Failure of the system recovery: Windows installation error message

Similar Questions

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• Vista home premium, new hard drive, recovery "windows installation error.

  Pavilion m9340f Vista Home premium.

  original hard drive & replacement two seagate barracuda SATA

  "installation of windows could not configure windows to run on a hardware on this computer."

  After the disk crash, replaced the hard drive.

  Using Vista Home Premium SP1 recovery disks (disk w / extra) HP, has begun to recovery.

  First step was to run the tools, test drive.  Seek and scan spent.

  Put 1 in the drive and powered drive, then on it.

  Bridged system restore and went to recovery.

  All the drives used, including the additional disk.  Everything is OK

  reformat & reinstalling original content OK

  "Complete recovery" & restart OK

  Opens the window with 'startnet.command', 'building the partition' appears

  With "HP Flexbuild 2.0"appears, and then restart

  "Windows Setup" starts.

  copy of files OK

  extension of the files OK

  installation of OK features

  installation of updates OK

  end of installation - it is here that the window with the ' installation of windows... neck material. appears

  I have no idea where to go from here.  Seagate, told me to "call HP.  Support HP told me to buy another machine, although I had to pay for the support.  This forum and Microsoft are my last hope.

  Can someone PLEASE suggest something.  I can't just throw this machine.

  PROBLEM SOLVED!

  Dig kept and article found

  "

  Can not recover the PC after replacing the hard drive with a drive AF (Windows 7 and Vista)

  http://support.HP.com/us-en/document/c03509131

  I had an old WD 1 TB drive is not AF.  Put it in and everything worked fine.

• failure of the system recovery

  Recovery system fails, doesn't specify any changes.  Impossible to determine what the problem is windows 7 pro is the operating system. Have removed all the new software and still no recovery.  Help please?

  Hello

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • What is the exact error message?
  • How you try to run a system recovery?
  • What is the issue that you are experiencing that you run a system recovery?
  • What is the brand and model of your PC?

  See also,

  https://support.Microsoft.com/en-us/KB/555375

  Do not respond with the required information. We will be happy to help you.

• Windows guard stop my iTunes program. It is an occurrence relatively new. The error message is a Windows Installer error message.

  I installed iTunes about 2 years ago.  I used it to download music on my iPod.  A few weeks ago, when I tried to access iTunes store to buy new music, I got the message from Windows Installer saying that the Setup file was not available - iTunes message is: "the component you are trying to use is on a network unavailable resource.  .. .enter a different path to the folder containing the installation package iTunes64.msi... »

  You get this message because the installation file you downloaded about 2 years ago is long gone (you probably deleted shortly after you have installed iTunes).

  Why something is trying to access the installer is a different matter.  Probably the best way to proceed is to completely uninstall iTunes and reinstall the latest version.  This will NOT delete your music and playlists (but of course, you should have backups for all these data in any case).

  You neglected to indicate what version of Windows you have, but given that you asked your question in a forum for Windows 7, use the following instructions--> RBanque‑client, and then reinstall iTunes and other software components for Windows Vista, Windows 7 or Windows 8

  If you have problems uninstalling something, see http://support.microsoft.com/mats/Program_Install_and_Uninstall

• Windows Installer error message

  When you try to install Java, I get an error message saying that Windows Installer are not available. It can occur if you are using without failure or if Windows Installer is installed incorrectly. I'm not in safe mode. I don't know what to do to fix this. Help, please!

  Hello dawn,

  I suggest that you try the procedure described in the article for this problem:

  http://support.Microsoft.com/kb/2438651#reso1

  Link: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/i-cannot-reach-any-microsoft-websites-but-80-of/ae372dc9-be81-e011-9b4b-68b599b31bf5

• Receive a Windows Installer error message is not installed correctly.

  the Windows Installer

  Updates missing im and my comp. do not update anything. It keeps popping up that my windows installer is not installed properly. What should I do about it?

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651/en-us>

  UTC/GMT is 19:20 on Thursday, October 13, 2011

• I try to install the latest Java and I get a Windows Installer error message: the system administrator has set policies to prevent this installation.

  I am running XP Home Edition.   It is in Mode without failure. I get the same error trying to install no mode without failure.
  I tried to install using IE8 and Firefox, and I'm administrator.
  I can't find where to change the settings!  Help?

  You anti-virus app may have made a change in the registry.

  If you are in a Corp. environment administrator can prevent it.

• Windows Installer error message and CS6

  I installed Design Standard CS6, and the last message I got was Windows 7, that the software may not be installed correctly.

  What should I do?  Install again?  Is there something I can check?

  I opened CS6 and it seems to work very well, but at the end, I got another message that something was wrong.

  Thanks for any help.

  Carla

  Hey, I downloaded and installed new cs6, and am happy to say, without error messgages!  I think I'm good to go now.  Thanks for the reply fast tho.  I'll keep this email, just in case I have other problems.

  Carla

  770-546-3943

  www.CRedPhoto.zenfolio.com

• How can I fix a windows installer error #1635

  When I open office 2007 (excel), the windows installer struggled to load the files to the worksheet. Then after repeating the efforts of serveral times this error is displayed.

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. What is the full and exact error message?
   
  Try the steps outlined in the article below and check out them.

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "the installation source for the product is not available.
  http://support.Microsoft.com/kb/932857
   
  You may also need a quick glance, the article below and the thread.
  List of error codes and error messages for Windows Installer processes in Office 2003 and Office XP products
  http://support.Microsoft.com/kb/290158

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/Windows-Installer-error-messages-1601-and-1635/32737368-fb65-4a33-A282-e4b3cf46e3f2

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• HP Pavilion g6-2298nr: when HP Recovery is not available... the system using Windows 8 as image backup?

