Drop being started.  What? Why?

Similar Questions

• my windows installation will not be completed which is why my pc not started.what can I do?

  My a was restart again, once again, then I update my Windows xp with the cd... what cd copying files after removed my pc blocking at 59% of the files.then copy I switch off the pc after startup it is not working properly and always crashes after awhile as before... my installation of windows will not be not complete which is why my pc don't started.what can I do?

  Hello

  Do you have any other operating system installed on the computer?

  The CD/DVD that you use to install Windows XP may be damaged and this is a possible reason why you cannot complete the installation of Windows XP.

  You can check with another CD/DVD to install Windows XP. In the meantime, you can also check out this link that talks about the installation of Windows XP.

  Install Windows XP
  http://Windows.Microsoft.com/en-in/Windows-XP/help/Setup/install-Windows-XP

  You can also check out this link that talks about the hanging of Windows XP configuration.

  http://support.Microsoft.com/kb/828267

  It will be useful.

• Run dill error... Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access is denided, what, why? How can I fix it?

  Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access denied, what, why? How can I fix it?

  It started the night with a black screen and the white Messenger active but I was unable to do anything. Took me most of the day and night to be able to close completely portable!

  Today, I can start but now get the error posted above. I can't use one of my system tools, such as defragmenting, disk cleanup or fix it! Nothing.

  I'm not very computer savey when it comes to computer repairs, I rely on others or my Windows Vista "Simplified" book, and it does not cover this problem.

  Please, can you help me.   Thank you.

  Hello

  Google has nothing that suggests it might be the malicious program or a start remains entry against malware

  http://www.google.com/search?hl=en&source=HP&q=ifificawajurija.dll&aq=f&aqi=&AQL=&OQ=

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Why does microsoft word has a Starter? Why it seems to load whenever you click on it?

  The computer is a compaq presario CQ57. What is the significance of a pause button. How can I restart the computer if I type this

  button. Is it possible to disable this feature?  Why the start of the 2010 microsoft Office feature seems to make it harder

  to use, I mean it loads for a long time before its opening? Why MicrosoftOffice 2010 uses the term Starter? Why not just say that it is a

  first instance? It gives the wrong impression. Isn't this just make things more confusing?  Should I try to load office 2007. I don't want

  navigate a new system just at the moment where I'm used to the previous. Why do we have to endure these ads that appear? Shouldn't this

  be optional?

  Hello

  I too hate this pause button. It is for many people who want to play media without having to turn on the machine (well at loading Windows). Turning it off can cause some other headaches later.

  1. this is how Microsoft wants people to buy its full product later.

  2. I think that Office (not Windows) 2007 and 2010 the TWO ribbons of use, not like the old 2003, and I also hate. We are talking about recycling for 40 thousand people here, not just you and me.

  3 good Office starter is a marketing ploy. Misrosoft gives a little HP (and other vendors) in OEM of Windows license fees and other suppliers HAVE to advertise for Microsoft.

  You can remove Office starter if you wish by using the Microsoft.

  http://support.Microsoft.com/kb/980557

  Kind regards

• My LR5 does not start. Why?

  My LR5 does not start. Why?

  @

  Hello, Jeff has Wright,

  I have to use my LR5 not in CC, but in CS. I deleted the existing LR5 and I reinstalled the DVD of the LR5 without link to the creative cloud. Tank you for your mail. Best regards.

  Paolo Franceschini

  He giorno lug/02/2014, alle ore 18:50, Jeff A Wright, [email protected]> ha scritto:

  My LR5 does not start. Why?

  created by Jeff A Wright in Creative cloud download & install - see complete discussion

  PaoloFranceschini you receive specific error messages?  What operating system do you use?  You have successfully updated to 5.5 Lightroom?

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the https://forums.adobe.com/message/6516812#6516812

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page:

  To unsubscribe from this thread, please visit the message page to. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in Creative cloud download & install by email or to the Adobe community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

• I opened a suspicious link and it kept is refreshing and nothing loaded, I'm little worried about being hacked, what I can do to fix things?

  Hello

  I opened a suspicious link and it kept is refreshing and nothing loaded, I'm little worried about being hacked, what I can do to fix things?

  I'm new to iphones I hope you could help me

  Thank you.

