drop-down list - work with the default

Similar Questions

• Is this possible? Subforms appeal based on the drop-down list associated with the database

  I'm hoping to make a dynamic shape and I wonder if it's possible.

  I have a database with about 300 entries - pieces of agricultural goods and a few little bits of info on each of these properties. I want to create a form where users can choose the piece there rather than the property in a drop-down list. Based on the property they select, another menu drop down to fill with the cultures associated with this property. Then based on the selection made in this drop-down list, a specific form will be brought upward.

  For example, a person selects property #102 in the drop-down list. In the database, property #102 is associated with wheat, barley and corn, so the next drop would be complete with these three cultures. The user selects the wheat in the drop-down list and the form of wheat would be called. 

  I hope I explained that well enough.

  Is this possible? And if it's possible, how complicated to do? Assuming that I already have the database and subforms, it would be a long process from weeks to the script, or it would be simple enough?

  Yes, this could be done, here is an example that should help: Drop dependent dropdown (specimen attached)

  On the basis of selection (change event of the second menu drop-down), you can show or hide a subform.

  -Wasil

• Part of the browser screen will flash intermittently and when trying to select a link out of my drop-down lists, click with the mouse selects the link above it.

  These problems occur only when you use Mozilla Firefox. I am using a Lenovo Thinkpad:
  1 site Web seem to flicker on the images, videos, maps, when the mouse moves around the screen.
  2 pointing the mouse over a link in the browser and a left click activating the link above (if it exists)

  Do not experience problems with google or ie. It started a few days ago.

  Thoughts?

  Hello paulo.eichelberger, try Disabling graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options window as follows:
     • Click the menu button

       

       then select Options.

  2. In the Options of Firefox window, click the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Check generate some Comp based on the drop-down list box and the selection list?

  I currently have a dropdown list with the three sizing options in it. Then I have two check boxes, one is ticked ideally would create the model to its normal size composition and if other is checked that it would reverse the widthxheight in the size of the composition. Then below that I have a "Generate" button, I want to be able to click and according to my selections, it creates the model.

  Looks like I need a kind of if then statement, but I'm having a hard time putting the two together. See below what I have so far.

  There may be missing parts, but I have it all working in a decibel pallate currently. I don't have functionality related to a button again.

  Any help would be appreciated!

  (also I don't know how to format the script spread here so apologies for that)

  ---------------------------

  palette controls

  templateGen.VerticalCheckbox = new Object();

  templateGen.HorizontalCheckbox = new Object();

  set the values for controls

  templateGen.comLookup = new Object();

  templateGen.compLookup = 'Template1 ';

  templateGen.compLookup = "Template2";

  templateGen.compLookup = "Template3."

  function templateGen_getHashValues (hash)

  { // {{{

  var ary = new Array();

  for (k hash) {}

  ARY.push (Hash [k]);

  }

  return area;

  } // }}}

  menu "composition".

  var panelGrp1 = templateGen.palette.add ('Panel', undefined, 'Templates Comp');

  compGrp1 = panelGrp1.add ('group', undefined, 'List templates');

  compGrp2 = panelGrp1.add ('group', undefined, 'Orientation');

  compGrp3 = panelGrp1.add ('group', undefined, 'Generate');

  templateGen.compList = compGrp1.add ('dropdownlist', LIST_DIMENSIONS, templateGen_getHashValues (bapple.compLookup));

  templateGen.compList.helpTip = "choose the type of desired here device model. All compositions are 60 fps. « ;

  templateGen.compList.selection = 'Template1 ';

  templateGen.compList.graphics.foregroundColor = darkColorBrush;

  templateGen.VerticalCheckbox = compGrp2.add ('checkbox', undefined, 'Portrait');

  templateGen.VerticalCheckbox .value = true;

  templateGen.HorizontalCheckbox = compGrp2.add ('checkbox', undefined, 'Horizontal');

  templateGen.HorizontalCheckbox .value = false;

  templateGen.generateBtn1 = compGrp3.add ('button', undefined, 'Generate');

  applyBtn.onClick =? ;

  When I work with drop-down menus, I always liked to tie the data they represent (like the width and height of the model in this case) directly to the elements.

