drop under a movieclip target

Similar Questions

• Drag and drop - moved outside the target object

  Hello

  It's my first drag and drop object.  It went pretty well except for nitpicking a few things.  I'm hoping to get help on one of these.

  A sample of my screen is below.  The basic idea is that you drag one of the words in the dotted box, and I'll give you a sound feedback, whether good or bad.  I'm tiling the answers and this is my question.  Sometimes, if I already have one correct answer in the box and drag each other directly on the existing answer, he'll put it on the side and it seems that it is in the next box.  An example is below.  This happens very rarely, but I still want to go to the bottom of it.  I resized the boxes, made the smaller font and I reduce the size of the response when he goes inside the box.  But it still exists.  If they hang out below the existing response response then it works fine.  Does anyone know what is the answer?  I have the screen below, as well as the settings of the target in the example below that.  any help would be greatly appreciated.  Thank you!

  

  

  That's the problem with tiling. You can reduce the size of drop even more (90%), try one of the other options in the second row of tiles. Or choose absolute, which means that it has no real alignment, control, but text will stay where the user puts.

• getting dropped under heavy load of iSCSI LUNS

  Hello

  
  I found a few forums on this... but not a response yet.

  I have a Hp Lefthand 4300 cluster for the storage, connected to 2 x DL360 G7 ESXi 4.1 via iSCSI (Hp edition) guests and a Procurve gigabit switch dedicated for iSCSI. Whenever I run a backup down the LUN for a few seconds (usually 5, however it was as much a minute).

  Things, I tried...

  Updated software from the left to the latest version

  Updated all the HP firmware on the hosts

  Update to the latest drivers HP Boradcom on ESXi hosts

  Changed the timeout 1400 (esxcfg-advcfg - s VMFS3/14000/HBTokenTimeout)

  These servers come into production in the new year... Please please can someone help me solve this problem?

  I call open with Vmware and HP, nor was particually useful, Vmware has suggested I called HP and updated card drivers NETWORK, HP simply said that it was a network problem and closed the call... Thank you!

  I intalled surveillance under tension and can not see all ports dropped etc. All the equipment is new and the LAN cables are Cat6.

  Don't really know where to go from here!

  The exact error I get is...

  Lost access to the volume (4cf7b1ac-5fdcc218-5c2e-1cc1dee48e30)
  S1 - SP1OS) because of connectivity issues. Recovery attempt is in
  progress and results will be announced soon.
  Info
  2010-12-27 01:06:06
  192.168.32.2

  Please help me!

  Kind regards

  Kris

  We have recently changed some hosts who also had problems on a heavy load with iscsi San connections. We used hwiscsi (TOE), Broadcom adapters (was a recommendation from different vendors) before and this has recently changed to swiscsi (with Jumbo).

  No. dropped / resets on connections over this host. And a much faster flow of vm (tested with IOmeter).

  We also saw a much beter performance (throughput) on hosts with NIC configured to swiscsi on comparisation of hosts with an iSCSI HBAS (Qlogic 4062).

  We use VMware ESXi 4.1 (latest patches).

  Problems with broadcom TOE (hwiscsi) on HP DL360G6 also on Dell M610 blades.

  SAN: EqualLogic PS5000 PS6000, PS5500, PS6500,

  Switches: Juniper weer Jumbo Frames and flow control.

  So I recommend you also use swiscsi on these broadcom adapters.

  If you are looking for broadcom issues with vmware, find others with similar experiences.

• Drag and Drop 2 objects 1 target

  I'm relatively new to Flash and try to create a drag and drop.  I followed the tutorial here (http://monkeyflash.com/tutorials/flash-drag-and-drop/). A change that I made this tutorial was having the object disappear when it is deposited on the target.  By following these instructions, I was able to build a drag and drop of an object to a target successfully.  My question is what do I do if I want to have several items to go to the same target?  For example in the tutorial that happens if I added a second square object and both wanted to go to a target square.

  Any help would be greatly appreciated!

  As long as the target is always available as a target, you can drag to as many objects as you want (one at a time).  To help do that, when you drop an object on the target and make disappear, either to do this object fall go far (removeChild (dropped)) so that it does not block the path or move the target above the object dropped (addChild (target)).

