Driving error

Similar Questions

• Im trying to install vista service pack, its driving me crazy. im making error code ox800700. Please help2

  Im trying to install vista service pack, its driving me crazy. im making error code ox800700. Help, please

  Hello

  Error message: 0 X 8007002 can occur if the update of Windows on the computer database is incompatible with the instructions of the update database.
  
  Refer to the suggestions from the following link and check.
  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698

• Receive error message "not created Direct 3D engine" when starting of Driving simulator 2012

  Original title: Direct 3D engine has not created

  When you start Driving simulator 2012 I get this message. Help, please!

  Thank you.

  Hello

  Update the video card drivers and check

  How to manage devices in Windows XP

  Hope this information helps.

• Windows 8.1 will not sleep and error when restarting - DRIVING ME INSANE

  Hi guys,.

  Since the upgrade to Windows 8.1, my laptop never sleeps, now I updated the graphics drivers and it seemed to solve the problem but now it's back to not sleep well again and then just restarts my laptop and take 20 seconds or more to start again.

  When I wake my laptop Inspiron 15R SE 7520 after hibernation an error message with the blue screen "" thread_stuck_in_device_driver".

  All the drivers are updated according to Device Manager. I also left the HOMEGROUP.

  I just have no idea how to solve this problem and I just tired to try since the upgrade to windows 8.1! With windows 8, he wakes up from his sleep in 1/2 seconds... now nothing!

   

  Thank you

  Ravi

   

   

  Hi guys... good new

  I just managed to find myself a solution at LAST! : D (to do with 7730 graphic M AMD Radeon driver...

  I did a little digging around the internet and found this link:

  http://en.community.Dell.com/support-forums/laptop/f/3518/t/19477777.aspx

  that seemed to solve my problem!

  I only downloaded this link below and without having to reinstall what she just did everything for me by using site Catalyst Display Driver/software AMD.

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64

  My laptop now sleeps in the 2 to 5 seconds and boots to the top in the second now: D.

  I have Intel Graphics HD 4000 and AMD Radeon HD M 7730 installed on my Dell 7520 15R SE.

   

  It cannot help EVERYONE, but hey it's worth a try.

   

• Error message 404 after the first page of every search. It's driving me crazy that I really need pictures!

  Anyone else had this problem? Why me? How to stop what is happening so I can look for?

  Try to clear your browser cache. Are you by chance using Chrome for your browser? If so, try disabling your browser plugins.

• Firefox 40.0.3 is a disaster. I constantly, constantly getting error 404, same visitors sites to present no problem. That is what it is?

  Since I installed 40.0.3, Firefox has been problematic, constantly sends me 404 errors that I have to search the Web or visit the sites to display without problem. It has gotten to the point where I went to OmniWeb, even if it's just as buggy, if not more. Yet, I can at least visit most of the problematic sites on Omniweb after getting the 404 on Firefox. Firefox has always been a big eater of memory, but I could live with that. These 404 errors are driving me crazy.

  An example is the site of the game from the Washington Post. When I try to play daily crosswords and click on 'Play now', I always get the 404.

  This has been helpful, but what really solved it was going through the process given in the following link:
  https://support.Mozilla.org/en-us/KB/troubleshoot-extensions-themes-to-fix-problems

  It turns out that I needed test defective and ultimately extensions, disable the extension Searchme.

  Thanks for having me on the right track.

• With the latest Firefox, I get errors on Tumblr and Flash blocking drive almost everytime I watch a video on Tumblr.

  This has been driving me crazy for days now. I've updated to the latest version of Firefox, but whenever I go to a Web page on Tumblr, (my dashboard, my personal blog, blog of someone else) I'm bombarded with error messages saying too "recursion." I get usually anywhere from 3 to 5 messages per page. I went back to 34 Firefox and can now access Tumblr very well, but then I am faced with a different problem. When you watch videos or the vines on Tumblr, they can spontaneously trolling, jigging or stop playing. If I try to resume them, then they might start to play but all the sound elements will be cut. This seems to cause some sort of problem with Flash Player, because after what happens on Tumblr, and then it will happen on ANY video game site that I visit. If I try to watch a video on Youtube, the video will be spasm for a few seconds and then go on static and say "an error has occurred, please try again later." I tested it on other video sites like Blip, and they also cause audio and video bugs. Even if I close Firefox and start it again, the problem will not be solved. The only way I found for fixing injuries is manually reinstall Flash Player (which forces me to reset Firefox anyway). This was a great nuisance, as I had to reinstall the Flash Player and reset Firefox about five times every day for the last week or two. This leads me to consider dumping Firefox for Chrome, and I don't want to do that.

