Drs host group management and the vm

Similar Questions

• How to get around the Startup Manager and the black scree at startup

  tried to deactivate the boot manager of arise to stat upward by going to advance settings and put the 'the operating system display list' to zero. However, the Boot Manager always appears at the star for a few seconds and then the screen goes black and possibly windows vista starts. What can I do to work around the Boot Manager and the black screen at the star to the top? I tried the system recovery option, but it didn't work. Can someone help me?

  Thank you

  Hello

  I suggest you to see link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-default-operating-system-for-startup-multiboot

• How to get a handle to the window to screen using just group id and the id of the window?

  Hello

  We are trying to develop a video application, and we use ForeignWindowControl to display the video on the screen.

  We have those ForeignWindowControl declared and defined in a QML file that appears as needed.

  Using the CameraAPI, we are able to get local video displayed correctly on the local video ForiegnWindowControl. For this we have just the window group id and the id of the window api camera and it automatically configures the window newly created by the camera to the position API and the size defined in the QML file.

  However, this is isn't the case with the video remotely. Since there is no method/function similar to the createViewFinder of the camera api, we need to create a new window of ourselves that goes under the Group shared by the ForeignWindowControl remotely, using screen_create_window_type and set all the required parameters.

  To view the video, hard-code manually the position and size of the newly created window so that it corresponds to the position and the size of ForeignWindowControl remote in QML file and is displayed correctly.

  My question is how to find the ForeignWindowControl using just the group id and the id of the window? the way in which the cameraAPi done in-house?

  Any help would be appreciated.

  Thank you.

  There are 3 ways to associate a window with a ForeignWindowControl.

  1 tell the ForeignWindowControl to expect a window with a given windowId.  Then after that libscreen allows you to create your window with the same windowId, use screen_join_window_group() to adhere to the same group that uses the FWC.  The FWC should automatically capture this event and associate the window itself.  This is how the camera it.

  2. call the bindToWindow() of the ForeignWindowControl method to associate the FWC a particular windowId/groupId.  Similar to the #1, but doesn't seem more useful if you create the FWC after the window of the screen has been created.

  3. call the setWindowHandle() of the ForeignWindowControl method.  Similar to the #2, but instead of using windowId/groupId, you spend just the actual handle.

  See the FWC docs:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__foreignwindowcontrol.html

  If you have created the window, you can use one of the 3 approaches.  If the window has been created in a different process (eg. mm-engine rendering, or photo-service device), then generally #1 is the approach you would use.

  See you soon,.

  Sean

• ESXI hosts 5-2 and the best way to configure vSwitch and Nic redundancy

  Hi all

  Could someone help me find the best way to configure the vNetwork on 2 5 ESXI host for redundancy.  Once I managed to correctly configure the 2 hosts I will seek to use the same installation process for 6 guests.  3 sites with 2 hosts on each site managed all of vCentre Server

  I have 2 DL380 G7 servers 5 ESXI installed on a class 10, 8 GB SD card, I'm looking to install VSA on the 2 hosts on each server with 4 TB of internal storage (8 * 600 GB 10 k SAS).  Each server has a gigabit integrated 4-port NIC and I installed a 2nd NIC gigabit PCIe 4 ports, I also x 2 16 switches of port with Layer 3 routing.  I use vSphere 5 Standard acceleration Kit I am looking to use vCentre server for managing, vMotion for maintenance, HA for the failover and VM 10/15 (vCentre Server Std, DB SQL to vCentre Server, Exchange 2010, SQL Server 2008 R2, IIS Intranet, Helpdesk, 1 DC, 2 Domain Controller, AV Server, WSUS, SCCM Server, and Terminal Server server).

  What would be the best way to install and configure the network for performance and redundancy and am I missing something?

