getting dropped under heavy load of iSCSI LUNS

Similar Questions

• Disables the killer wireless 1535 under heavy load

  I just received a brand new 15 R2 in the mail a few days ago and have had any other problems with the wireless. It works very well under normal load IE internet browsing or streaming videos. When I try to download a game on steam or push the signal degrades slowly until the wireless card turns off. Then, you cannot activate the card via the hardware switch or click with the right button to enable. Any ideas? See the reference video.

  cs_setInnerHtml ('video_5eed075f-5174-43dd-b4cf-997c702184ea', ");

  I uninstalled all the software/drivers killer, deleted the drivers and reinstalled the drivers Slayers of the killer and dell Web site.

  Alienware has finally got resolution. They came and replaced the 1535 with an Intel AC 8260 killer. I'm going on two days with zero problems and more than 100 GB downloaded on my 5 GHz network to nearly 15 MB/s, which is what my internet caps to. Kudos to Alienware to send to the Intel card the next day. There he sent Tuesday of this week and the technician was home Wednesday afternoon. So far so good. I hope that Killer will solve questions 1535 a Windows 10 and 5 GHz, but unfortunately with imminent deployment, I have not time to wait for her.

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• P620 turns off randomly during heavy load

  Hello!
  
  I've had my computer since 2007/2008 now and I have came across a problem of dust. I cleaned it and it worked fine again. After I had finished, I moved my computer one meter or more. A day later when I curled the computer, everything was fine, I had a game running in the background. But when I came back, my computer has been cut, so I thought that my roommate turns off the computer. Didin't there do! Later when I started again, I came to the Startup Repair. I curled the computer, but when I came back, you guessed it: it was closed. I asked my roommate again and there still didin't make. Later, I used a live cd of Ubuntu to the backup on my hard drive computer internet. When he was done, I started the process of re - install my computer. Until I clicked on the button reinstall, I tried one last time. It worked! So he came with a "computer didin't work properly' or something. The resan was BlueScreen. So I tried to open the minidump file, but my programming program expired, so I couldn't open it. LARGE. Later, my computer said that it had no internet and icons started disppearing. It seemed that the hard drive has begun to be unloaded. I clicked on the icon and BOOM internet! My computer is turned off. No reset. Right next door. I feel this only when it is under heavy load. And I knew just the effect "unload" 2 times. Other times, the screen goes black and the power light is still on for like 5 seconds and then shut the computer completely, it also occurs on the effect "unload"!
  
  Computer:
  Model: p6320sc
  If you want more, ask me.
  
  Thank you for your time.

  Hello GAsplund

  I'm sorry to hear your computer is overheating, but I think I can help you. I provide you with a link to a paper support HP here "reduce heat inside the PC to prevent overheating" to help reduce the heat so that your computer stays on.

  I hope this helps solve your problem of overheating and here to thank you for the post on the HP Forums have a great day!

• How to get the runtimename of the Monday using iscsi LUNs

  Hello

  IIS there a way to get the name of length of scsi LUNS being given the lun id?

  For example, please take a look at the attached capture where I want to get the identifier (identifier of naa) in view of the number of LUNs, say 11 (the first line of the snapshot)

  Thank you!

  That you will get the link between the identifier and the Monday

  Get-VMHost MyEsx |
  Get-ScsiLun |
  Select CanonicalName,
      @{N="LunID";E={[int](Select-String ":L(?\d+)$" -InputObject $_.RuntimeName).Matches[0].Groups['LunID'].Value}}
  

• Retrieve iscsi LUNs

  Hello

  I have an iSCSI LUNS presented via OpenFiler to host ESXi 4 (standalone).  For some reason, the host has lost connectivity to the LUN and, of course, the virtual machines that were running.

  I reboot the host which did not help.  I can see the device THAT LUN is presented with success under the section of storage card from the vSphere client.  When I run through the Add Wizard storage, in the storage section, the disk is visible.  However in the next step of the wizard it ends by crashes with an error message "unable to get disk partition information.

  I don't want to just reset the partition table, and re-create the file system I want to retrieve the LUN and virtual computers that it contains.

  Any ideas?

  Thanks in advance,

  Richard

  Did you find anything in the newspapers of the OpenFiler? You have more than three LUNS on the OpenFiler? If so, this logic unit number could be a different LUN then what you think it is? Is there a chance that there is a windows or Linux machine that could have this locked LUN? Or you configured permissions so that those LUNS is available for this single ESXi host? The ESXi host for some reason any seems to think that this LUN does not contain a VMFS partition. The OpenFiler there snapshots of this LUN?

  If the ESXi host can see the LUN, I'd start looking for storage and see if you can find configuration problems there.

• Stream access to the ISCSI LUNs on esxi v4

  Greetings,

  Wonder just anyone could throw me some lights on it?

  Esxi v4 does support stream access to a single lun? The reason behind this is I want to consolidate LUN based on roles (exch, file, etc.), that is to say, a lun (datastore) will host all the servers exch only running on different hosts.

  Thanks in advane.

  Felix

  Hello

  Yes No... multi host access to iscsi LUNs is possible... that's what san / storage isa he's shared on the subject. Just make sure that Suur iscsi luun u plan on using is in the list compatibilityy supported so that u get the support of vmware in the future if you need. ESX / ESXi have a clustered file system.

  TM

• How to use a larger than 2 TB iSCSI LUN?

