Where to find an original driver/firmware for duosense screen (HP Tx2?)

Well, I'm having a problem.

Just got my tx2, and given that the computer was delivered inflated my taste with the trial software (and I really wanted to try real multi-touch capacity) I deleted the hard drive and installed the beta version of windows 7 32-bit.

I installed the drivers for duosense ntrig (which also included a new firmware, unknown to me at the time and enjoyed improved support of touchpad compared to the firmware/drivers group, but I also lost pen holder.)

Want to back pen holder, I reinstalled my own copy of vista, but much to my dismay, the screen no longer works properly, because of the new firmware.

The button is very bouncy (it's very inaccurate, and if I highlight something and hold the button, the parameters of what I chose shake them.)  In addition, the pen still does not, because of the firmware.

Anyone know where I can get a copy of the original firmware for the duosense screen?  My laptop is now paralyzed until I can find the original firmware, or a newer driver comes out for windows 7 that supports stylus.

Thanks in advance.

Message edited by heyman421 02/03/2009 07:55

OK, here you go.

1. reinstall or log in to windows 7 (I had it ona separate hard drive)

2 install the software with firmware NTrig package

3 here is the kicker! You must go and install this: http://www.microsoft.com/downloads/details.aspx?FamilyID=32bc1bee-a3f9-4c13-9c99-220b62a191ee&DisplayLang=en

This is why it would not uninstall before.

4. once who installed go for program files, ntrig, driver and click on NtrigFwRb.exe and run as an administrator. I don't know if it does nothing, but well, here are the steps that I follow! Laughing out loud

5. run DPInst in the same folder and it say uninstall. It should tell you its remove the firmware.

6. go into Device Manager and remove all the HID drivers.

7. check hardware and sound and hardware options Ntrig should have disappeared.

8 to make a full system recovery in windows vista.

TADA! You have your back multitouch. HP told me they wanted me to pay to put in the firmware that was not allowed. Forget it.

Tags: HP Desktops

Similar Questions

  • Re: Satellite Pro L40-135 (PSL43E) where to find the audio driver XP

    1. I had downgraged Vista to XP.
    Does anyone know where to find the audio driver for this model?
    Different is no driver package for this sub-modell (135)

    2. What is with the update of BIOS for PSL43E compatybile with installing XP

    Hello

    It seems that XP for the Pro series don t L40 PSL43E drivers exist on the Toshiba page at this time. I have found that the BIOS!
    So what to do? : |

    Either you will wait until pilots which will be released in the next time you go try some drivers since the 3rr example sites page of Intel.

    Integrated sound card should support the chip Intel High Definition Audio (Azalia) ADI AD1986A.
    Maybe this might help a little.

    With regard to the BIOS; Well, the BIOS 5.10Win was published on the page of Toshiba and it s a XP BIOS version. This BIOS is necessary if you want to use the MS XP OS on this Vista laptop.

    Good bye

  • NB100-11R - where to find the original version of BIOS?

    Hi all,

    after flashing the original default BIOS 1.10 at last 2.10 BIOS, my netbook have a big problems with ubuntu 9.10, the blocking and frezee, touchpad do not work on listening and with very low sensitivity setting. The pc is unusable!

    I have re-flash with 1.60 the old bios I found. and I put a new ubuntu 10.04! now the touchpad works fine but the pc has new small frezee... my work pc better than with the original bios?
    Where to find the original bios? I hope that the version 1.10...

    Thank you.
    Best regards and I'm sorry for my bad English...
    Max

    Hi maxresti,

    Normally you can download the latest version of the BIOS. This means that you won't find any older versions on the Toshiba site.

    To get the old version, you should contact a service provider authorized in your country. Guys can reflash the old version in a few minutes.
    On the Toshiba site, you will find a list of them where they are.