  There is no virus known for a non jailbroken iphone.

  Conclusion of the app, you are in double tap home button and close the app.

• I am trying to cancel my subscription, but it keeps telling me to contact customer service which brings me to this forum. I followed the links, but then I end up where I started. Why cant I just click Cancel?

  I am trying to cancel my subscription, but it keeps telling me to contact customer service which brings me to this forum. I followed the links, but then I end up where I started. Why cant I just click Cancel? Why can't I talk to someone on the phone?

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• tab ' FLMain 'in my menu START, what is it and why it will not open. " Win XP

  This tab with the image of a closed padlock appears periodically.
  Have had several calls of Support MS, they want to get AMMYY.exe, I think that yes they can get remote access to my computer?    I have some warnings in eventvwr?
  Mike

  Hello

  I'm afraid it's a scam!

  Microsoft will never cold call users asking for personal information or gain access to your PC. As much as possible these calls should be reported to your local association of consumer protection agency.

  In the United States, you can visit the Web site of the FTC (Federal Trade Commission) to report such issues:

  http://www.ftc.gov/bcp/edu/pubs/consumer/telemarketing/tel19.shtm

  More information and useful tips on how you can protect yourself against fraud please visit: http://www.microsoft.com/protect/yourself/default.mspx

  In addition, the FLMain is a process for Trend Micro TrendSecure. I recommend you to run a full scan with antivirus installed on the computer software.

• MacBook Pro 2008 does not start. WHY? (Fix included)

  I have an old soldier, a Macbook Pro in early 2008. Like many others with MacBook as old as mine, I had the problem of my Mac, no start, showing only a black screen when I lit. He came to the point that I roll the die, each time that I chose to shut down the computer, I was wondering if it would ever start again. After taking in to get fixed twice and he'd end up and die after a few weeks, I tried a quick (and free-_-) fix I could do at home. (Note this isn't my question again, because I want to help some people who have the same problem, I had). I found a (I hope I remember where) online and I still thank the poster that has name up to this day.

  The idea is the laptop overheating, refresh, then cross your fingers and hope that it starts. Here are the steps I followed:

  1. Remove the battery (if you can) and connect your Macbook.
  2. Find two pillows for "sandwich" of your Macbook with.
  3. Turn on the Macbook and put it on one of the UPSIDE-DOWN cushions. (This is critical!)
  4. Ask the second pillow placed on the computer (always upside down) and leave for an hour and a half, running. (It may help to cover pillows with more effective coverage trap heat).
  5. After that he did heating, place it in a room different upside DOWN and leave it for at least 8 hours. (Night works too).
  6. Turn UPSIDE down and pray that it starts. Repeat the operation if not... But if this is the case, you CAN use the computer right up. Just leave the upside when you have finished using it.

  WARNING! This Act of overheating probably detrimental to the health of your computer. My computer is running stronger and a little bit slower than before, but if it does not, what really does anyway? My point is, there is a risk that is innate to this process, although I've never had any real problems with it.

  Now for my question: WHY? Why the computer have this problem in the first place? Even if I found a solution, I would know exactly what I'm fixing. I was curious and were all that I could never find solutions, but no real explanations. If you have any ideas or knowledge in the field, I would greatly appreciate a response.

  In addition, if you have any questions about the fix, please file an issue. This post is also a way to help you guys as well.

  This particular type of MacBook frequently has graphic problems. This can be corrected (more or less) by "cooking" the logic board. What you are essentially a type of cooking with a mild detergent. And it has been done before!

  https://www.iFixit.com/answers/view/9045/MBP+A1226+logic+board+last+resort+fix+f or + nVidia + video + chip

  There are more rigorous methods, like this: https://www.youtube.com/watch?v=Ztzv2OlQJuU

• I can't get MacBook Pro to start what it is.