  Adobe Flash plugin has crashed - avoid that it happen

  • Update your graphics drivers to use hardware acceleration and WebGL
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  It is also possible to watch videos in the HTML5 video player, if you turn off the Flash.

• HP Officejet Pro 8600: what is error 351 for HP Office Jet pro 8600 all-in-one

  I can't send or receive faxes on my HP Officejet Pro 8600.  I get a 351 error when I try to fax.  Can you help me?

  Here is the solution for error 351 and causes:
  Cause 1: the remote computer did not a command to fax on the local computer as the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.
  Solution: New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.

  Cause 2: The call waiting service can cause this error. The "click", heard a call incoming, is actually a momentary break from the line.
  Solution: Disable the ECM. Errors might still occur and could lead to a degraded on the received page image quality. However, the ability to send the entire document will be improved.

  Cause 3: The remote user pressed the Stop key while the reception was underway. In rare conditions, incompatibility between the two machines could cause the remote machine to abandon the call.
  Solution: Try to send to a lower bit rate.

• 8710 HP all-in-one: fax error 346

  I get the error message 346 when sending faxes.  I have faxed to other numbers and he's been through.   Fax 888-HP FAXME and got a return fax.  I tried Dow to slow speed and it did not help.  What can I do else?  I can't work like this!

  Hi @dorcase,

  Welcome to the HP Forums!

  I noticed your post that you found the error fax 346 with your HP Officejet 8710 printer all-in-one. I'm happy to help you!

  This error means that the remote machine (person you send) responded to a fax on the local computer command because the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.

  New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.

  Source: Fax Error Codes and Solutions.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• The action "Watch Me Do" has encountered an error. The operation could not be completed. (OSStatus error - 50.)

  Morning,

  • Material: Apple Macbook Air 13 ", mid-2013. 1.7 GHz Intel Core i7. 8 GB 1600 MHz DDR3. Etc...
  • El Capitan software to. 10.11.2
  • Automator to. 2.6 (419)

  I'm trying to automate downloads via iTunes take place during early in the morning to avoid using bandwidth more expensive. The operation (my apologies if I have the wrong terms, not a tech guy) fails and returns this error:

  The action "Watch Me Do" has encountered an error.

  The operation could not be completed. (OSStatus error - 50.)

  

  Is that what everyone has seen, or to which there is a known solution?

  Concerning

  James

  Watch Me Do is designed to replay the same click of mouse and keyboard events to the same speed.  Think of driving your car to work and record each turn and stop.  Then play each round and down at the same speed.  What to do if while reading the traffic moves a little faster or a little slower?  If you drive the same route to work, you could get a red light at an intersection that you had a green light to yesterday.  "Watch Me" does not know how to deviate from these changes, so he'll just to stop and report an error.  If iTunes launches slower or an event during playback takes longer to achieve because of different background running processes, it will have the same effect.

  Allowing automatic downloads in iTunes and help Automator to activate your device network at a specific time might be a better solution.

• Failure of the system recovery: Windows installation error message

  System: HP Pavilion a6554f

  OS: Windows Vista

  I replaced a hard drive failed (replaced 1 TB 750G).  Used my system recovery disks.  Recovery system worked well.  After the recovery is complete, Windows began to install and finally comes up with the message: "installing Windows could not configure Windows to run on this computer hardware."

  Recovery tried again, same result.

  Any suggestions?  Diagnosis recognizes the processor, the memory, and drived hard (all past).

  My apologies.  Another thread has answered with the same problem I had.

  Here is the response copied from this thread...

  I used a builders or OEM copy because the owner could not find their burnt copy and HP is no longer a media available for this model.

  Below you will find an article I googled describing the error and the fix.  Simple.  Once, I changed RAID on AHCI, no problem.

   

  Here is the Solution!