• LabVIEW 2011 f2 [x 64]: no drop-down menu of "Targets" in the "Getting Started" window

  Is this normal? I don't remember if selection "Targets" was there at the start, but it isn't here now! I installed the Module, the Module 2011 WSN 2011 Vision and ARM 2011 Module and their icons appear on the startup initialization screen, although there is no ARM Module screws present in the ADE.

  If it's a bug, what should I do to fix?

  Thanks in advance,

  I guess as 64-bit LabVIEW 2011 is not compatible with these modules, they will not fill the list started with targets.  If they appear correctly in 32-bit LabVIEW 2011, it is most likely the problem.

  Brian

• Edge Animate: Detect if the 5 elements are dropped on their targets and display a message "Bravo."

  I was hopgin this would be pretty simple, but must still find a way to do it, or a tutorial that covers online.

  I initially followed the tutorial video of Paul Trani for drag / drop objects on a target, which is really userful, ()Drag and Drop in edge animate part 2: Multiple with Touch - YouTube)

  Now, I want to add code to detect the moment where all points are interrupted on their targets, and then show a simple "well done" text or graphics. That I had a post on StackOverFlow for about a year now without a valid answer.

  Thanks Resdesign, it is more useful

• Drag works fine, drop does not work.

  Hello

  I am new to AS3 and I'm having a problem with drag and drop, with more precision the part of gout. I tried a few different tutorials and I tried to have objects called on the stage of the library, as well as on the stage itself when it starts. Dragging works well but the subject never came out when the mouse button is.

  If someone wouldn't mind have a look and perhaps pointing out where I'm wrong, I would appreciate it.

  Code below.

  //co-ords of objects on stage
  
  sky.x = 0
  sky.y = 0
  ground.x = -14
  ground.y = 252
  seeds.x = 760
  seeds.y = 30
  wateringCan.x = 550
  wateringCan.y = 20
  
  
  // Function to determine where the hole will spawn - almost 100% certain it wont spawn above the ground
  RandomlyPlaceObject(hole);
  
  // Random placement function
  function RandomlyPlaceObject(objectToPlace: MovieClip): void {
    // Controls for where spawn can be
    var xMin: Number = 50;
    var xMax: Number = stage.stageWidth - 50;
    var yMin: Number = 350;
    var yMax: Number = stage.stageHeight - 50;
    //Math to determin location of hole spawn
    objectToPlace.x = xMin + (xMax - xMin) * Math.random();
    objectToPlace.y = yMin + (yMax - yMin) * Math.random();
  
  
  }
  
  
  //Drag and Drop time
  
  
  var circles: Array = [seeds, wateringCan];
  for each(var seeds: MovieClip in circles) {
    seeds.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
    seeds.addEventListener(MouseEvent.MOUSE_UP, dropIt);
    seeds.startX = seeds.x;
    seeds.startY = seeds.y;
    wateringCan.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
    wateringCan.addEventListener(MouseEvent.MOUSE_UP, dropIt);
    wateringCan.startX = wateringCan.x;
    wateringCan.startY = wateringCan.y;
  
  
  }
  
  
  function pickUp(event: MouseEvent): void {
    // no longer need to keep track of startX & startY here because that's already been done up above
    event.target.startDrag(true);
    event.target.parent.addChild(event.target);
  }
  
  
  function dropIt(event: MouseEvent): void {
    event.target.stopDrag();
    // check to see if the event target is touching hole using hitTestObject
    if (event.target.hitTestObject(hole)) {
    event.target.buttonMode = false;
    event.target.x = hole.x;
    event.target.y = hole.y;
    }
  }
  

  use:

  1. Co-ordsofobjectsonstage
  2. Sky.x = 0
  3. Sky.y = 0
  4. Ground.x =-14
  5. Ground.y = 252
  6. Seeds.x = 760
  7. Seeds.y = 30
  8. wateringCan.x = 550
  9. wateringCan.y = 20