  I have a MacBook in early 2011 Pro 15 ".  The other day, while he was playing in Mainstage my computer decided to restart but never got past the loading of 3/4 bar.  I have run all shortcuts start and seem to restrict the question down to the hard drive.  I bought a new ssd and then had to borrow a friends MacBook to connect with disk utility (my computer wasn't allowing me to any disk utility) to format the ssd drive and install OS X.  I installed the new ssd in my MacBook and I always get the same question.  I can't get into anything other than the single-user mode.  What is a motherboard problem or a firmware issue?  Someone at - it any other ideas?  RAM is tested ok, ssd tested ok, clean install of Mac OS X starts with another computer so that the work of.  Tested cable SATA, reset SMC and LANDAU, ok I can't access internet recovery mode (it loads, and then the screen goes black to white).  I'll try a firmware reset disk, I don't know how it will work but when I can't access anything whatsoever...

  I guess that's an incorrect configuration of the installed SSD. Assuming that there is no mechanical problem with the installation of the SSD, here is how you should have put in place.

  Clean Install of Mac OS X

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  This will not work if your computer is capable of a resumption of network. See the computers that can be upgraded to use OS X Internet Recovery to see if you can use this method. If this isn't the case, then your computer initially comes with a version of Snow Leopard on an installation disc. Can you use this disk to partition and format the SSD install Snow Leopard. 10.6.6 or later, is required to access the App Store, where you can download El Capitan for installation.

• The code 10 times try to reinstall the CODEC Audio IDT high def. won't start what to do to fix this problem?

  I lost sound for my computer dell laptop when I try to reinstall the IDT hide. Audio CODEC I start error Code 10 can not when I try to reinstall. How can I fix this to recover my sound?

  Download and install the Audio drivers from Dell support for your particular computer page.

  What is the name and model of your Dell printer?

  See you soon,.
  Jerry

• my computer does not start what is wrong

  When I try to log on my computer screen is just

  _ like this and whats the problem and how can it solve this problem

  Start your computer in safe mode and try to system restore to return your system files and settings to an earlier point in time, and when it was working fine. Scan for viruses and other malware also try scanning using this program to ensure that the malware has been removed:

  http://www.Malwarebytes.org/MBAM.php

  Run the malware removal tool from Microsoft

  To run the malware removal tool, click Start - type MRT in the search box

  You should get this tool and its updates via Windows Update

  To download the visit of mrt

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

• Failed Windows 7 upgrade - now my computer does not start - what do I do?

  I tried to upgrade to Windows Vista 64 for Windows 7 64.  During installation to 75% of the last step, the computer "hung up" for hours.  I abandoned the installation to fail.  Have no idea why it does not have since I ran the compatibility test, deleted all the programs of conficting, anti-virus, etc.

  Now, I can't get the computer to boot.  I tried to go the last good start with Vista 64 and the operation failed.  I also tried a variety of corrections that are posted on several forums.  All I can get is a continuous loop of the attempts to start (for example. Windows - Vista - HP diagnoistics of screen - screen black screen prompts - and then he repeats)

  Without success, I tried to do a system restore - which also failed.  Any suggestions on how I can recover the system and try the upgrade again?

  Clean install Windows 7 with upgrade media
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp

  Clean install Windows 7 with upgrade media and the product key on formatted or empty blank hard drive
  http://www.mydigitallife.info/2009/10/27/clean-install-Windows-7-with-upgrade-media-and-product-key-on-formatted-or-empty-blank-hard-drive/

  -Activation of the phone it takes-

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Download acrobat pro XI, but it does not start what can I do?

  I downloaded Adobe Acrobat XI pro, but I am unable to get the program to start. Anyone know why this is happening?

  Hi lynh30910481 ,

  Please refer to this article if Acrobat does not start:- Troubleshooting start issues with Adobe Creative Suite 6, CS5.5, CS5

  If you are not able to open any PDF:- cannot open Adobe Acrobat or Reader PDF

  Kind regards

  Christian

• Drag & Drop and start

  After the Fusion 8 upgrade, I noticed that I can not drag and drop between Windows7 and MacOS (10.10.5)

  MORE when I run Merge (automatic start of Windows), NOW I get a "Windows is not stopped... successfully." "whenever I start, even if operating manual.

  I did nothing else than to pay and install the upgrade of Fusion 8.1

  I'd like to go back the way it was... drag & don't drop between Windows and Mac... no error starting Windows... suggestions?

  Thought of her old post on a similar problem.

  Once the update of Fusion to the 7 8 tools VMWare had to be installed... Once installed the two drag & drop began work and error starting Windows stopped... would have been nice to know to reinstall the VMWare Tools.