Re: Questino on the system Windows Vista drivers and restore

Configuration: vista sp1-norton internet security2007 Vista premium edition.

Yesterday I tried to update my drivers realtek as recommended by Toshiba notificaions.

Using Add and remove, he stated that there was a problem, but then on board, but they seem to be always installed, I checked etc Device Manager and I still have sound.
But there is now no record in Add or remove any listing of the realtek driver high definition.
For this I tried to use system sort restoration he goes through the motions, but he said then was unable to complete because of an error?
I disabled norton in the commissioning and config system etc, but this still does not work I even disabled everyting in the start, but it still does not.

I'm happy to let the driver as they were, but I'm worried not being do not add delete my main concern is that system restore does not work thanks for any help.

Garbí

Hi Mick

You ad is a bit confusing to me

You ve removed the Realtek driver, but you cannot install a new. Am I wrong?

First of all, you must clean your registry using CCLeaner free software.

Then go to Device Manager and remove the sound card system devices and PCI devices high definition.

Reboot the laptop.
After the initialization of the short Vista should find a new device (sound card) and ask the driver installation.

I think this should help because it has helped me too...

Good bye

Tags: Toshiba

Similar Questions

  • Windows Vista backup and restore: no path to write the disc label

    Original title: Back-up-Windows Vista

    Automatic backup on windows vista provides a label to write on the dvd in the external disk drive. There is no pop-up window to indicate where to write that the label - so fails it AutoSave.

    When I insert a blank DVD RW in the drive E back-up indicates firstly that there is no disc in drive E. When I insert this disc a second time, that a pop-up window indicates that I have to label this disk as shown above, but there is no path [local] who then shows how to label this disc.

    Brucebkb123,

    I would, if I were you, save all the time and the aggravation of the use of DVDs for backup of files.
    Go to a RELIABLE computer store (not Best Buy), ask for an EXTERNAL hard drive for backup of files. Not the 'E' drive that you said. This isn't an external hard drive.
    Today, a drive Ext. hard can easily be done for less than $100. It is well worth, instead of pulling your hair.

    Make sure what you say "external hard drive for backing up files.

    t-4-2

  • Problems of restoring a backup of Windows Vista backup and restore program

    I recently had to completely reinstall Windows XP, then the Vista upgrade, to fix a problem with updates of Microsoft.NET and ATI graphic driver.  In may, I made a full backup of my laptop using Vista resident backup and restore program, using an external hard drive to store the backup.  When I learned that I had to reinstall the operating system, I did another backup in August (but not complete) using the same program.  Just after this backup in August, I did the reinstallation of operating systems, with the help of the phone of Dell.  My original problems are solved.

    When I was ready to use the restore the Vista program, I had to choose among the two sets of data (May to August) about which I wanted to restore on my laptop.  I chose August, thinking that it would be later.  However, in Outlook, all my saved e-mail messages are gone, I have no e-mail address book and any current calendar entries.  These are the only things I noticed up to this and are not, but I have not checked all the files... they are large enough.

    The folder on my laptop which normally contains my Outlook data files shows only a file Archive and the very small current .pst data file for 7 messages in my Inbox.

    It seems that the backup of August was important to may backup and maybe most of my Outlook data are in the may backup.  How to get data from two backups in my laptop?  When the backup is a folder with the same name, you have the opportunity to write about it, not copy, or copy it and have 2 folders.

    I tried to copy all the data from the external hard drive in the folder of Outlook data on my laptop.  It will eventually be several files, and Outlook reads only the more recent, so I don't always get access to the data that I hope is here!

    Can someone please?  My life is in my calendar, I lost years of e-mail addresses, and much saved messages that contain important data.  Thank you!

    Hello

    You must import the Outlook.pst files from backups in your current Outlook. Copy your gift
    Outlook.pst file somewhere else as a backup incase you made a mistake. If necessary you can IMPORT
    New in Outlook. If you import all your old Outlook.pst files into your new perspective you should have the
    total sum of all. Import e-mail messages, and then click contacts.