  1. Functiontodeterminewheretheholewillspawn-almost100% certainitwontspawnabovetheground
  2. RandomlyPlaceObject (hole);
  3. Randomplacementfunction
  4. {functionRandomlyPlaceObject(objectToPlace:MovieClip):void}
  5. Controlsforwherespawncanbe
  6. varxMin:Number = 50;
  7. varxMax:Number = stage.stageWidth - 50;
  8. varyMin:Number = 350;
  9. varyMax:Number = stage.stageHeight - 50;
  10. Mathtodeterminlocationofholespawn
  11. objectToPlace.x = xMin + (xMax-xMin) * Math.random ();
  12. objectToPlace.y = yMin + (yMax-yMin) * Math.random ();
  13. }
  14. DragandDroptime
  15. var dragged_mc:MovieClip;
  16. varcircles:array = [seeds, wateringCan];
  17. foreach(varseeds:MovieClipincircles) {}
  18. seeds.addEventListener (MouseEvent.MOUSE_DOWN, pickUp);
  19. seeds.startX = seeds.x;
  20. seeds.startY = seeds.y;
  21. wateringCan.addEventListener (MouseEvent.MOUSE_DOWN, pickUp);
  22. wateringCan.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  23. wateringCan.startX = wateringCan.x;
  24. wateringCan.startY = wateringCan.y;
  25. }
  26. function pickUp(event:MouseEvent):void {}
  27. nolongerneedtokeeptrackofstartX & startYherebecausethat'salreadybeendoneupabove
  28. stage.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  29. dragged_mc = MovieClip (Event.currentTarget);
  30. event.currentTarget.startDrag (true);
  31. event.currentTarget.parent.addChild (event.currentTarget);
  32. }
  33. function dropIt(event:MouseEvent):void {}
  34. stage.removeEventListener (MouseEvent.MOUSE_UP, dropIt);
  35. dragged_mc.stopDrag ();
  36. checktoseeiftheeventtargetistouchingholeusinghitTestObject
  37. {if (Event.Target.hitTestObject (Hole))}
  38. event.target.buttonMode = false;
  39. Event.Target.x = Hole.x;
  40. Event.Target.y = Hole.y;
  41. }
  42. }

• Captivate 8 Drag and Drop several legends of text for your comments

  Hello

  I am creating an interaction with an element with which the learner can drag for four different images representing the different categories of data classification.  The idea of the interaction is for the learner to discover each of the four different categories, by trial and error.    I want them to provide comments through text captions that the answer is right or wrong, but each piece of comments will be different and the user should be able to drag the item several times until they found the right answer.  I can't fwork how to do this.

  I just upgraded to Captivate 8 week last, after having previously used Captivate 5.   Therefore, I've never used the installation drag - d├⌐poser and I don't know if he's going to do what I'm trying to achieve or if it's something I could achieve with shares advanced instead, or if it is not possible to do. I tried searching for similar topics, but either did not understand the answer or scenarios seemed different.  I don't really know where everything is still 8 Captivate, and while I have used certain actions in Captivate 5 tip, I'm not that comfortable with them, so simple is good.  The interaction doesn't have to be reported on.

  Is anyone able to help me please?

  Thanks in advance for your help.

  Hello

  According to my understanding, you have a source element that can drag and drop on 4 different targets (different images). For every drop of a sort of legend should appear on stage the feedback to the corresponding user from the target source. (Correct me if I'm wrong)

  This can be achieved with Drag and drop interaction.

  1. Insert the source 4times and overlap each other (since you can drag and drop 1 number 4 times, you must have this element to work as a source of slippage 4 up to 4 items).

  2. make the 4 elements as drag source and group them into a single type. (With the help of add option)

  3. you have your 4 images on stage and Mark as targets of drag.

  4. Insert the rear power legends and put them near their targets. Disable their 'Visible output' flag on Bill pro forma.

  5. now match the Correct ANS on stage.i.e of one of the source type to a target correct years.

  6. Select each target and open their box "Actions of the object". (from Panel drag / move)

  7. uncheck the ' accept all the ' option and the value of count 1. Add the action of 'travel' to show their legends of Feedback now under Drag source Type. (which were hidden). This should be through "Advanced Actions.