  Here's how:
  　
  Option 1: (as Microsoft says, http://support.microsoft.com/kb/2466753/en-us)
  -Configure your BIOS, change the method to control RAID AHCI or IDE / ATA
  -Get your chipset AHCI drivers from intel and load them when the installation program asks you (onscreen that choose you where to install windows, there is a button labeled as 'Drivers')

  the url is http://www.vistax64.com/general-discussion/295950-help-windows-setup-could-not-configure-hardware.ht...

  Thanks to everyone who offers great help!

  Darryl

• Absolute error-70216 SoftMotion starting linear movement

  When I start an asynchronous linear movement to aid softmotion express straight absolute move, the VI throws sometimes mistake-70216 (within 24 hours, this will happen certainly but not very often) and won't start not when I activate the performance indicator (no doubt goes from false to true).  Therefore, I am still able to run other commands (for example, can make a Straight Line speed and a reference to move) but not absolute moving Straight Line.  I don't know how to recover if I take this error, the only way I found to get it back is to restart my application.

  I'm running on LabVIEW Softmotion 2015 2015, the VI runs on a three 9035 and driving 9505 modules using unrelated areas.

  Hi Omar,.

  It seems that this is the intended functionality.

  Kind regards

  Michael Bilyk

  Technical sales engineer

  National Instruments

• VISA 1073807343 errors and 1073807202

  Hello everyone,

  I have several issues with the VISA 5.0.3 and LabVIEW 2010 SP1, and I don't know if or how they are related, so I'll post as much information as I have here. Please excuse the super post long, just trying to be thorough.

  Error BFFF009E (same as 1073807202 I think) appears to the MAX aperture as seen in attached ss1. When you try to open the VISA Interactive Control (IC), I get the message "failed to initialize the library VISA. The VISA interactive control utility will leave. "When I open any VI with a VISA resource and try to click the drop down arrow on the right to see the resources available, the arrow remains derpessed during a second, no field drop-down list is displayed, and then it returns to its original blank State. These problems all live together now, but before I could select BT VISA resources and use VISA IC, while I have always seen the error MAX.

  I tried to fix VISA, as well as VISA uninstall-reinstall 5.0.3 which I believe is the most recent version. No change. I also checked that visa32.dll exists as suggested in the article below. See systeminfo.txt attached to the installed software.

  http://digital.NI.com/public.nsf/allkb/1D1736BFD24A09878625742500241386

  This error seems to be related to an oscilloscope Tektronix DPO 2014 I connected via USB (or maybe something to do with TekVISA?). By this I mean that if the scope was connected when my computer started, this error occurs. When the field is not connected at startup, I don't see the same problems as above. Instead, I get...

  Error 1073807343 (BFFF0011) when you run a VI with a VISA resource to a serial device (see ss2), or connecting to the device in IC of VISA (see ss3). I also always see the error of BFFF009E to the MAX, but not the other problems on front. I can connect to these serial devices in hyperterminal and communicate very well here. Seems similar to the post below and also, I can't find visaconf.ini, but the solution does not apply as I LV 2010. In addition, ironically, I use VISA very well talk to the scope (whether to the MAX or LV) via USB if I connect after booting.

  http://forums.NI.com/T5/instrument-control-GPIB-serial/using-HP34401A-in-LabVIEW-yields-error-code-1...

  I use series of USB adapters made by Ultra (http://mail.ultraproducts.com/product_resources.php?cPath=35&pPath=782&productID=782 ) to go from instruments of series to my USB ports and the computer I'm unfortunately has no serial ports to be tested with, nor do I have another brand of the adapter. I know these converters can sometimes be a VISA problem, but I was certainly with it even without problem before.

  They that all seem to have intermittent problems, because I have seen both before as I have developed and pushed to go to strange as things exchanging (apparently identical) USB extension cables or restart a dozen times. This issue has been driving me crazy for weeks, I am looking for help to try to solve it finally.

  Thank you

  Ratti

  I think I got especially. Looks like it was TekVISA who got in the way, and if Visa32.dll was in the right place, it appeared (in properties > details) as the version of Tektronix, not the version of LabVIEW. After you have uninstalled all Tektronix as well as NI-VISA, he had disappeared, but no money to install or repair NI-VISA would be replaced by a version of LabVIEW Visa32.dll.