  I run the code to really check, but it should work like this:

  -----------------

  Add models to your drop-down list and store the items in a table

  models var = [];

  models [0] = templateGen.compList.add('item','template1');

  models [1] = templateGen.compList.add('item','template2');

  models [2] = templateGen.compList.add('item','template3');

  set a width and height of each element

  models [0] .width = 1280;

  models [0] .height = 720;

  models [1] .width = 1024;

  models [1] .height = 768;

  models [2] .width = 1920;

  models [2] .height = 1080;

  Choose the item that should be selected by default

  models [0] .selected = true;

  applyBtn.onClick = function() {}

  read the width and height of the selected item

  var width = templateGen.compList.selection.width;

  var height = templateGen.compList.selection.height;

  {if (templateGen.VerticalCheckbox.value)}

  swap width and height

  var temp = width;

  width = height;

  height = temp;

  }

  now create your comp here with the given width and height

  }

• drop-down list and using the selected command to select the fill element

  Hi I have a menu drop down being populated by a mysql table, the drop-down list works fine with reading and updating, but I wish I had the mysql stored id to select from the drop-down list on the edit page.

  I have the following code, but I can't point to be selected?  I think it is because I have not coded if statement properly.

  < select name = "stand_id" >
  <? PHP
  $stand_set = getall_stands();
  While ($stands = mysql_fetch_array ($stand_set)) {? >}
  <? PHP if (isset($_POST['stand_id']) == $url_show ['stand_id']) echo ' selected = "selected".
  « ' ; ? >
  "< option value =" <? PHP echo $stands ["stand_id"];? ' > '.

  > <? PHP echo $stands ["stand_descrip"];? > < / option >
  <? PHP}? > < / select >

  Any help would be really appreciated

  Horsemad Gilly wrote:

  the argument would be compared with $url_show ["stand_id"], ["stand_id"] $stands and then selecting the $stands ["stand_id"]

  selected = "selected".

• Can anyone help please if a drop-down list box with this dpdCategory.Items.Insert (0, "user")?

  can someone please help if a drop-down list box with this dpdCategory.Items.Insert (0, "user"); If I choose the user then after clicking the button, it will redirect to this page & also, others using if else statement

  Please ask this question in one of the Windows Apps development forums:

  http://social.msdn.Microsoft.com/forums/en-us/category/windowsapps

• Value of the drop-down list instead of the text

  I want a drop-down list that includes complete definitions for the user to watch but when they choose the item they want only the abbreviation indicating on the form. For example, in my items list is said 'Illinois', but when they select "Illinois" she fills the field with the bind value of 'IT '. Is this possible?

  See the attached file... If it helps...

  I place a TextField on the top of the drop-down list and setting the rawValue selected the TextField... In the case of exit of the combo I hide list drop-down and display of the textfield object. Similarly, in the event you enter in the text field, I am displaying the drop-down list field and hide the text field.

  This way I can show 'IT' If you choose "Illinois" in the menu dropdown.

  https://Acrobat.com/#d=7Y0qDg-ld6nWNxw8G-0cNg

  Thank you

  Srini

• Display the export value of the drop-down list instead of the element

  I'm showing the value to the export of a drop-down list instead of the selected option or the user selects BLACK, but the value of exports of BLK is actually displayed.  I can find many discussions on how to get the value of the exports and display it or use it to trigger another answer in another area and I can usually tweak my existing JavaScripts when I need something new, but I just can't wrap my head around this!

  This is my last attempt (failed)

  var f = this.getField ("eyes");

  If (event.value is 'Black - BLK')

  f.Value = "BLK".

  I use Acrobat PRO DC.

  Any help is appreciated,

  Thank you

  Xavier

  
  

  I've been doing this for a long time and have never heard of anyone who wants something like this, so it is interesting. Remove your current script and try the following script Format customized drop eyes:

  Custom drop-down list Format script

  Event.Value = event.target.getItemAt (event.target.currentValueIndices, true);

  This defines what is displayed in the drop-down list in the value of exports of the selected item. Select the 'Value selected to validate immediately' option to the drop-down list for smoother operation.

• Drop-down list always displays the first value? How can I empty place

  I have several drop down from the fields list. An example would be the city. It allows a user to select a city. I want the form to be completely empty to start. Currently, when the form is initially pulled up, it shows the first value in the list. All my drop-down list fields exhibit the same behavior. Is it possible to be just empty instead?

  You can send the form to [email protected] and I'll take a look to see what is happening?

  Thank you

  Paul

• Problem with drop-down list that prevents the use of the functions, will not go away.