  My thoughts are, Teaming: -.

  vCenter - vswitch0 - port1 on NIC1 and port1 on NIC 2 - port1 on NIC1 to physical switch 1 - port1 on NIC2 to physical switch 2

  vMotion - vswitch1 - port2 on NIC1 and port2on NIC 2 - port2 on NIC1 to physical switch 1 - port2 on NIC2 to physical switch 2

  HA - vswitch3 - port3 on NIC1 and port3on NIC 2 - port3 on NIC1 physics 1 - port3 on NIC2 to physical switch 2 switch

  VM - vswitch4 - port4 on NIC1 and port4on NIC 2 - port4 on NIC1 to physical switch 1 - port4 on NIC2 to physical switch 2

  or do I need an additional NIC on each server to hit the VM 12-6 VM for 2 ports on 2 NETWORK interface card, or maybe something else I missed?

  Thank you

  In your case, to keep it simple and what I can say here is what would be my recommendation:

  3 standard vSwitches

  vSwitch0:

  • Management - vmnic0, vmnic2

  vSwitch1:

  • vMotion - vmnic1, vmnic3

  vSwitch2:

  • VM network - vmnic4, vmnic5, vmnic6, vmnic7

  The only reason why that I didn't split the VM in other network adapters shipped is because the difference in the types of the DL380 adapter shipped and the PCIe quad.

• No Edge 15 Broadcom 802.11ac none hosted network management and stability problems

  I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter.

  The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, but the Dell Windows 7 driver supports hosted network supports. But on my computer with the latest driver 7.35.267.0 dated 05/14/15, supported network hosted shows no., which means that the pilot and the chip does not support.

  It seems that it's a driver problem and hardware supports hosted networks.

  Also, sometimes when I turn on my computer, the WiFi does not detect the AP. It's the continuous offshore. I can get the connectivity by deactivation and reactivation of the interface. A pain. Not a big pain, but pain. Looks like the driver reload or turn on the radio after that sleep does not work properly.

  Can Lenovo if you please provide a stable driver for the Broadcom chip work.

  Thank you.

  I ended up completely reinstall windows 10 and uses the stock drivers.

  No bloat ware lenovo. Works fine now.

• x 1 problem management and the supply of the carbon battery

  Hi everyone I x 1 carbon 3448

  in these 3 days, I have 2 questions:

  1. There is a warning sign on the right side of my battery meter tells me mya battery capacity is less than 50% of its original capacity.
  2. I can't open the power manager at all. even after the update today, it solves nothing.

  Please help now my laptop cannot survive 30 minutes without load

  You run Windows 7?

  Reinstall the power manager, and then run a battery meter reset.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• How to extract the selected ESXi host user name and the password in the web client of vSphere?

  Hi all.

  I'm developing a plug-in for the web client to vsphere. I want to communicate with the selected host of ESXi in my Java Service Layer and who needs the host user name and password.

  I don't know how to search the Flex user interface layer.

  ESXi credentials are not stored in the user interface layer, you must use the vSphere SDK Web Service on the coast of java.  See vim.host.ConnectInfo.

• 'group', 'link' and 'the NEST' - difference?

  You can group, link and test video clips on the timeline. The 'nest', one is the only one who really seems to do something similar to what I expect. Two groups and link do not seem to do a gosh darn thing!

  Clips of the Group

  Link and unlink audio and video clips

  Nesting sequences

  Premiere Pro CS5 - CS6 reference

  (12 MB .pdf download)

  http://helpx.Adobe.com/PDF/premiere_pro_reference.PDF

• CS5 does not record the group sizes and the directory structure

  I created a workspace with my specific parameters, but every time I open the default bridge structure of standard directories on the left (Favorites and computer, just those two) and a weird group sizes on the right side as I did not and I'm not leaving when I closed the bridge.

  CS5 on Windows 7.

  Any suggestions as to what this may be?

  You probably have the setting in preferences advanced, the value "launch Bridge on Login" uncheck as in this option, it will only save the changes he close bridge before closing the computer.

• Group By and the issue of the sum

  Is someone can you please tell me how I can get the ins_id to the group so that the dollar amounts correctly summarize? My SQL and outside current has set are listed below.
  
  

  Very well. What is the right formula?
  Sum (p.pur_quantity) * t.tic_rate

  Would be
  Sum(p.pur_quantity * t.tic_rate)

  return the same results / fix?

