Drop copying of error VOB files to drive?

Similar Questions

• data extarneous of copy of the completed files C:\ drive. No space left for storage

  Running Windows 7 Premium Home Edition, 64-bit with service pack 1 and all other updates installed Microsoft.

  In the last two days, I copied an extreme amount of video files, for most AVI and MP4, (890 files containing 580 GB of data) mapped network drive Z (Western Digital Live Hub 1 TB) on external hard drive (Western Digital My Book, 1 TB) K. Copping took 40 hours to complete. No problem to complete the copy of the files.

  Problem is during the copy process, an extreme amount of noise data was placed somewhere on my main drive C:\. Total extraneous data are about 450 GB, which filled the C:\ drive. No room left on the road. I spent several hours trying to find and remove redundant data from C:\, but have not found where these data are currently stored.

  Where would these data stored? Y at - it a command string search in Windows or CMD Prompt I could use to find the data. All unnecessary data would have a creation date of the file of 10/05/2013 or 11/05/2013.

  Hello

  Thank you for contacting Microsoft Community.
  Try the following:
  Method 1: The offline files cache is a folder structure in the folder % SystemRoot%\CSC, which is hidden by default. The record of the CSC and all files and subfolders it contains, should not be modified directly; doing so may result in loss of data and a complete disassembly of the offline files feature.
  If you think corruption in the database, then delete the files using the offline files viewer. After you delete the files in the offline files Viewer, a synchronization of files may then be forced using Synchronization Manager. If the cache still does not appear to work correctly, offline files reset can be performed by using the following procedure:

  1. In Folder Options, on the offline files tab, press CTRL + SHIFT, and then click delete files. The following message appears:
     Cache files offline on the local computer will be reset. Any changes that have not been synchronized with computers on the network will be lost. Any files or folders made available offline will be more available in offline mode. A restart of the computer is required.

     You want to re - initialize the cache?

  2. Click Yes twice to restart the computer.
  Method 2:

  Use the registry editor

  If you cannot access the offline files tab, use this method to reset the cache offline files (CSC) on the system by editing the registry. Also use this method to reset the cache on the side of client/database files offline on multiple systems. Add the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\NetCache
  Key name: FormatDatabase
  Key type: DWORD
  Key Value: 1

  Note The actual value of the registry key is ignored. This registry change requires a restart. When the computer restarts, the shell will reset the CSC cache and then delete the registry key if the registry entry exists.

  Warning All cache files are deleted and unsynchronized data is lost.

  
  

  Using Reg.exe

  You can also automate the process of setting this registry value using the Reg.exe command line editor. To do this, type the following command in the window of Reg.exe:

  REG. EXE. REG ADD "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\NetCache' FormatDatabase /t REG_DWORD /d 1 f v

  For more information, please visit the following link:

  http://support.Microsoft.com/kb/230738

  If the problem persists, answer here.

• Contents of the zip file of the extraction error UNC or mapped drive

  In the last two days, I noticed an error in Windows Explorer zip file management. During the extraction of multiple files or folders to a zip file directly on a UNC or mapped drive letter, files Wizard previews only 2-3 "extract all files" - i.e. the extraction is incomplete. Using copy and paste in the Explorer window showing the zip to a different window of the Explorer showing the UNC/mapped drive destination also translates incomplete extraction of the archive, but it's a different set of 2 or 3 files that are extracted.  Extraction of the zip on a hard drive works correctly.

  Steps to reproduce the problem:

  1. open the zip files containing multiple files/folders in Windows Explorer.

  2. use "extract all files" or copy and paste the entire contents of zip archive to a UNC path or mapped network accessible drive.

  3. review the location target of extraction: only 2-3/folder files have been extracted.

  4 subsequently repeats steps 1-2 will add files to the location of the target at a speed of 0 to 3 files per race.
  Any suggestions to fix this?