    Good luck! :)

  • Low volume after installing several different drivers. Can not find the original driver to reverse the effects

    Hello. First of all, thank you for taking the time to read this message. I'll try and add all the valuable information that I can. However, if you would like more information to help solve the problem, please let me know. So a few weeks ago, I noticed that my audio was very distorted (as you know that your laptop does when you work it, the sound the sound). I downloaded the driver HD audio Realtek, made sure it was updated to help with the distortion. Well, then the volume become too low. I continued install audio drivers Realtek HP, remove all devices from realtek (under sound, video, game in Device Manager controller), passing through updates on internet, etc., but nothing works. In addition, I have gone from reading devices (under the volume in the taskbar icon), by selecting My speakers, go to the properties and selecting improvements and selecting "Loudness Equalizer." So far, which helped a bit. My volume is now 100% and it looks like he did when he was 20% (when there is no problems).

    Unfortunately, I do not know how long this problem has persisted, and I don't think that there is a restore point before that time to try to reverse the effects. Is it possible that I can find the original driver delivered with this laptop? Currently, I went to Device Manager > Sound, Video, game controller, Realtek HD Audio, update > Browse > let me pick > choose the driver earlier.

    Any advice would really be welcome

    Hi @kendrat0,

    Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. Thank you for sharing the details of the problem. I want to help you.

    If I understand correctly the audio quality is lower than expected and need a solution.

    (Correct me if I'm wrong, and I thank you for the details)

    Could you please provide me with the product number of the PC? If you don't know how to find this information, please click here for more information.

    I have a few steps, you can perform to resolve the issue: remove audio drivers & reinstall the original drivers update Audio drivers on the official website of HP for windows 10 (click on the changes on the top to switch between the BONES).

    Increase the volume on the playback device settings after you set your speaker as the default device. For more steps, follow a similar post on the HP Forums: click here

    Perform a hard reset

    * Reset the BIOS default

    * Run the test Audio of Diagnostics of material for the PC HP (UEFI)

    * Update the BIOS

    * Reset your computer

    Perform a recovery of the HP system

    I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!

    If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
    If you like my assistance, please click on the thumbs up icon.
    The two icons are below this post.

    Kind regards

  • Where to find the best AE tutorials for beginner?

    Where to find the best AE tutorials for beginner?

    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  • Satellite L350 - where to find the latest driver for graphics card?

    I have a Satellite L350.
    I installed a game (EVE online) and it works as it should; However when I use alt - tab, the game crashes.
    It is not supposed to do this, and on the other PC it does not crash.

    I contacted the technical support for the game itself, and after reading my dxdiag, they concluded that it was because my drivers are up to date.

    They said specifically the graphics and audio drivers are the cause of the problem.
    I have a Mobile Intel (r) 4 series express chipset family graphics card, and the driver is dated 06/12/2008.
    my sound card is realtek audio and is dated 11/02/2006.
    I tried to update the graphics card on the site of intel, but the program tells me the installation was not validated for this computer and I had to contact the manufacturer.

    Anyone know where to find the updates compatible with computers laptop toshiba?

    Yours sincerely,
    LTA

    Hello trouble

    Please remember you have laptop and not of office. What you have done is just and it will help with the office, but on laptops, the situation is very different.
    Graphics card is suitable for the use of the laptop by Toshiba and downloaded driver from the manufacturer of the graphics card can not be installed.

    As you know probably common problem with laptops is heat and temperature of the material must be controlled. Graphics card too high temperature can ends with overheating and book cut or damage the equipment. Toshiba laptop to protect material must ensure on the pilots and don t allow to run on the limit.

    I must also say that your laptop is not game machine.

  • I can't find the latest driver ATI for Tecra A7

    Hello
    I have a problem and I hope someone could help.

    I have an ATI Radeon X 1600 in my book and I need the latest driver for it, but the driver which is located on the site of ATI don't like my computer, and he indicated that he could not install on my computer. I think that there is not supported computers laptop toshiba. And I could just found a driver what version number is 8,292 and his since 2007.
    Can someone tell me a site or something where I can find a newer driver for my computer? Or other options...

    Thank you
    Andrew

    Hello

    As you say the Tecra A7 was equipped with ATI M56P(256MB) ATI Radeon X 1600 graphics card.
    I discovered that the Satellite A100 PSAA9E and Satellite Pro A100 PSAACE were equipped with the same driver

    To verify the version of the driver that is designed for both series of books above.

