

  Last week I got a screen blue error (code c000021a), probably as a result of an update Windows misapplied. I was able to go back to a previous instance of Windows and apply the patches successfully.

  Here is what I checked / done (not necessarily in that order).

  • My BIOS is the most recent (A11) and BIOS diagnostics to come clean.
  • Several analyses of virus & malware in safe mode came up clean.
  • No problem in Windows Startup Repair.
  • I ran a clean boot without result
    The plan of power seems normal and I uninsalled (temporarily) all anti-virus & malware programs.
  • I ran disk cleanup and defragged the hard drive
  • System, advanced, performance, is assigned to the properties 'adjust for best performance ".
  • My performance index Windows scores range from 6.9 (processor) to 4.1 (graphics).
  • Running a Windows system health report returns nothing.
  • CHKDSK (right click on c:, properties, tools, error checking) did find and fix HARD drive errors. I would fix the CHKDSK and WININIT, newspapers but must be either in my or Admininstrator event logs.
  • I ran SFC. EXE, three times, and each time check fails, then only reach 10%, indicating the following: "Windows Resource Protection could not perform the requested operation."

  The journal of SFC seems normal except for the following: 2012-09-07 22:30:28, Info CSI 00000023 [SR] could not check component of b10e9bd0c69db5027b503ea3749c28f3 files, Version = 6.1.7600.16820, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, neutral, TypeName neutral, clear PublicKey is damaged (FALSE). I can't find a file or folder anywhwere on my system called "b10e9bd0c69db5027b503ea3749c28f3".

  Another forum suggested a clean installation of the factory OEM of Windows.  I would like confirmation or other ideas, because that doesn't seem to be a trivial process.

  Thank you.  -Mark

  Create/use the bootable utility check disk provided by your manufacturer of HD.

  Also free www.memtest.org bootable, run for at least 1 hour or xx passes

• Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

  Hello!

  I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

  "Windows Movie Maker has stopped working".

  There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

  I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

  Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

  I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

  I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

  Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_6f96
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0378415b
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6f96
  More information 2: 39ee662180b2f2ed5cfc67e5914ae855
  Information additional 3:6366
  Additional information 4: 8328a225406b340b1b7b5f591aa5688c

  Additional information about the problem
  Bucket ID: 1197617492

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: APPCRASH
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_1703
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 032e41a4
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 1:1703
  More information 2: 2264db07e74365624c50317d7b856ae9
  Information additional 3:1344
  Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

  Additional information about the problem
  Bucket ID: 1909412930

  -----------------------------------------------------------------

  The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

  Thank you!

  Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Have you tested another user even if you need to create one to do this?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

  How to identify unsigned with sigverif utility in Windows Vista drivers
  http://www.WinVistaClub.com/F34.html

  Vista Movie Maker DEP Fix
  http://www.YouTube.com/watch?v=tkpURM4FFt0

  In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

  There are a few suggestions that Nero is a problem if you run that at all?

  Windows Movie Maker has stopped working
  http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

  If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• How can I get my laptop in safe mode so I can use the system restore

  Could make Microsoft scanning and cleaning of the laptop. Now I can get on the internet, but all the files, photos etc do not appear. I arrived at the system restore, but it won't work. Want to try to restore in safe mode as suggested, but how do it in safe mode?

  Could make Microsoft scanning and cleaning of the laptop. Now I can get on the internet, but all the files, photos etc do not appear. I arrived at the system restore, but it won't work. Want to try to restore in safe mode as suggested, but how do it in safe mode?

  Safe mode is not likely to help, and system restore.

  Your user profile is probably damaged and that Windows has created a new profile for you.  If you are looking into 'My Documents' or 'My images', your old files won't be there - they are in the old profile.  Do a search for your files.  If you find them, you can copy the entire profile.  See http://support.microsoft.com/kb/811151

  Or you can simply copy the desired specific files/folders.  You may need to 'own' the files to gain access to their--> http://support.microsoft.com/kb/308421

• With recent updates, restoring with restore points is more and now IE does not work properly.

  I just had a few security updates for my machine and now there is no restore points, restore reports again that restore points are invalid, try another date of restoration (I'm guessing on this one).  Internet Explore ceased operation (for denial of service in IE error messages).  Norton finds nothing.  Any suggestions?  P.S. I don't browse the internet, check e-mail, or any other activity on this machine and only play an internet game on it.  Any suggestions or helpful hints before moving a complete system recovery disc?

  You used the word "n" and system restore in the same paragraph.  It's a good sign for boredom.

  Here are a few known issues in SR and Norton, you can read and see if they will work for you.  It is possible that your SR will never work unless you reinstall the system restore (not XP - just the system restore part) which would mean you would lose all your old PHI from scratch with new RPs.

  I can't help you with your IE, but if you provide the following information, maybe someone else can.

  SR already worked successfully for you in the past?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your version of Internet Explorer?

  You have a different browser like Firefox or Chrome that operate and is only IE afflicted?

  See if IE will work if you click on start, programs, accessories, System Tools, Internet Explorer (No Add-ons).

  What is the exact error that you see when you try to use IE?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.

  I would like to deal with the problem as if there was no such thing as the system restore, fix your other questions, stabilizes, then get your SR works after that.  Certainly, it should work well, but I wouldn't count on it as a way to solve problems.