• ESXi 5, link group, VLAN and the Management Interface

  Greetings-

  I suspect that the answer to my question is: 'Buy an another NIC Intel' but here goes:

  I have a server ESXi here with 2 Intel GigE NIC, connected to the same switch managed ahead of Cisco.  A (vmnic0) NETWORK card is connected to the VLAN 200 while the second (vmnic1) is connected to the VLAN 300.  Ports on the Cisco are defined to access mode.

  Internally, the server ESXi, vmnic0 is connected to the 'public' vSwitch, while vmnic1 is connected to the "private" vSwitch

  I also updated the ESXi management IP 24 even as private vSwitch.  This is the key, I suspect.

  I tried to combine the two GigE interfaces in a connection unique 2xGigE and trunk two VLAN 200 and 300 through it.  After struggling through the menus on the ESXi console INTERFACE, I managed to get the IP management save and who responded and was able to connect to the server with the vSphere client.  I did it in X'ing the vmnic0 and vmnic1 in the configuration interface, then setting VLAN 300 in the configuration of VLANS.  But I could not the team/bundle correctly in the two vSwitches vmnic interfaces.  I could never attach a vmnic to one of the switches.

  Can I do all this with only 2 GigE interfaces and maintain access to IP management?

  SWITCH CISCO < == trunk w / VLAN 200 300 2xGigE == > SERVER ESXI

  VLAN 200 is a 28 audience

  VLAN 300 is a private 24 (for example: 192.168.100.0/24)

  IP management is 192.168.100.2

  I need to create a third VLAN for the management IP address and move?  If I master, say, VLAN 400 down to the ESXi server, use another block 192.168 for his IP address, I'll be able to take the vmnic0 and vmnic1 and team on the TWO vSwitches?

  Always follow me? ... :-)  If I can clarify this, by all means ask.  I apologize for the sort of random babbling here.  Thank you!

  JAS

  jasonvp wrote:

  Rickard Nobel wrote:

  You can not have your two vmnic (physical NIC ports) connected to two vSwitches and at the same time have a "grouping". You need to delete one of the vSwitches and recreate the vSwitch remaining trade. VLAN will insulate them even different networks.

  Thanks for the pointers; I finally had the opportunity to try this out and it works as expected.  I EF you the 'right answer' but apparently the forum won't let me since you already have an answer of "useful".

  Nice that you got it working! When you perform the actual configuration with vSwitch Hash IP and physical switch LAG config, it might be a little difficult to do things in the correct order to not lose connection to the ESXi host.

  You can select this message if you wish.

• Update Manager and the configuration of Virtual Center database = 1 database or the database even?

  We have a small environment VMware - 2-3 hosts, only 5-6 virtual machines for now, perhaps upward at 10-12 during the 2009 year.

  I looked at VUM and VC sizing spreadsheets and it seems I can do VC and Crossover work of SQL Express 2005 for 1-3 years, I need patch storage etc. and know that I may need to upgrade.

  VC and VUM facilities create their own separate databases or they are combined to form 1 data base?

  Or I would be better to buy 1 license Standard SQL with the 10 Cal instead? (I know that this would put the scale easily.)

  Thank you, Tom

  If you let the VC and VUM installers create the databases on the instance of SQL SERVER 2005 Express (named SQLEXP_VIM), it will create separate databases for each (VIM_VCDB for vCenter) and VIM_UMDB for the Update Manager. It is possible to have both of them use the same database, if you need to specify the database and ODBC settings in the installer.

  Hope that helps! Please, help me by marking my response as "useful" or "correct", if you feel it is useful!

  -Amit

• I use the vista sp2.the Task Manager and the registry editor has mysteriously disabled. How can I activate them?

  I am running vista sp2 and my task manager has been disabled by the administrator. I checked help and he said that I had to enable it via the registry. When I tried to open the registry editor, he said it has been disabled by the administrator. Well, I am the administrator and I've never disabled anything and I don't know how. Can anyone help.thanks

  I also discovered that I can not use the command either line. It is also disabled.

  Hi Mark,
  I know that you said you have linked the virus scanners, but this looks like an attack on your registry... or at least the dll that open your registry database.
  Did you go back with the restore points?
  Sounds like it might be time for a complete wipe and load (format).
  B Eddie