    How to migrate to Outlook 2007 and Windows Vista
    http://www.vista4beginners.com/migrate-to-Outlook-2007-and-Windows-Vista

    More help here Discussions and focus groups:

    Discussions of Questions General Outlook
    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

    Microsoft.public.office.setup discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?GUID=1A61081E-1F66-5F7F-B5BA-04767E55A63B

    -----------------------------------------------
    Some tips on the Outlook backup, you can use. Also save the Outlook.PST file occasionally by copying
    He's somewhere else.

    Back up Outlook data with the tool backup Microsoft Outlook personal folders
    http://Office.Microsoft.com/en-us/help/HA100758021033.aspx

    With the help of the tool backup Microsoft Outlook personal folders
    http://Office.Microsoft.com/en-us/Outlook/HA010875321033.aspx

    Outlook 2007/2003/2002-in Add-in: Personal Folders Backup
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=8B081F3A-B7D0-4B16-B8AF-5A6322F4FD01&displaylang=en
    Rob - bicycle - Mark Twain said it is good.

  • Firewall: can I have the firewall of windows vista premium and the norton 360 firewall will at the same time?

    can I have the premium windows vista firewall and Norton 360 firewall will at the same time?

    Not recommended.

    Two firewalls running may cause conflicts.

    Choose one or the other.

    See you soon.

    Mick Murphy - Microsoft partner

  • I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure?

    * Original title: upgrade

    I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?

    Thank you

    Jim

    Hello

    Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

    There is no free upgrade Vista to 7, 8.1, or 10.

    Follow these steps before you buy Windows 7.

    Microsoft sells more than 7; Try Amazon.com.

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    @@@@@@@@@@@@@@@@@@@@@@@@

    Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

    Microsoft sells more than 8/8.1.

    Try Amazon.com, etc.

    Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

    If this is not available, Windows 8.1 not install and work properly for you.

    There is a lot of information in this first link from Microsoft:

    Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

    "Update to Windows 8.1: FAQ".

    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

    "8.1 for Windows system requirements.

    http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

    @@@@@@@@@@@@@@@@@@@@@@@

    How to buy Windows 10:

    http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

    But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

    https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

    " System requirements Windows 10"

    https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

    Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

    "FAQ Windows 10.

    http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

    See you soon.

  • The size of the base operating system Windows Vista on my Aspire 3680 282 is larger than 20 GB, is this normal

    The size of the base operating system Windows Vista on my Aspire 3680 2682 is larger than 20 GB, is this normal?

    Hello

    Yes; It's normal.

    In addition to the original operating system, you have updates, restore points of the system (set at 15% of the capacity of the hard drive) etc, etc.

    It will continue to grow.

    If you are worried about anything whatsoever, do a disk cleanup.

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    You can download this program for FREE and see what fits on the disc.

    http://www.Jam-software.com/treesize_free/

    And always scan your system for malware.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    See you soon.

  • I have a Genunine Windows XP (Home edition) installed PC imy. My RAM is 3 GB. Can I upgrade my system Windows Vista withuot spend the extra money?

    The product key for my Windows XP Home Edition is: XXXX-deleted-XXXX. While working in the PC, I get a MESSAGE"blingin on-screen ' OSB LOCKED: I want to know how to stop the message often displayed blinging."

    My second question is can I upgrade my system Windows Vista freely.

    My Hotmail ID of single widows is: [redacted]

    Rigaut

    First of all - do not post in a public forum product keys.

    Second - "OSB LOCKED"... Of course you did not mean "OSD LOCKED?  (a 'd' and not a 'B'...)

    OSD is the "On Screen Display" and has nothing to do with what version of Windows you have - but with yor monitor.  Look here:
    http://www.thefakegeek.com/2009/04/how-to-unlock-an-OSD-lockout-problem/
    http://h30434.www3.HP.com/T5/other-desktop-PC-questions/OSD-locked/TD-p/40291

    Last - is impossible to freely pass your system to Windows Vista.  Windows Vista is a product different from Windows XP and you will need to obtain a license.