  Hello sjd200,

  Microsoft Answers is mainly for consumer issues on Windows 8 Preview of consumer, Windows 7, Windows Vista and Windows XP.

  Since you are dealing with a network path, I suggest that you post your question in the questions of TechNet for Windows 7 ITPRO. You can post using the link below to post on TechNet.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  However, I found several posts that might be relevant to your question.
  This first post is perhaps what you are running in.

  Files not appearing is not in the network drive

  Zip files

  Copy of a Zip file on a share network not visible until you restart

  If the posts that I've included do not help your question, I suggest that you post your question in TechNet.

  Sincerely.

  Marilyn

• I copied the photo library on external drive, and that one photo now shows despite the file being 70 GB.

  I had a library in iPhoto on an external HARD drive, and it worked. This is a disc plu so I decided to replace it with a new one that doesn't take much space on my desk. I copied the library through an external DRIVE to another drive, and it seemed to work. However, it now shows that a single photo despite being listed in the file manager as containing more than 70 GB.

  I explored a bit further in the file using finder and preview and found many files sorted by date. The photos seem to be all there, but they appear in iPhoto when I switched to this library. Always only one picture appears.

  I decided to convert the copied pictures from iPhoto library and it took a lot of time to convert, but the converted library always display just a single photo in Photos when I switch to this library.

  I could import all of them individually, but it's a big enough job, if there is a way to get libraries to work correctly.

  Any suggestions?

  We need the details - what format is the drive? How is it connected? It serves a TM backup Volume? How you copied the library itself? The library still works fine on the old drive? anything else you can tell us which could help a total strange who don't see you help?

  LN

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Windows DVD Maker DVD I made has all the VOB files and I need my JPG files that I used to do (lost laptop hard drive)

  My sister-in-law stored a bunch of pictures and some movies on a portable player and she came to my computer.

  After inserting a blank DVD by clicking the promt to make a DVD using Windows DVD Maker, we now have a great slideshow and it includes pictures and two videos.

  now, I want to use the jpg to a diferent app photos and she lost the portable hard drive that she used to create

  Is it possible to 'come back the jpg' of the 'film' this DVD maker made? There is nothing else that VOB files now but I know that the JPG is somewhere... Laughing out loud

  My sister-in-law stored a bunch of pictures and some movies on a portable player and she came to my computer.

  After inserting a blank DVD by clicking the promt to make a DVD using Windows DVD Maker, we now have a great slideshow and it includes pictures and two videos.

  now, I want to use the jpg to a diferent app photos and she lost the portable hard drive that she used to create

  Is it possible to 'come back the jpg' of the 'film' this DVD maker made? There is nothing else that VOB files now but I know that the JPG is somewhere... Laughing out loud

  ==================================
  Long message... I hope the info is useful:

  VOB (as you know) is the DVD video format.

  You can not convert video to a format of photo as
  .jpg and retrieve your original images. And...
  None... copies of original source files are not
  archived anywhere on the DVD.

  A method (and probably not near what you)
  hope) would be to make the screenshots
  (capture) video. The resolution and
  sharpness of the capture will not equal
  the originals.

  The free VLC Media Player can read your
  VOB files.

  VLC Media Player
  http://www.videolan.org/

  For the installer for your screen Capture... Open VLC and
  Reach... Tools / Preferences / video button / video
  Instant image section.

  In the directory field... Search for and select a folder
  to save your captures po (for example... you could
  Create a new folder on your desktop and select)

  TO... Prefix... check the box... Sequential numbering.

  TO... Format, choose JPEG or PNG.

  Finally... on the left, click on the Save"" button.

  Now... Play the video and pause by pressing on your
  SPACEBAR when you see a screen you want to capture.

  To capture the screen... type...  SHIFT + S

  Press space to advance to the next photo...
  ect... etc...