    Good bye

  • Satellite A60-672: where to find a display driver?

    Hi all

    can't seem to find the drivers to display for the Satellite SA60-672 (model No. PSA60E - 02Z02P7Y), it's an ATI mobility Radeon 7000, but all the drivers I downloaded do not work, anyone know where I can get the drivers from?

    Kind regards
    uk_rules_ok

    Hello

    Have you checked the page of the Toshiba driver?
    Here, you can choose the Satellite A60 and you will find the display driver.
    It s an ATI and it should work properly.

    Please note: you must use the display of the Web site form driver and note of Toshiba, the graphics card manufacturing site!

  • Satellite L500-1DT - where to find the audio driver?

    Just reformat the laptop, went from windows 7 64 bit for windows 7 32 bit. Reformatted the disk that came with the laptop. I have no sound at all, the sound worked perfectly before and it keeps saying that I have no sound card. I tried to install the audio drivers but I can't find the right on the site with my model.

    I have a satellite L500-1DT with model PSLSOE.

    Tried to install the drivers available and I just get an application error after installation

    no idea how to fix it or where to find the correct drivers?

    Thank you

    Hey Buddy,

    To be honest I n don't know what problems you have with the driver audio but that's in the right place for all drivers:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    Laptop > Satellite > Satellite L Series > Satellite L500 > PSLS0E

    But before installing the latest version, remove the current version first and clean the registry with CCleaner

    Check this box!

  • I would like to know where I can get the right firmware for my CD/DVD burner

    I WOULD LIKE TO KNOW WHERE TO FIND THE GOOD FIRMWARE FOR MY CD/DVD BURNER

    I WOULD LIKE TO KNOW WHERE TO FIND THE GOOD FIRMWARE FOR MY CD/DVD BURNER

    Hello

    You will need to contact support for the manufacturer of the device or the computer manufacturer if the device was preinstalled on the computer.

    Concerning

  • Where can I get the driver/software for Satellite A500/02J disc

    Hello

    Newbie here, just want to ask, are there at - there a driver/software for laptop Toshiba A500/02J disc.
    I just bought a new and its been not formatted, so no recovery partition where drivers would be.

    I searched the net looking for face recognization software, etc., but nothing works.
    There must be a drive to install there somewhere...

    Can someone help a newbie?

    Concerning
    Carl

    Hello

    The laptop has not been handed over with the recovery disk because there is a pre-installed tool called Toshiba Recovery Disk Creator.
    This software could create the recovery disk that allows the laptop to factory settings still.

    By the way; Satellite A500/02J is an Australian for Toshiba laptop model and drivers must be available on the Australian Toshiba page:

    http://www.MyToshiba.com.au/home

    Welcome them

  • Re: Satellite A300-1MT: where to find the WLan driver?

    Hi all.

    I bought Satellite A300 1MT to May 12, 2009.
    After the first round on, installated Windows Vista.
    Device Manager is equipped with a device of ininstalled one with the name "Ethernet card", but the wireless network card no.

    I am in charge of the drivers from the toshiba web site. But all the drivers fits.
    Can you advise advise something?

    Thank you

    Hello

    Have you tried to install the Atheros WLan driver?
    As far as I know, it should be the right one because of my knowledge the Atheros Wlan card has been installed in this unit.

    Please see the Toshiba WLan Portal:
    http://APS2.toshiba-tro.de/WLAN/

    Here you can find the driver Atheros for Vista!

  • Satellite L350 - 16 M - where to find the new driver Intel?

    I get blue screen all the time, and the 'Windows problem report' tells me that it is a problem with the Intel display driver but I can't find a new driver.

    It's the 'Windows problem report' it's in Norwegian:

    Beskrivelse
    And problem videomaskinvaren med til at Windows sluttet fungere riktig mate pa a strong.

