Drop down the list with prices

Similar Questions

• Bookmarks drop down the list too wide Firefox Mac OSX Lion 31

  When I click on the drop down bookmarks menu, it's too wide. If there is a folder in the contents list shown far right. At the point where I'm moving the mouse on there where the contents of the folder is it disappears. Am on Mac OSX Lion. I tried to scroll on the corners and sides of the drop down list to search again for the sizing handles, but none are. It is not just Firefox 31 version as has happened for some time. Any ideas please?

  Which may be caused by the presence of a few bookmarks with a long title in the main menu of bookmarks.
  The width of a column in the list of bookmarks is in the current versions of Firefox automatically adjusted the bookmark with the longest name.
  You can check the names of the bookmarks and the longer more short.

• Drop down the list in the grid depends on the drop-down list at level 0

  Hi all
  
  In my subpage, there are three areas of drop-down list D1, D2 and D3.
  
  D3 is grid to level 1 on a secondary page and the quick Table in D3 have 3 Keys.Key 1 and 2 keys are the same field as D1 and D2. As the D3 is dependent on the D1 and D2.
  The first time, D3 empty remains same I selects values D1 and D2, but when I EndModal (1) and then come back, D3 has values.
  
  What is going on?
  
  What is the solution for this scenario?
  
  Thank you for your help in advance.

  Yes, this seems ok, as D3 is dependent on the key high level D1 and D2 and you delete all lines, which leaves a new line empty.
  I thought that if you select auto on on your grid values of D1 and D2 should automatically be copied at level 1.
  If this isn't the case, it has no harm to set these values as you.

  Note that this will change the buffer and the user receives a message that the changes have been made and if the user want to continue or go back and save.
  So a DoSave() somewhere in your code would be nice.

• Try using the drop-down selection list but is a different

  Hi all
  
  ILO, at a loss, what I'm doing wrong here. Trying to change a field (previously in the textfield) a menu drop-down selection list. All works except one. Looks like a multidirectional selector, even if I put the type in the List select
  
  
  http://i.imgur.com/Hz7tP.PNG
  
  Had no idea of what I need to do to change from falling. Thank you very much.

  You set the height = 4 for the element. You're the problem.
  Make the height = 1.

  Kind regards

• drop down button list in jdeveloper, adf 12 c

  Hi all!

  I can some post post a link to the tutorial from scratch, where all tables are falling down the list button and users can choose and they can add the new field in the example of table.for I have a table for PC with id, version, pc, operating system name. Thanks in advance

  Manolis

  First tell us your version Jdev

  Your condition is not not enough clear are you trying to create the row in the DB table based on the drop-down list selection?

  If so create viewObject for all tables and show all the table name in the drop-down list
  then just to get the value of drop down and create row in this viewObject

  Assume that departments is selected in the drop-down list, then you can get and create row in departments ViewObject

  {if(dropdownValue=="Departments")}

  ViewObject vo = getDepartmentsVo ();

  Line r2 = vo.createRow ();         Creates a new line in ViewObject

  R2.SetAttribute ("DepartmentId", 001); You can set all the values

  vo.insertRow (r2);

  }

  Even, you can do for your tables create a PC, etc.

  Ashish

• No Image - Pull Down Menu list with Image

  Hello.
  
  I use Pull Down Menu list with Image (measure 1). but when I run the app I can't see any image. Here is the link to my app
  
  [http://apex.oracle.com/pls/otn/f?p=49167:1 | http://apex.oracle.com/pls/otn/f?p=49167:1]
  
  Sagar

  Hello Sam,.

  If you change the model from the list "Drop-down Menu with image" images appear.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/

• The drop-down the counting button... NO CellRenderer...

  I finally had time to count my QNX components, and as I suspected the drop down (that I have left to the last) is the only component to give me problems when it comes to counting.

  Has anyone successfully scraped the Drop Down button with the arrow?

  I came close, but I get this weird behavior where, when I click on the button while the menu is developed, I can see drop down the default button.