  8. now after for each target open the dialog box 'Good years' drag and drop the Panel. (it will be under options and so visible from the source or target is selected)

  9. here under the table, you can see that the value of count is 4. This is to reduce the value to 1. (double-click to change)

  Interaction is now ready. Please don't answer if that's what you wanted to achieve and if you do all the steps above.

  Derrick

• Drag and Drop in Flash?

  I can't seem to

  Get the correct script?

  Can someone let me know if it's the only incorrect script or naming my movieclips etc...

  Basically, I want several of the film clip ankles to drag and drop and align objectives... I'll be to the image of the call on top of the target Center, but I moved it goes to show that I had created the targets.

  Any help is greatly appreciated.

  FIRST OF ALL... How can I attach the zip file?

  Kylie

  I just tried the last piece of code you show and was able to successfully drag - move an object on its target and told to try again to drop on a wrong target.  Thus, the code seems fine.  If the problem may lie in how you name things.

  If you named your buttons one_mc, two_mc, etc. and then according to your code, target names must be... targetone_mc, targettwo_mc, etc...

  If I was a player I would probably bet that you've named the targets... target_one_mc, etc... or at least bet that you do not have named them as they should be.

• Action Script 3 Drag & Drop

  Hello

  I've been following a Lynda tutorial to generate a simple drag and drop game in Flash CS5, using ActionScript 3 and met with what I'm sure that someone will be a simple problem to solve. I got to the stadium where I have video clips 10 and 10 on _target areas to drop these clips, they then snap into the right area.

  My problem is that I have a meter running in the background that counts the number of correct conversions; what I want is when all 10 points fell in the right zone (_target relative), a line of Action Script will be executed, now for this example, I would like to bring the Alpha of a textfield/clip on 0-1 scene, showing a message of victory.

  Here is my code so far, I use external classes for the process of what drag / move.

  The grid class:

  package
  {

  import flash.display. *;
  import flash.events. *;

  
  Grid/public class extends MovieClip
  {
  var dragdrops:Array;
  var numOfMatches:uint = 0;

  
  public void Grid()
  {
  the constructor code
  dragdrops = [moneya moneyb, moneyc, moneyd, moneye, moneyf, moneyg, moneyh, Anil, moneyj];
  var currentObject:DragDrop;
  for (var i: uint = 0; i < dragdrops.length; i ++)
  {
  currentObject = dragdrops [i];
  currentObject.target = getChildByName (currentObject.name + "_target");
  
  }
  }
  
  public void match (): void
  
  {
  numOfMatches ++;
  if(numOfMatches == dragdrops.) Length)
  {
  HERE, it IS WHERE I want TO PUT the ALPHA CODE
  }
  }
  
  }

  }

  Class DradDrop:

  package
  {
  import flash.display. *;
  import flash.events. *;
  
  SerializableAttribute public class DragDrop extends Sprite
  {
  
  var origX:Number;
  var origY:Number;
  var target: DisplayObject;

  public void DragDrop()
  {
  the constructor code
  origX = x;
  origY = y;
  addEventListener (MouseEvent.MOUSE_DOWN, drag);
  buttonMode = true;
  }
  
  function drag(evt:MouseEvent):void
  {
  stage.addEventListener (MouseEvent.MOUSE_UP, drop);
  startDrag();
  parent.addChild (this);
  }
  
  function drop(evt:MouseEvent):void
  {
  stage.removeEventListener (MouseEvent.MOUSE_UP, drop);
  
  stopDrag();
  
  If (hitTestObject (target))
  {
  Visible = false;
  Target.Alpha = 1;
  Object (parent) match ();
  }
  
  x = origX;
  y = origY;
  }

  }

  }

  Any help would be great.

  use:

  package
  {

  import flash.display. *;
  import flash.events. *;

  Grid/public class extends MovieClip
  {
  var dragdrops:Array;
  var numOfMatches:uint = 0;

  public void Grid()
  {
  the constructor code

  
  dragdrops = [moneya, moneyb, moneyc, moneyd, moneye, moneyf, moneyg moneyh, Anil, money j];
  var currentObject:DragDrop;
  for (var i: uint = 0; i< dragdrops.length;="">
  {
  currentObject = dragdrops [i];
  currentObject.target = getChildByName (currentObject.name + "_target");
     