  A possibility may be 'Solution B' in the
  next article:

  "Excerpt from photographs of wedding DVD videos.
  for printing.
  http://labnol.blogspot.com/2007/02/extract-still-photographs-from-wedding.html

  Word to the wise... If you use a software that will
  extract frames from the video... be aware that thousands
  photos can be made and you can fill in all
  your free space until you realize.

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Bridges, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? No Tech phone today?

  To all

  In Bridge, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? (No phone Tech Saturday?)

  Thanks for the quick responses today from anyone in the community,

  -Mark, Portland Oregon

  Please provide details: you are not trying to change the file type by changing just the extension, are you?  That won't work of course,

  Either you try to run some type of script?

  To change a file type, you have TO open the file in Photoshop and do save as.  That can be automated.

• Copy of iPhoto/iTunes to external drive for upgrade

  I would like to transfer my iPhoto (5.0.4) and files iTunes (9.2.1) of my old iMac G5 (running 10.4.11) to my new iMac (El Capitan running).

  My iTunes library is now on an external drive (and iTunes is headed there), and I would like to copy my iPhoto on the same drive - to move together on the new iMac while maintaining the structures of files etc.

  Can someone tell me what is the best way to do this? I'm not clear what iPhoto files files, I need to move or copy on the external hard drive to retain the current structure of the organization/etc folder or the process then bring them into the right place on the new machine.

  Simply drag and drop them where you want libraries to reside. As iPhoto is plu included you will use the Photos app. You can learn how to move the library iPhotos to Photos for Mac on http://osxdaily.com/2015/04/17/move-iphoto-library-to-photos-mac/.

  Insofar as your iTunes library, yet once just drag and drop. 'Teach' iTunes where the library is simply double-click the library and iTunes will find it and then "know" where the library.

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• Windows XP Setup error: the file ohci134.sys is corrupted?

  I was on my computer when my power cut off, and now it used to boot past the Windows XP loading screen, so I inserted the windows disk to run a chkdsk command or a repair, but I get the error: the file ohci134.sys is corrupted. Press a key to reboot the computer. »
  It won't let me access to the CD-ROM to install windows because of this error, and I can not boot past the windows loading screen! He's going to enter the safe mode options but whatever one I choose, it flashes a quick blue screen which says UNMOUNTABLE BOOT VOLUME. How can I fix?

  This is a nice article if it starts your desire to install the as option to start Recovery Console, your system and that you have a genuine XP installation CD bootable that corresponds to your installation.

  Here, the system does not start, there is no installation of the Console recovery and most people either have no real XP bootable installation CD or if they don't have one, it's older than their Service Pack installed.

  Unfortunately, we don't know anything about this system which is afflicted, except that it's a computer that no longer starts.  A little more detail would help, but that's the way things happen here in MS Answers forums.

  I just make a bootable CD of XP (no XP media required) Recovery Console and use it.

  Here's how:

  So, let's start with this:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• VOB files don't play no not in Windows Media Player

  I have several DVD that have been copied to my hard drive.  When attempting to open the .vob files, I use Windows Media player.  WMP opens, then closes while PowerDVD DX opens.  Nothing happens at this point.  Looking through the forums and search on the internet I can't find a solution that works.

  Hello jtrall, welcome.
   
  It seems that WMP (Windows Media Player) is given to the task of playing the. VOB to PowerDVD files because of several possible reasons:
   
  1 PowerDVD is set as default program for reading VOB file
  2 WMP cannot find a proper way to play the VOB file
  3. missing Codecs or other program incompatibilities
   
  In order to diagnose the problem and find a solution, we will need to know:
   
  1A Windows Media Player never been able to play the VOB files before?
  2. what version of Windows Media Player are you running?
   
  You should be able, as a temporary workaround, use PowerDVD as the DVD playback software. If you start PowerDVD, and then click File > Open (or something similar) you will be able to select the source of the DVD files that are VOB files stored on your computer.
   
  Send us the above information and we can go from there
   
  Thank you!