  Here are a few screens:

  Don't not clicking the button of dd:

  

  By clicking on the button of dd:

  

  Here is my code:

  brushDropDown=new CustomDropDown();
  brushDropDown.setListSkin(CustomDropDownCellRenderer);
  brushDropDown.setButtonSkin(CustomDropDownButtonSkin);
  brushDropDown.setBackgroundSkin(DropDownBackgroundSkinBlack);   brushDropDown.setBackgroundSkin(DropDownBackgroundBarSkinBlack);
  
  public class CustomDropDownButtonSkin extends DropDownButtonSkinWhite
      {
  
          /**@private**/
          protected var upSkin1:Sprite;
          /**@private**/
          protected var selectedSkin1:Sprite;
          /**@private**/
          protected var disabledSkin1:Sprite;
          /**@private**/
          protected var downSkin1:Sprite;
  
          public function CustomDropDownButtonSkin()
          {
              super();
          }
  
          override protected function init():void{
  
              super.init();
  
              upSkin1=new Sprite();
              upSkin1.graphics.beginFill(Colour.YELLOW);
              upSkin1.graphics.drawRect(0, 0, 170, 50);
              upSkin1.graphics.endFill();
  
              downSkin1=new Sprite();
              downSkin1.graphics.beginFill(0x333333);
              downSkin1.graphics.drawRect(0, 0, 170, 50);
              downSkin1.graphics.endFill();
  
              disabledSkin1=new Sprite();
              disabledSkin1.graphics.beginFill(0xCC0000);
              disabledSkin1.graphics.drawRect(0, 0, 170, 50);
              disabledSkin1.graphics.endFill();
  
              selectedSkin1=new Sprite();
              selectedSkin1.graphics.beginFill(Colour.ORANGE);
              selectedSkin1.graphics.drawRect(0, 0, 170, 50);
              selectedSkin1.graphics.endFill();
  
              setSkinState(SkinStates.UP, upSkin1);
              setSkinState(SkinStates.SELECTED, selectedSkin1);
              setSkinState(SkinStates.DISABLED, disabledSkin1);
              setSkinState(SkinStates.DOWN, downSkin1);
              showSkin(upSkin1);
          }
      }
  

  I noticed that DropDownButtonSkinWhite (extending my CustomButtonSkin) has already selected skin assigned to it that I can't replace... I can do false visible, who hide assets by default... but that does not help me...

  Does anyone found a workaround for this? Thanks in advance...

  Hey,.

  the count is rough - we will essentially blind lol. Here are the States in the drop down menu you need to cover including the ones you already have:

  setSkinState(SkinStates.UP, upSkin1);
  setSkinState(SkinStates.DOWN, downSkin1);
  setSkinState(SkinStates.SELECTED, selectedSkin1);
  setSkinState(SkinStates.DOWN_SELECTED, selectedSkin1);
  setSkinState(SkinStates.DISABLED, disabledSkin1);
  

  Good luck!

• Dynamic effects of HTML like Drop Down the legend and the body does not

  I use TC 2.0, soon to be upgrading to TSC 3.0.  When I try to create Drop Down Caption and Drop Down body elements in FrameMaker and Robohelp update, it does not work.

  I have the text as:

  Drop down menu test legend

  Which I note and go to the Adobe RoboHelp-> DHTML Effects-> menu Drop Down Caption and apply the style of paragraph DropDownCaption to.  I then text like:

  Test menu drop-down body

  Which I pointed out and go to the Adobe RoboHelp-> DHTML Effects-> menu Drop Down body and apply the style of paragraph DropDownBody to.

  I update my Robohelp project (related to my project of FrameMaker) and get a 'clickable' of Test Drop Down legend which I click and Interline additional just pop-up. My Test drop down of the body  text is still there, doing nothing.

  You mind, I can do this in RoboHelp directly without any problems, but then I have the problem of update of the project of FrameMaker and that it get rid of all my work of RoboHelp project. Is it possible to get this working in FrameMaker?

  Please check if there is an empty paragraph between paragraph style Drop Down the legend and the paragraph with the style of Drop Down Body in the FrameMaker document. For RoboHelp, to recognize the link between the two, Drop Down body paragraph must immediately follow the Drop Down Caption paragraph. Avoid any empty paragraph between the two.