  However, with the help of the article from the link below, I discovered that the repair of the installation of the driver NI-VISA DURATION is what replaces Visa32.dll, as opposed to NO-VISA just as messages of error and other links seemed to suggest.

  http://digital.NI.com/public.nsf/allkb/B283196340462DFD86257633006DC799

  Now all the VISA stuff works again, except of course for the scope of Tektronix. I'll keep this battle for the future. Guess I just needed to talk to myself for a while.

  -Ratti

• New installation of Win 7 Home Premium 64 bit - Windows Update does not work error 80072F8F

  I just bought and installed WIn 7 Home Prem on a new 1 TB drive.  When I try to run Windows Update I get error 80072F8F.  After reviewing several days, I have now tried and failed to get anywhere:

  • Checked the time date and resynch'ed against the internet several times
  • checked that I can access https://partners.microsoft.com
  • downloaded all certificates of a XP machine and a Vista
  • Use regsvr32 to the following dll: softpub Microsoft initpki mssip32
  • reinstallation of Windows 7 with nothing else

  I can't rename the folder "c:\Windows\SoftwareDistribution" as suggests a position as it is said always used and I can't understand what is using it.

  Please note that the internet works on both IE and Firefox and I have activated Windows 7.

  It's driving me crazy.  How Microsoft may not get its own OS for talking to himself!  Win 7 is fine for now, but it won't take long to get left behind, if I can't run updates.  Can I still use XP I put up as a dual boot.

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  HowManage , Configure and troubleshoot Windows updates

  If the problem persists, have you tried to create another user account and see if that fixes the problem?

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I recvd error 'program compatibility problem' for my logitech g27 wheel.

  Logitech G27 Racing Wheel game controller

  I recvd 'compatibility problem program' error for my logitech g27 steering wheel wheel.it has been running for 1 1/2 years.

  Hi, Raceready6,

  You have posted to the Feedback Forum of responses from Microsoft.  This question should be posted in the Forum located here games

  http://tinyurl.com/7rale6r

  Compatibility PlayStation3 game with Logitech G25 and G27 racing wheels

  This table is a sample of a few PS3 popular games released in the United States. If your favorite game is not on this list, the game can still support your Logitech wheel. Contact the developer of your favorite game for information more up-to-date on the wheel support.

  http://tinyurl.com/75y7gxc

  Steering wheel general troubleshooting of game consoles (Wii, PS, Xbox, etc.)

  If my wheel does not work on my game console (Wii, PlayStation, Xbox, etc.), what should I check before contacting support?

  On a console, there are two things to check if a wheel does not work in a particular game:

  • Hardware configuration
  • In-game support for ruffles

  NOTE: If you have a Driving Force GT, and most of the wheel works with the exception of the special as the PS button buttons and Horn, see article 10768 Knowledge Base. If you have a steering wheel Driving Force, and that you are trying to play a game that is inherited from the Playstation (PS1/PS2) on a PS3 console, see article 10767 Knowledge Base.

  Installation of equipment:

  To check your hardware configuration

  1. Turn off your game console
  2. Disconnect the power adapter of the wheel.
  3. If you have a wheel that mounts to a desktop, check the AC adapter cable is firmly connected. A loose connection in the steering wheel unit to be recognized.
  4. Check the working of the power source. Some wall sockets can be controlled by a wall switch. If in doubt, try to plug another device into the wall to check the functioning of the power.
  5. Check that the USB cable has not plucked or separations in the thread.

  In-game support:

  To see if the game is compatible:

  1. Logitech.com is trying to keep a list of the supported games on the product page of each wheel. If your game is on this list, then it is certainly supported. If this isn't the case, you may need to contact the developer of the game.
  2. If your game is listed as supported on Logitech.com, but you can't use your wheel again, your game or console may require an update. It is recommended to connect your console to the internet, and then start the game in question. If your console is connected to the internet, most of the games automatically checks a status update. Try to complete each game, in addition to your console, if necessary.
  3. Try a different USB port. Some games have specific requests of what port should be connected to a wheel.

  Additional information:

  If you try these steps and your drive still does not work, contact Customer Service. The representative may ask you to repeat, or perform some variants, these steps to check the activity of the wheel. Perform these steps with the technician can resolve your case, we recommend following the steps requested by the technician.

  http://tinyurl.com/7lerfvt