• Movie maker and the XVid codec and conversion. VOB files.

  I have converted a home video to use in movie maker a. VOB file to a XVid file. When I try to import this file filmmaker gives an error message. I installed the XVid codec, but I still get the same message.

  Filmmaker only works with some .avi files?

  Error message:
  Cannot import the file F:\Wedding data\Equal raw image cut\dave\VTS_01_4.avi because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  I managed to convert the file to a XVid, avi and wmv file and they all play. But none of them will import into WMM.
  I also checked that the codecs are installed correctly.

  ==============================
  Might be interesting to try to convert the VOB file to
  format .wmv using the following free software:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your VOB files on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• any copy forbidden error when you try to watch HBO in windows media center.

  I get all copying prohibited error when you try to watch HBO in windows media center. It seems that my PlayReady is corrupt. Whenever I try to update game ready to go in Media Center, it fails. I tried uninstalling and reinstalling PlayReady. Said again he must udpate, and always fails. Can someone at Microsoft PLEASE Playready works. It drives me crazy,

  These steps 1

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

  Still did not work.

  Then did it

  (5) download http://go.microsoft.com/fwlink?LinkId=105000 ResetDRM.exe

  (6) using winrar or winzip to extract files to ResetDRM.exe (ADVPACK. DLL CleanDRM.exe resetdrm.inf) to a temporary folder. ResetDRM does not work by itself on Windows 8 in any compatibility mode so you MUST check out it

  (7) use the Explorer to find cmd.exe to C:\Windows\System32

  (8) right click on cmd.exe and "run as Administrator".

  (9) cd to the temporary folder where you extracted ResetDRM.exe

  (10) run "CleanDRM.exe - v". A text window opens after a few seconds and check that several files have been deleted. If there is an error that a resource could not be opened for exclusive access, you may need to reboot and try again after making sure that Media Center does not start automatically

  Reset. Now works. Wow what a PITA.

  I think that it was all caused by have to swap disks.

  PlayReady my % $# ^ & $% ^ $@ #.

  I would mark this as an answer, but I don't see a button for that now, (fact)

• Error message: file already exists - crush or save under?

  When I try to open the .cp file I had already worked on today I now get the following messages series:
  
  1 C:\Documents and settings/vsutherl/My Documents\My Captivate Projects\game\game2.cp already exists.
  You want to overwrite the file or save it to a new file?
  
  When I select "Overwrite" or a file save as, I get the following in response message:
  
  Adobe Captivate cannot open 'game2.cp' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).
  
  This started happening after I tried to click on the game2.exe file to review the project in its final form (autonomous), but click on the file .cp by mistake, which was already open.
  
  Now, all four of the projects (which are clones of each other with simple text for each project edits) receive the same error message. I can longer open all source files (.cp) to make additional changes. This represents * weeks * to work and I can't start from scratch to rebuild all four projects - once again. I had many problems with these projects (by messages before here).
  
  Other projects (totally separate and apart from these 4) open correctly. However, when corrupt game2.cpgot he caused all other files gameX.cp to receive the same error message. resulting no not a single file is corrupt but all 4 even though the problem that was initially detected was then an attempt to (re) open game3.cp (although already open).
  
  How to overcome this type of file corruption? I use Windows 2000 and Captivate 3.
  
  Help and thanks!
  
  Vince

  I found the reason of the error (he says with a bit of complications). My hard drive full after copying game1 to create game2; Game3 and game4. My pc is a corporate pc standard-issue with only a 4 GB drive (although I do graphic and web development), causing the hard drive fills up quickly. Once I deleted some files from my hard drive I was indeed able to open each of the files gameX.cp. And while I understand why I would get an error message 'file corrupted' I wish that I had received a 'no space available' message instead. It would have saved a lot of time, trouble and effort (not to mention the frustration). I thank all of you for your quick response to my original post, it is really appreciated! Vince

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.