  • Windows Vista crashes and displays a screen saying "the program does not.

    original title: crashing Vista

    Hello

    My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.

    I was not able to identify a single application or function as the source of my problems...

    My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".

    I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.

    H. Hansson

    Hello

    Did you change your computer?

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

    http://support.Microsoft.com/kb/929135

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Method 2:

    I suggest you to see the link and check out the program does not.

    What does it mean when a program is not responding?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

    Method 3:

    I suggest to download and install the Microsoft safety scanner and run the scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    See also:

    Ways to improve your computer's performance

    http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

    Optimize Windows Vista for better performance

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  • Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

    I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

    You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

  • Satellite M30X and the new Windows Vista

    Hello!

    I have the new windows Vista Business installed on my laptop Satellite M30x!
    Now I have a problem with my SD card reader... sometimes I noticed that if I put an SD card in, but most of the time, nothing happens. So, there is no any drivers or firmware to date.
    I don't know what I'll do because there are not too all the compatible drivers for my digital camera...
    Of this, I just want my SD card reader is probably running on vista!
    Can someone help me please? It would be great!

    Nice greetings
    Markus

    Hello

    I guess you need a driver for Vista compatible cardbus.
    I noticed that Toshiba provides the Vista driver not for all Toshiba laptops.
    Right now the Vista drivers are provided only for several series of laptops.

    I got this Toshiba document on the support home page, and it seems that satellite M30X is not listed in the Microsoft Windows Vista support driver index ;(

    http://support.toshiba-tro.de/KB0/TSB7201SK002HR01.htm

  • Failure of the system to Vista Home

    I accepted a download of the sytem on 10.8.09 updates crashed my system giving an error message! Oxc 0190036! 2745/93173 (regsvc.dll).

    -What this means and how can I restore my system?

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

    Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

    Updates fail for a more likely reason.

    Check if you have errors associated with updates?

    1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
    2. In the left pane, click view update history.
    3. Find an update for Windows that has failed to install, and then double-click the update to view more information. Updates that have failed to install will display failed under status, next to the name of update.
    4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
    5. Follow the links in the dialog Windows Update under more information or help and Support to try to solve the problem, then try to reinstall the update by using Windows Update in Control Panel or to display error codes/messages and maybe someone may be able to help others.

    Suggestion:

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • Windows Vista boot and goes directly to the F8 screen

    Windows Vista Boot and goes directly to the F8 screen, when you select an option it the computer goes black and never start. I do not install any program again, I worked with my online banking and the computer freezes I turn it off and restart and from there to show this problem. I test the computer with seetools to test the hard drive but when I hit to accept the test the keyboard won't obey my order; later I test with Hiren and I could make a mini feture call windows xp here I could see the C drive and all files on this too, I was able to open it. What you think about that happening could be the operating system or perhaps another problem?

    Hello

    Please follow the steps mentioned in the link below.

    What to do if Windows does not start successfully http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

  • After using it for years I now get the message on the screen " Windows Vista Build 6002 this copy of Windows is not genuine "