  Hello

  I have Windows 7.  I could not afford MS Office, so I downloaded OpenOffice and, later, LibreOffice.  My problem is, when I open a document to write in a program, a drop-down list (formatting) is displayed.  It starts with "Default" at the top.  The box does not work, if I click on anything that it just flashes.  Or it will disappear.  I tried everything I can think of to get rid of him.  And, as long as it's here, I can't write to a document.  I can close, but only by closing the program.

  Is this problem only with free Office programs.  Sometimes when I am looking for a program in Windows 7, or if I'm looking for the Help menu in 7.

  I'm not very savvy computer.  If you would be interested to help me, thank you very much, but please don't expect me to know some thing on anything whatsoever.  I used to use the mode BACK back in the day, but the subterrain of computers is a subject that I've lost contact with long ago.

  You can also try to test with another Windows user, in case you have a corrupt user profile.

  If things were OK and then maybe a few days ago, System Restore is an option.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  Don't you see the same problems in Mode safe?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• XLATLONGNAME from the drop-down list should be a default value in the edit box

  Hello
  
  
  I have two fields in a grid, one named "TEST_Type" and one is named 'TEST_Name' edit box
  Use cases, TEST_Name by default will be TEST_Type in Drop Down.
  
  "TEST_Type" is the translation of edition Table and 'TEST_Name' will contain XLATLONGNAME.
  
  I do drag XLATLONGNAME of PSXLATITEM table in my grid and make related field and "TEST_Type" a related control field.
  
  Show LongName according to the value "TEST_Type.
  
  If the field 'TEST_Name' RowInit, I wrote
  
  If GetRow(). IsNew and
  No (MYRecord.TEST_NAME. Value) then
  MYRecord.TEST_NAME. Value = GetRow(). GetRecord (Record.PSXLATITEM). GetField (Field.XLATLONGNAME). Value;
  End - If;
  
  
  It gives an error
  
  "Class line method GetRecord account PSXLATITEM is not valid. (2 268)
  
  MYRecord.TEST_NAME. RowInit
  
  The recording has been used as a parameter of the specified method. It is not valid for the current object. »
  
  What is the problem?
  
  Is there a better solution for this use case?
  
  
  Thanks in advance

  I think you mix a few think upwards.

  The drop is on a class with the values of translate. So, when you set the property to the field from the drop-down list page to view the longxlatitem, you are finished.

  If you want to copy the xlatlongvalue for some reason any other areas, use instead the domain object properties.

  & dropdownlownlist = getrecord([YOUR_RECORD]).getfield ([YOUR_FIELD]);
  VALUE = & dropdownlownlist. LongTranslateValue;

  Kind regards

  Halin

• There used to be a drop-down list next to the arrows to go fwd and back through the pages. He showed the last several pages viewed. I also miss the option to the fence that allowed you to reopen all the tabs you closed with. Can recover us these feature

  What do you most need?

  You can get the menu drop-down by clicking on the previous/next buttons or now the left key pressed until the list is displayed.

  If you want the drop-down arrow, you can add it with the add-on of dropmarker rear - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

• Get the value of the drop-down list (selectedIndex) and the text field - does not

  Hi all

  I'm trying to find and change the values selected by the user using a drop-down list and text field. Here's the code.

  ChangeRevDetails();
  function ChangeRevDetails(){
  
  
            var myDialog = app.dialogs.add({name:"Enter copyright information"});
  
  
  //    var monthlist = col1.dropdowns.add('myList', undefined, myList);
  
  
            var col1 = myDialog.dialogColumns.add();
            var col2 = myDialog.dialogColumns.add();
    
      col1.staticTexts.add({staticLabel:"Month:"});
            col1.staticTexts.add({staticLabel:"Year:"});
      col1.staticTexts.add({staticLabel:"Rev. no.:"});
      
      var myList = [ "January", "February",  "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ];
  
  
       var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100});
       var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});   
       var MyRev = col2.textEditboxes.add({minWidth:100});
  
  
      var RevMonth = (myList [myMonth.selectedIndex]);
      var RevYear = myYear.editContents;
      var RevNumber = MyRev.editContents;
      var RevToReplace1 = RevMonth +", "+ RevYear;
      var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
  
  
      var myResult = myDialog.show();
  
  
          if(myYear.editContents == "") //entry is "" 
          { 
          alert("Please enter some text into the contents field."); 
          ChangeRevDetails(); 
          }
          else if(myResult == true) //user entered datas 
          { 
  
  
              alert (RevMonth);
              alert (RevYear);
              alert (RevNumber);
              alert (RevToReplace1);
              alert (RevToReplace2);
  
  
              app.findGrepPreferences = NothingEnum.nothing;
              app.changeGrepPreferences = NothingEnum.nothing;
  