  I would like to start with a big shout out to Paul T for his VERY useful thread here!

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-8-product-key-for-pavil...

  Family of a friend asked me to work on their laptop, because I know more about computers they do... they are people very well, was happy to help out, but true to form, like many PC users, they did not bother keeping the documentation provided with the laptop (HP Pavilion g6-2298nr), or they bother to burn recovery using HP DVD built in recovery software which is comes standard on laptops... If I am interpreting what HP's Web Site had to say about the laptop model HP Pavilion g6-2298nr, correctly, she is the serial number it is no longer eligible for free technical support and I have to pay a fee just to talk to someone and to order recovery of the HP DVD (family friend bought in Dec 2014 so it seems REALLY odd that I wouldn't be able to just order) DVD recovery without having to pay tech support a tax just to ask to order the recovery DVD!  .. But anyway...) ...

  Where was the product key "integrated" in the BIOS really comes in handy!   I crossed my fingers, used the method mentioned in the thread linked above, and it worked!   ... have to admit it was a bit strange at first, do not use the product key sticker like the old days, but I can see how it works better in the long term - helps prevent piracy, you don't have to worry if someone who do not realize the importance of product keys thumbnail it takes off and he throws...

  Unfortunately, it seems that when you reinstall Windows in this way, you lose the HP Backup and Recovery program ... in this case my friend family had the misfortune to pay someone to repair this laptop which has not bothered to tell them "Hey, I replaced the hard drive that goes wrong but if you don't get a laptop cooler for this sucker to the laptop just going to overheat again." ... of course, the money they paid what we call 'tech technician' who went down draining when the laptop fried a second drive hard, or maybe the tech them faced with a bad hard drive, who knows? (technology bought a hard drive OEM off ebay)...

  ... Sorry to sound harsh about this type of technology, I must confess I only worked in the field of PC repair for a few months more than a decade before letting him make a stay-at-home-dad (wife is a pharmacist so I'm lucky enough to be able to stay at home) so my experience is VERY limited compared to other people... but the back then I have always treated my customers the way I would treat a friend , and if it's a friend of you offer advice on the prevention of such problems in the future... this laptop gets HOT like you wouldn't, I seated him on a very reliable laptop cooler (slab thickness of aluminium which does a great job as a radiator with the fans, this one)

  http://www.Newegg.com/product/product.aspx?item=N82E16834953038

  "(and I left my friend's family know in no uncertain terms that they need to order this laptop cooler if they use this laptop...).

  Replace hard drive, I installed seems to work very well, but of course it is not an "official WD hard drive"... when I tried to install the software of cyberdirector photolink for example on the link below, received an error message "this is not a WD hard drive so cannot install this software"...

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model...

  that is fine I really don't think my friend family cares about this program... but it makes me wonder, even if I did trust the download at this link below

  http://www.TechSpot.com/downloads/5190-HP-backup-and-Recovery-Manager.html

  If program HP Backup and Recovery manager would work even first because it is not an official hard drive WD (I also ordered a hard drive OEM off ebay .. but does not support the family of my friend for the drive hard because they were good for my munchkins and did not want to pay through the nose for a more expensive hard drive so of course I tried to minimize my own...)... I also think the type of program is based on a "C" and "D" drive is set up as if it were when the laptop comes with the original hard drive and saves a copy of the backup on the disk "D"... I guess I could use disk management to create a different partition, label it "D" and see if HP Backup and Recovery work, but it seems a bit... questionable... not to mention that I feel uncomfortable to download something that is not directly on the HP Web site as an "official"... download

  I know that Windows 8 has a utility of 'image system' built-in that allows you to do exactly that... an image of the system... as I said my friend family is good people, but I'm guessing that sooner or later they're going to screw up this laptop by pulling again as do many users of the computer... it would be nice if I could burn a system image of what is on the laptop now on DVD and hang on, then when they come back to me screaming in the future ' help, laptop does not work yet! I can just restore the system image on DVD instead of having to go through the hassle of reinstalling Windows, graphics/audio/drivers etc., zillion Windows updates and an etc. all over again.

  What I was asking, that is... would this even work?    I have never tried to use the image of the system in a situation like this with the product being key ' built in ' BIOS, this kind of thing is brand new to... worth me burning the DVDs and hung their just in case where?

  Sorry for the long essay and thanks in advance to anyone who actually takes the time to read all this!

  Hello:

  Yes, which makes a system image will work.  I do it all the time.

  PC GE set up the way you want and make the image of the system and the usb drive recovery you'll need access to the system image, or you can use W8 OEM disk made you (via the menu to repair your computer at the bottom left of the screen install Windows when you start from the DVD) to boot from, and access to the system image.

  If you have the DVD you have to more than one.  Probably not less than 4.

  But as much as to try to submeter a recovery partition, which is not going to work.

  I am very surprised that you cannot order a set of recovery discs HP online at the link below, last line labeled order recovery media.  Some people have reported trying to enter information such as the serial number and the link is dead.  But nothing venture nothing have nothing.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5333338

  If this does not work, you can have your friends order a set of this provider no HP...

  http://www.computersurgeons.com/p-24205-Windows-8-64-bit-Supp-1-Recovery-Kit-708649-001-for-HP-Pavilion-notebook-PC-model-number-G6-2298nr.aspx

  I congratulate you for your help in providing your friends with this very time consuming project.