    AAAAnd to the interest of the human mental health, I've been asked this question all on my own and started a new thread! I want to say that I took the link that I had in my e-mail by microsoft to join in the forum with excactly the same question! My appollogies all I upset and confused! But what the * I am supposed to do if Microsoft take me to a forum etc. etc. to associate myself with ppl that are having the same problem... that's all public reading for all trying to learn... If the techys said great and I don't want that they are great! give an answer to a person having the same problem, giving specific instructions to follow... that is to say, 'this type', 'type' etc... I would do the same thing... so saving the great techys having to do the same answer over and over again... I was just joining in the forum according to the instructions... what else I could do... as a noob? Any hooo, goes here; - Diagnostic (1.9.0027.0) report: - Windows Validation Data - Validation status: invalid License Code of Validation: 50 Cached Code of Validation online: 0 x 0 Windows product key: *-* - R7X4H - 6F2XJ-VVMP9 Windows Product Key hash: UqxyryRKzOt7kYPGi0qReynjiPg = Windows product ID: 89576-OEM-7332141-00216 Windows product ID Type: 2 Windows license Type: OEM SLP Windows OS version : 6.0.6002.2.00010100.2.0.006 ID: {09C2AAAB-35DD-495E-B85B-FFBA1ACDB85E} (3) is Admin: Yes TestCab: 0x0 LegitcheckControl ActiveX: registered, 1.9.42.0 signed by: Microsoft product name: Windows Vista (TM) Business Architecture: 0x00000000 Build lab: 6002.vistasp2_gdr.101014 - 0432 TTS Error: Validation diagnostic: resolution state: s/o Vista WgaER data - ThreatID (s): n/a, hr = 0 x 80070002 Version: n/a, hr = 0 x 80070002 Windows XP Notifications data - Cached result : n/a, hr = 0 x 80070002 file exists: No. Version: n/a, hr = 0 x 80070002 WgaTray.exe signed by: N/A, hr = 0 x 80070002 WgaLogon.dll signed by: n/a, hr = 0 x 80070002 OGA Notifications data - Cached result: n/a, hr = 0 x 80070002 Version: n/a, hr = 0 x 80070002 OGAExec.exe signed by: n/a, hr = 0 x 80070002 OGAAddin.dll signed by : n/a, hr = 0 x 80070002 OGA data - Office status: 109 N/A OGA Version: n/a, 0 x 80070002 signed by: n/a, hr = 0 x 80070002 Office Diagnostics: the données--025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3 browser Proxy settings: n/a User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32) default browser: C:\Program Files\Google\Chrome\Application\chrome.exe download signed ActiveX controls: fast download unsigned ActiveX controls: disabled run ActiveX controls and plug-ins: allows you to initialize and script ActiveX controls not marked as safe: disabled allow scripting of Internet Explorer Webbrowser control: disabled Active scripting: allowed ActiveX controls recognized safe for scripting : permis fichier Scan données--fichier de non-correspondance : C:\Windows\system32\uxtheme.dll[6.0.6001.18000], Hr = 0x800b0100 File Mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386], Hr = 0x800b0100 Other data-- Office Details: GenuineResultsMachineDataUGUID{09C2AAAB-35DD-495E-B85B-FFBA1ACDB85E}/UGUIDVersion1.9.0027.0/VersionOS6.0.6002.2.00010100.2.0.006/OSArchitecturex32/ArchitecturePKey***-***-***-***-VVMP9/PKeyPID89576-OEM-7332141-00216/PIDPIDType2/PIDTypeSIDS-1-5-21-127489172-3573878905-2511511925/SIDSYSTEMManufacturerNVIDIA/ManufacturerModelAWRDACPI/Model/SYSTEMBIOSManufacturerPhoenix Technologies, LTD/ManufacturerVersion6.00 PG/VersionSMBIOSVersion major="2" minor="2"/Date20050721000000.000000+000/Date/BIOSHWID44303507018400F6/HWIDUserLCID0809/UserLCIDSystemLCID0409/SystemLCIDTimeZoneGMT Standard Time( GMT + 00:00) / TimeZoneiJoin0/iJoinSBIDstat3/statmsppid/msppidname/namemodel/model/SBIDOEM/GANotification / / MachineDataSoftwareOfficeResult109/ResultProducts/Applications / / Office/software/GenuineResults Spsys.log content: 0 x 80070002 service licenses data licensing - software version: 6.0.6002.18005 name: Windows Vista (TM), Business edition Description: OEM_SLP operating system Windows - Vista, channel ID of Activation: fd3bcb98-5c55-4b2d-ae32-a4515e3c17a3 ID of the Application: 55c92734-d682-4d71-983e-d6ec3f16059f Extended PID: 89576-00146-321-400216-02-2057-6002.0000-1682011 install ID: 016895113696003725658623885756703736700974853226446774 processor certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43473 Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474 use license URL: http://go.microsoft.com/fwlink/?LinkID=43476 product key certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43475 partial product key: VVMP9 license status: Notification Notification reason: 0xC004F057. Windows Activation Technologies - N/D data - HWID HWID hash running: NAAAAAEABAABAAEAAQABAAAAAgABAAEAJJSo + rQTHAH + 6zReAIfk + VoX8vQG75InrFYMxQ == OEM Activation 1.0 data - s/o OEM Activation 2.0 data - valid BIOS for OA 2.0: Yes, but no SLIC table Windows marker version: n/a OEMID and OEMTableID consistent: n/a BIOS Information: ACPI Table name OEMID value OEMTableID value APIC Nvidia FACP Nvidia SSDT PTLTD POWERNOW MCFG Nvidia AWRDACPI AWRDACPI AWRDACPI