  MILIN

• Select the list with doSubmit ('SAVE')

  Dear members,
  
  Please do not kill me for that matter...
  
  I use APEX 2.1.0.00.39 delivered with XE. What I need is a list of selection within a form region indicating the content of a source LOV which is a column of data. If the select list is replaced by another value, it should initiate a doSubmit ('SAVE').
  
  I tried the list with submit - did not work. I tried to change the STI to a selection list and:

  HTML Form Element Attributes: javascript:doSubmit('SAVE');

  But both times the result I have the same thing: when I change the select list of another element, the form is committed, but after reviewing it, the original of the select list item is selected again...
  
  What I am doing wrong?
  
  Best regards
  Johann

  Hi Johann,.

  The parameter must be defined:

  onchange="javascript:doSubmit('SAVE');"
  

  What are the parameters of complete Source, you have for the item? You use any calculation a process on the question?

  Andy

• With the help of Interaction of the user as a drop-down selection list

  When my workflow running I want to select a host, then get my list of data warehouses available on this host of VcO

  I am able to create an array with the names of data warehouses (arry/String) but when I try to switch to an intervention of the user I am not able to populate a drop-down list with values of my table

  Can someone point me in the right direction

  Thank you

  Found the issue

  1. in the presentation definition defined a property 'list predefined elements.

  2. in field put a hashtag in front of the variable containing the array of strings

  example #valuesToSelect

• Where is the drop down the arrow next to the button previous and following which has provided a list of previously seen web pages?

  before firefox 4.0 as I could go directly to a page, several pages back by clicking on the drop down arrow, then click on the address of the desired site. I must now click on the back button again and again until I reached the desired site. What a pain! lack of this feature alone makes me want to go back to version 3.6XXX

  You can get the menu drop-down by clicking on the previous/next buttons or now the left key pressed until the list is displayed.

  If you want the drop-down arrow, you can add it with the add-on of dropmarker rear - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

• Populating a drop-down menu form with the values from MySQL database

  I'm creating a simple CMS that will allow staff to add new items on their site (sale of furniture).

  I want them to be able to choose from the list of values for some fields to ensure that the items are displayed on the website correctly (IE to avoid typos etc.).

  I have spent a lot of time to trawl forums and have so far obtained the code below.  When it was working I could only get the dropdown menu options of data contained in the database, as opposed to the list of DEFINED values that initially, I would put in my database.

  For example under the field named 'Type', I assigned these values: all ('table', 'chair', 'buffet', 'convenient', 'bottles', 'library', 'mirror', 'drawers','s chest', 'display', 'tvunit', "bedside", reads, "wardrobe", 'dressingtab', 'blanketbox', 'Office', 'filing cab', "workstation")

  Here's what I want to display in the drop-down, not only the five values of elements already in it.

  However, my CMS page is nothing display now not in the drop down and I can't understand why not!

  So my question is, first of all any ideas what's wrong with my code?  And second, how to fill the bottom of the fall with SET values?

  Thank you very much in advance for your help!

  I didn't want to bore you, then the code below is just the bit that is relevant to my question, rather than any connection $POST and info php etc.

  It is in my code php at the top of my page

   $sql = mysql_query("SELECT DISTINCT id, supplier, room, type, material, finish, bespoke, image FROM furniture ORDER BY ASC");
  
                      while($row = mysql_fetch_assoc($sql))
                      {
                  $supp .= "<option value=\"{$row['supplier']}\">{$row ['supplier']}</option>";
                  $room .= "<option value=\"{$row['room']}\">{$row['room']}</option>";
                  $type .= "<option value=\"{$row['type']}\">{$row['type']}</option>";
                  $material .= "<option value=\"{$row['material']}\">{$row['material']}</option>";
                  $finish .= "<option value=\"{$row['finish']}\">{$row['finish']}</option>";
                  $bespoke .= "<option value=\"{$row['bespoke']}\">{$row['bespoke']}</option>";
                      } 
  