    Problemsignatur
    Problemhendelsesnavn: LiveKernelEvent
    OS-versjon: 6.0.6002.2.2.0.768.3
    ID for nasjonal innstilling: 1044

    Spinning som beskriver problemet (solarly spin er kanskje ikke lenger tilgjengelige)
    WD-20090224 - 0706.dmp
    SysData. XML
    Version.txt

    Screw en midlertidig kopi av disse filene
    F: If and virus eller en annen sikkerhetstrussel forarsaket problemet kan apning av en kopi av skade datamaskinen filene.

    Ekstra feilinformasjon om problemet
    BCCode: 117
    BCP1: 86069008
    BCP2: 8E218070
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1
    Serverinformasjon: e7902ddf-dd9e-4598-ab67-33e52c7a66c8

    Hello

    The report of Windows problem in Norwegian isn't useful. It would be better to translate in English. ;)

    Anyway, you can get a new display on the page of Toshiba driver:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Maybe he can solve your problem and make sure that all Windows updates are installed.

  • I have a Compaq Presario V6000 Widescreen and I can't find the video driver just for this computer

    I can find the video driver for my Compaq Presario V6000 Widescreen

    Serial number: {Private Information Removed}

    There are 4 computer V6000 but I don't know which one should I use.

    I use my serial number and the model name and the PIN code and still cannot very well the video driver.  can someone tell me were fined the pilot to be used on window XP

  • Where to find the correct SHA1 checksum for the upgrade Pro Windows 8 ISO?

    I ordered the Windows 8 Pro upgrade online.  (not a preview but the new product on 26/10/12).  I downloaded and burned the ISO of the English version of the Windows 8 ISO file.  I'm assuming that 64-bit. This took place without incident.  I started the upgrade on a PC running Windows 7 SP1 64-bit, but it failed during the installation phase of Windows 8 to 72% with the error "installing Windows 8 failed".

    So I restarted the upgrade and it has not exactly in the same place (72%) and the same cryptic error.
    So I contacted the Microsoft Store and they helped me to go through the process of downloading a 2nd time.  The 2nd ISO file was exactly the same size, BUT it had a different SHA1 checksum!
    Then I tried the upgrade using the new DVD burned in the 2nd ISO file and it failed at exactly at the same stage of the upgrade (72%).
    So I got two corrupt downloads / Burns?   I have no way to tell because all I know is that they have different amounts of control.
    Maybe they all are both wrong, or maybe the question is something else entirely.
    But first things first.   How can I determine if my ISO file is correct?
    What is the checksum SHA1 of a non-corrupt ISO file?    Where to find the information online?

    I have the same problem with my 64-bit windows English version.

    I created a bootable DVD from iso and started to install a clean install by formatting the hard drive.
    Installation will be stuck at 17% and it happened to me like 3 times and I burned a fresh DVD and always the same question.
    It's like the worst level ever... Is there a way I can download an iso of 64-bit bootable DVD and use it to upgrade?

Maybe you are looking for

  • Movement of backup itunes

    I want to move my itunes backup everything from an old computer (under windows) to another computer (Windows) with an external HARD drive. Can I do this?

  • HP Pavilion Notebook: AccelerometerST.exe Application error on my NEW computer laptop

    When I started this morning, I got this error- AccelerometerST.exe (0xc000007b) application error - could not start properly. Click OK to close the application. I see all the other posts about this error, but they were all of those who have updated f

  • When you use Windows Installer error, "network resource is unavailable.

    Get message this feature I'm trying USDE on an unavailable network resource id.  Proposed file is on C:\Users\***.  Can't find any help on the support. Microsoft.com. I use Windows Vista Home Premium SP2 32 bi.  I tried the system restore, but that d

  • unrecognized hard drive.

    I have a hard drive with windows vista home premium, but it does not start and don't want to be recognized by the pc. what I would do. Sometimes it shows when I use it as a slave, but when I'm looking inside, it desapears from my computer.

  • Internet Explore crashes and 'control alt delete' does not

    Occassionly, while using Internet Exporer 9 he hangs up and does not respond. The cursor can act irratically and I am unable to get Vista to meet the "control of Alt Delete" only restart by power restorations of my system.  I don't remember these que