  }
  }
   
  public void match (): void
   
  {
  numOfMatches ++;
  if(numOfMatches == dragdrops.) Length)
  {

  Use a dynamic textfield you can assign an instance name (for example, tf) and use:
  TF.alpha = 1;
  }
  }
   
  }

  }

  Class DradDrop:

  package
  {
  import flash.display. *;
  import flash.events. *;

  SerializableAttribute public class DragDrop extends Sprite
  {
   
  var origX:Number;
  var origY:Number;
  var target: DisplayObject;

  public void DragDrop()
  {
  the constructor code
  origX = x;
  origY = y;
  addEventListener (MouseEvent.MOUSE_DOWN, drag);
  buttonMode = true;
  }
   
  function drag(evt:MouseEvent):void
  {
  stage.addEventListener (MouseEvent.MOUSE_UP, drop);
  startDrag();
  parent.addChild (this);
  }
   
  function drop(evt:MouseEvent):void
  {
  stage.removeEventListener (MouseEvent.MOUSE_UP, drop);
    
  stopDrag();
    
  If (hitTestObject (target))
  {
  Visible = false;
  Target.Alpha = 1;
  Object (parent) match ();
  }
    
  x = origX;
  y = origY;
  }

  }

  }

• Target FPGA. help with sbrio 9631

  I am trying to connect to the analog I/o of my sbrio 9631. I'm trying to follow this video http://www.youtube.com/watch?v=q3-WGrnVnxM

  37 seconds, his project menu has two folders under the fpga target call anolg input and output analog. When I look at my project menu I don't have these files. the single folder target fpga for me is e/s on board. I use the same sbRIO as in the video. Any ideas? the attached pictures are of my project and its menu.

  
  

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• Captivate 7 Drag and Drop issue

  I'm trying to create a drag & drop with a correct target and six items of your choice. Three correct answers and incorrect three. I would like to have three elements fall in, while the three should not. My problem is that I can't Captivate to "reject" the three incorrect when dropped into the target... I'm sure it's something simple, and I'm right on it. Anyone have any ideas?  Thanks in advance!

  You will need to check that if the target is configured to accept only made good drag sources. Select target, click the object in steps (Format tab). By default it is configured to accept all, uncheck the bad drag sources.

  

• Drag and drop interaction failure captions

  I have a drag and drop interaction with a target drop and drag several objects. Slip that one object is the right answer. When the learner moves an incorrect object drag the drag target I want a legend of failure - which is quite simple. However, I want a capture of failure for each of the objects dragged badly so that there is another explanation for why each item is indefensible. Then I need a legend of success for when the object correct drag is dragged to the drop target.

  Is this possible?

  Hi Jay,.

  Yes, could create such a scenario, but the button send is not used in this case, because the feedback will appear immediately when a drag object on the target. Is it OK?

  Here the workflow:

  • In addition to the object, set all comments container of text you need, correct and incorrect and label them so that they are easily recognizable. I scored FB_1, FB_2... because my objects were decline.1, Drop2...
  • Make these initially invisible feedbacks and group them in Gr_FB
  • Create drag & drop in the normal way with a correct link
  • Select the target and in the in the Panel D & D, click the button I agree to change the settings like this
    
  • Advanced actions are fairly simple, standard, with two instructions: Gr_FB hide and show FB_n (with the container of appropriate feedback - you cannot use Shared actions in this dialog box).
  • In the D & D Panel, choose infinite for the number of retries and uncheck the legend of failure.

  Lilybiri

• How to build a drag and drop multimeter lead using Flash animation?

  I'm building a virtual multimeter to test simulated circuits. I would like to be able to drag a lead animation test multimeter to a circuit point and drop it on a target. The static drag and drop is not my problem. I would like some suggestions on how I can animate the movement of the head itself. Any suggestion would be appreciated.

  you want something to "follow the mouse", but do not be dragged?

  If so, use a loop (enterframe) and facilitate the position of the object with the mouse:

  Object.x += speed * object.x +(1-speed) * mouseX;