  It's in my html code

  <form action="<?php echo $editFormAction; ?>" method="POST" enctype="multipart/form-data" name="form1"  id="form1">
  
                  <label for="supplier">Manufacturer</label>
                  <select name="supplier" id="supplier" title="<?php echo $row_add['supplier']; ?>" >
                    <? echo $supp; ?>
                   </select>
         
  
                   <label for="room">Room</label>
                  <select name="room" id="room" title="<?php echo $row_add['room']; ?>" >
                    <? echo $room; ?>
                   </select>
  
                         <label for="type">Type</label>
                        <select name="type" id="type" title="<?php echo $row_add['type']; ?>">
                         <? echo $type; ?>
                        </select>
     
  
                        <label for="material">Material</label>
                        <select name="material" id="material" title="<?php echo $row_add['material']; ?>">
                        <? echo $material; ?>
                            </select>
         
                            <label for="finish">Finish</label>
                        <select name="finish" id="finish" title="<?php echo $row_add['finish']; ?>">
                          <? echo $finish; ?>
                            </select>
     
                         <label for="bespoke">Can be made-to-measure?</label>
                         <select name="bespoke" id="bespoke" title="<?php echo $row_add['bespoke']; ?>">
                        <? echo $bespoke; ?>
                        </select>
  
                                <input type="Submit" name="Add" id="add" value="Add" />
                        <input name="date" type="hidden" id="hiddenField" value="<?php echo $todayis['date']; ?>">
                        <input type="hidden" name="MM_insert" value="form1" />
                        </form>
  

  > So, don't you think not with my different approach?

  Yep, that's how it should be done.

  Note the OP also mentioned that they are filled with 6 drop-down lists:

  > 6 fields I want to post, drop downs in my a form are: provider, room, type of material, finish and custom.

  So you can create a table for each separate... but what I would probably do is store everything in a single table (depends of if you need to store additional information or if it's just a list of choice):

  optionsTbl

  Category ID value

  ------------------------------

  1 provider abc

  2 vendor xyz

  3 living room

  4 dining

  Enter values using a set of multiple records in the query: Select value of optionsTbl category WHERE = 'suppplier. " Select the value optionsTbl category = "room"; etc.

  Then fill the drop-down lists by looping through each query in the recordset and use next_result() to perform a loop on the next game.

• Drop-down menu used with anchor on the long table of data links

  Hello

  I have a page on our site where we used a drop shape with anchor tags to let the visitor easy access to specific locations within a long table of data on the same page. Recently, I noticed that the anchors are walking around is no longer the tags in the page but only the beginning of the table anyway. I don't know if over time a few additional codes may have been added to the page that is not in conflict with the form of drop down menu, or if it's something else. I've been agonizing about this for awhile now and unable to fix. I'm hoping a new set of eyes will revisit the issue. the url is http://www.vectron.com/products/saw/saw.htm

  Thank you

  Looks like there are a good number of errors html on this page, some of them have to do with using the code of the named anchor.

  Looks like you have placed the anchors between the openingand the child of the opening. Content cannot go there, move them in theTags and see if that helps.

  It could be something else however, html errors are one of the main causes of the problems of display/functionality. Visit the validator to http://validator.w3.org to clean up your errors. If you work with the code clean and correctly positioned anchors, after return and we can take a closer look.

• How to add the drop-down filter list in a dashboard button/menu

  Hi all
  
  I created a custom dashboard related activities, but I don't know how to put the drop down filter the list (for example, exercise & fiscal month) on top of the dashboard as Pipeline analysis (report SOD predefined) as well as the button 'Go '.
  Clues?
  
  Thanks in advance

  Hello!

  In the page analysis of the design, you must create a new dashboard guest.
  Go to Design Analisys, select a report type (doesn't matter which) e.g. addresses of account (1).
  Then on the top left of the page, you will see 3 icons, and the third is new dashboard fast....

  Once you have created your command prompt, you can save it as the other reports, and you can add it to your dashboard.

  I hope this will help, do not hesitate to ask for more!

  Max

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result