  I have a server ESXi (4.1 U1) connected to an iSCSI NAS network, where 4 LUNS have been defined and presented to this host. all LUNS are 3 TB in size. ESXi correctly sees the LUNS and recognizes their size 3 to.

  I know that the maximum size for a VMFS data store is 2 TB, so creating a single data store for each logic unit number would be a waste of space. I know also that the creation of multiple data on a single LUN warehouses is not recommended, and it does not seem work either: If there is already a data store on a LUN, the just vSphere Client won't let me create something else here, it is not even list it in the list of available devices for the creation of data warehouses.

  I know that I can use extensions to create a store of data from more than 2 TB, but it seems to work across multiple LUNS: when I try to increase the size of a data store using the same logic unit number where he resides, ESXi is trying to increase it in fact, it won't go above 2 TB in size.

  My question is: is it possible to combine two extensions in the same logical unit number, so actually creating a composed of 2 extensions 1.5 TB 3 TB data store?

  If this is not possible, is it possible to create two data warehouses in the same iSCSI LUN? I know that this is not recommended, but it should at least be possilbe... but looks like it's not.

  If this is not possible, then... How to make use of these 3 to LUN?

  You can carve up the LUN and then it recombine.

  How to use these LUNS 3 TB is to get rid of them and the re - present as< 2tb="">

• Extend an iscsi LUN without losing VM

  I created originally for my data store a 500 GB iSCSI VMFS LUNs. I noticed that I had more available SAN storage, so I increased the size of 500 GB to 1.3 TB LUN LUN for our VMWare data store. I currently have a VM DC on this LUN I want to thank. When I go to the store and add the extension, it is said that the drive will be formatted and all data will be erased. There is a host of ESXi v3.5. What is the best way to extend this LUN without losing my VM domain controller?

  Should I try to move the virtual machine to the internal storage using the browser to store data? What do I have to use VMWare Converter to move the virtual machine off the iscsi lun until the LUN is extended, or is there another way? With your recommendations can also provide you with exact to directions?  It is a production environment, and I don't have a lot of experience, make this type of move.  Your comments are greatly appreciated.

  Hey Monty,

  One thing to remember, whenever you play no matter what sizing such thing w.r.t. the LUN always take relevant backup and can do what you want to play. The error you get is the error for the new extend this when adding, all the data on the new measure will be lost, so certainly, you can spend without any hestations.

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Is anyone else having trouble getting the CBSsports App load for the Super Bowl?

  I'm trying to get the application to load and it keeps loading and loading up to the point where he goes to the standby screen. I would like to watch the game and it becomes very frustrating

  Yes. We look, in the middle of the national anthem and he went down. Still load do not.

• What should I do to get the rundll error load it says this c:\windows\system32\swwagui.dll, but when I search it he says that it excist doesint

  What should I do to get the rundll error load it says this c:\windows\system32\swwagui.dll, but when I search it he says that it excist doesint

  yeremis,
  You don't need to download the help file.  So just follow the steps described in this article, that it will guide you through performing a clean boot.  The boot will start Windows without other programs startup.  This should stop any program that tries to use swwagui.dll.  Then you can go back and turn on startup one items at a time to determine which type of program is causing the problem.

  If the error persists while in a clean boot state then you should try a restore of the system forward when the problem started. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found

  Whenever I start my computer, I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found. Anyone know what this means? Help.

  Moved from Vista devices and drivers Forum.

  Hello

  Google has no information on this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• All my intenet and aid programs have uttorents logo and when I click on them I get an UNABLE to LOAD "chrome.exe": torrent is not valid bencoding.

  Original title: darn utorrent

  I was download uttorent breast hurt and I went to run the file and it asked me to associate what ibwanted file to start the game with. I clicked on uttorent by chance and now all my intenet and aid programs have uttorents logo and when I click on them I get an UNABLE to LOAD "chrome.exe": torrent is not valid bencoding. It does this with microsoft word and all the intenet. How can I fix this so I canbuse my computer. There is also a school computer so I don't have administrative privileges.

  Hi CMAC.

  As mentioned in the previous post,, AJ McTide , it is not recommended to download pirated apps.

  In dealing with the problem with the opening of applications, try the suggestions of this link.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  https://support.Microsoft.com/kb/950505?WA=wsignin1.0

  Important: Follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Thank you.

• I get the message cannot load the configuration settings whenever I try to download Adobe Reader

  I get the message cannot load the configuration settings whenever I try to download Adobe Reader

  Try to download the adobe reader Offline Installer.

• Get message unable to load XPCOM trying to start applications

  Original title: unable to load XPCOM

  I get the message "Unable to load XPCOM" on several applications and they launch.  Couldn't find anything on this site to help on this.  Anyone know the fix?

  Hello

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  You get message unable to load XPCOM trying to run some applications.

  XPCOM is Mozilla-related.

  To work with the issue, I suggest to uninstall Mozilla Firefox and check if the problem persists.

  To uninstall a program:

  a. press the Windows key + W

  b. now, select applications if it is not selected

  Hit and c. Type appwiz.cpl enter and uninstall the program from the list.

  If the issue is not persistent, then to work with the issue, I suggest you to post a query in the Mozilla support forum.

  You could try to get assistance for the Mozilla support forum:

  http://support.Mozilla.org/en-us/KB/get-community-support

  For any question related to Windows, feel free to contact us.