  
              // grep find/change
              app.findGrepPreferences = app.changeGrepPreferences = null;       
              app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+";
              app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
              app.changeGrepPreferences.changeTo = RevToReplace1;
              app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
              app.activeDocument.changeGrep();
  
  
              app.findGrepPreferences = NothingEnum.nothing;
              app.changeGrepPreferences = NothingEnum.nothing;
    
      } 
      else //implies user clicked cancel 
      { 
      myDialog.destroy(); 
      }
  
  
  }
  
  

  The problem is, it does not take the value that the user selects in the drop-down list and the text field. It takes the default value as "January" and the year is '2013' as these two values are given as selectedIndex:0 and editContents: "2013". I compared the coding with a few other scripts work as well, but it does not work. I added several alert boxes to check the value we get.

  In addition, search for it and change also does not work. Please help me on this. Thank you.

  Kind regards

  Bachi. D
  

  Change the order of dialogresults:

  ...

  	var myYear = col2.textEditboxes.add ({editContents: "2013", minWidth:100});})
  	var MyRev = col2.textEditboxes.add({minWidth:100});)

  Ditto var = myDialog.show ();

  	If (myYear.editContents == "") //entry is «»
  	{
  	Alert ("Please enter a text in the content field.");
  	ChangeRevDetails();
  	}
  	else //user entered if(myResult == true) datas
  	{

  	var RevMonth = (myList [myMonth.selectedIndex]);
  	var RevYear = myYear.editContents;
  	var RevNumber = MyRev.editContents;
  	"var RevToReplace1 = RevMonth + ', '+ RevYear;
  	"var RevToReplace2 = RevMonth + ', '+ RevYear + 'Rev' + RevNumber; ...

  did not have a look for the problem of change to find

• Selection in the drop-down list box determines the text to display in another box - ideas?

  Hello, my name is Zac.  I spent a lot of time trying to figure this one out for myself, but I couldn't find what I needed.  A few threads looked promising, but I realized that they only apply to the LiveCycle.  Many other threads link to discussion 2006 Thom Parker on this subject, but it is very advanced and I feel that what I need is not as complex as the solution he proposes.  I've never used Adobe Acrobat until a few weeks ago, but with the help of Bernd Alheit and George Johnson I managed to create a document with fly-out help windows and scrolling lists and radio buttons which dictate the choice.  It's great and it works.  The last thing I have to do is to create a text box (or some kind of box) which will display a pre-written block of text based on the user choice in another area (a drop-down list box).  Like this:

  

  I wish, it is also easy to create because it draw a picture of him!  If the user selects "Algebra 1", for example, a specific description display below.  There are a lot of courses and descriptions, and the descriptions are long enough (as shown).  It is not necessary for the user to make changes to the description - in fact, which would be terrible.  But I would like to be able to copy text from it and paste the text in another area of text on the same page.

  Thank you very much, all those who have ideas please share them! Again wild guesses. I learn from all this.

  -Zac

  This involves using a script. If you want to write the code yourself read this tutorial:

  https://acrobatusers.com/tutorials/change_another_field

  If you don't feel like messing around with the code, you can use this tool that I developed to easily set up with the help of an input file:

  Scripts custom Adobe: Acrobat - fill the drop-down list

• second drop-down list based on the first drop-down list Jdev 11.5 of loading

  Hi all
  
  I have a requirement of the second dropdown on the first loading selection drop-down list.
  
  Ex:-con I drop down state list, when I select and national, it must load city States (dropdown).
  
  I tried to use valuchange Stanley with partial trigger, that it did not work. Any help would be a great help.
  
  Please let me know.
  
  Thank you
  Nitin
  
  Published by: 811407 on December 21, 2011 02:59
  
  Published by: 811407 on December 21, 2011 02:59

  http://www.YouTube.com/watch?v=nXwL2_RP7AQ.

  you for example: here goes.
  http://www.YouTube.com/watch?v=94PrwXWDEjI

  http://andrejusb.blogspot.com/2008/12/cascading-lovs-in-Oracle-ADF-11g-update.html