    Diagnostic report (1.9.0027.0): - Windows Validation Data - Validation status: invalid license Validation of Code: 50

    Code of Validation caching online: 0x0

    Windows product key: *-* - R7X4H - 6F2XJ-VVMP9

    Windows product key hash: UqxyryRKzOt7kYPGi0qReynjiPg =

    Windows product ID: 89576-OEM-7332141-00216

    Windows product ID type: 2

    Windows license Type: OEM SLP

    The Windows OS version: 6.0.6002.2.00010100.2.0.006

    Data analysis of files-

    [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6001.18000], Hr = 0x800b0100

    [File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386], Hr = 0x800b0100

    SYSTEMManufacturerNVIDIA/ManufacturerModelAWRDACPI/model/SYSTEMBIOSManufacturerPhoenix Technologies, LTD./ManufacturerVersion6.00 major PG/VersionSMBIOSVersion = '2' minor="2"/Date20050721000000.000000+000/Date/BIOS

    Licensing of data-

    The software licensing service version: 6.0.6002.18005 name: Windows Vista (TM), Business edition Description: Windows operating system - Vista, channel OEM_SLP

    Partial product key: VVMP9

    License status:

    Reason of Notification notification: 0xC004F057.

    OEM Activation 2.0

    Data - Valid BIOS for OA 2.0: Yes, but no SLIC table

    No problem - it happens :)

    Thanks for reposting.

    Unfortunatey the formatting of the report is turned to h3ll, so I can miss somethig. but that's...

    Your problem is due to what looks like two things - fixable one and the other perhaps not repairable.

    (1) your installation is licensed OEM_SLP, on what appears to be a motherbaord detail - have you replaced the motherboard at all, or sent to the machine to be repaired? I to this is the maor problem eventually and not repairable.

    (2) you have a couple of current file incompatibilities, which would also cause non-genuine advice. There is no point in trying to fix this unti, we establish the situation wth the motherboard and the Windows license.

    Is there a COA sticker on the case of the machine? If so, what version and edition of Windows is valid? (NOT posting the key!)

    What is the brand and model of the machine - or is it a machine on measurement or house built?

    If homebuilt - it seems that someone has installed the system using the recovery to an Asus computer disks. This does not work, because the Recoverydisks require the appropriate BIOS to work properly.

    post back with your answer, and we'll go from there.

  • How to change the system from Vista Home Premium to Vista Ultimate 64 withoute lose the option of HARD drive backup?

    IM now running Vista Home Premium 32. I would like to change the system for Vista Ultimate 64 so I can run more than 4 GB of memory. Now Ive some factory settings if something happened, I can run my HARD drive restore. My question is how to change the Vista 64 operating system, so I can keep the recovery on my hard drive partition?  Mayby there is some kind of upgrade cd?

    Thank you

    Hello

    32-bit to 64-bit is not an upgrade

    It must be done with a clean installation using a full version ' / Ultimate 64 bit license

    Contact the manufacturer of your computer for more information on getting 64-bit ultimate, which I doubt they will always

    and microsoft sells more vista

    they moved on windows 7

    and you are supposed to make this partition recovery disks to reinstall vista

    ask the manufacturer of the computer how to

Maybe you are looking for