Drvice Manager /! ------next to NVIDIA nforce 10 / 100 Mbit/s Ethernet.Device cannot start Code 10
The product name and number:
HP Pavilion Dv9700
s/n [personal information]
p/n FE395UA #ABA
Operating system:
Windows Vista 64-bit
Current issue:
When I opened my device manager there are one /! ------next to NVIDIA nforce 10/100 Mbps Ethernet.
When I open its properties there is a message in the device status, indicating:
"This device cannot start. (Code 10) »
It gives me the ability to "Look for solutions", which proved to be unsuccessful.
Also, I installed the most recent driver.
Hello:
If uninstalling and leaving the NIC card get rediscovered and installed the drivers does not work, I recommend you install the nForce chipset driver for your computer that contains the ethernet drivers and see if that gets it.
Paul
Tags: Notebooks
Similar Questions
-
in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez
Hello
Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Is support NVIDIA nforce 10/100/1000 Mbps Ethernet #2 IPV6 network card?
Hello
I'm trying to set up a TCP/IP IPV6 based windows server & client on two different machines and for that I put in my systems for IPV6, but still i'm not able to ping : a which means a loop back itself but it gave error code 2 - in this case that means that my network card doesn't support IPV6...
Is this true?
Or if I do some mistake, go back. /...
Try the NVIDIA forums
Here is the Vista Forums.
http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx
Try the repost in the communities of server above.
They will help.
See you soon.
Mick Murphy - Microsoft partner
-
I have a sony vaio laptop model: model PCG - 71912L: VPCEH32FX
I went on the sony website and downloaded the driver and installed 4 times and still not a not detect.
I did all the updates and no results.
They just replaced my laptop screen and which could have been the cause of the problem, maybe it does not detect the new hardware.
Tried everything I could do so via Device Manager and nothing.
Please help, thanks.Hello
What is the brand and model of the webcam?
Method 1
I suggest you to run the fixit from the following link:Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 2
I suggest you to see the following link for the associated 10 error code.Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104 -
In Device Manager it says code 10 - this device cannot start (read message)
In Device Manager next to the icon for pioneer DVD - RW DVR-K17A Device, it has a yellow! triangle and when I click on it, it says this device cannot start code 10. I received the laptop in June and had not noticed the problem til now. When I followed the instructions for possbily install updated drivers/software I did but said that I am up to date.
Thank youFirst of all: what kind of machine do you have and what operating system is installed on your laptop? Without this information, no one would be able to help you.
Regarding your problem: I could check this site-> http://support.microsoft.com/kb/943104/ or check this document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=12&y=13 (I know, is not the error code of your question, but you can try anyway :))
Greetings
-
HP PAVILION ELITE M9517C DESKT: NVIDIA NFORCE 10/100 Mbps Ethernet drivers upgrade
I do a clean install for upgrade with Win 7 Pro 64-bit OEM. I ran the Win 7 Upgrade Advisor and need guidance on these issues, on what I need to do to upgrade:
NVIDIA NFORCE 10/100 Mbps ethernet
NVIDIA GeForce GT630
NVIDIA High Definition Audio
NVIDIA nForce System Management ControllerAre these extensible & will work with Win 7 Pro 64-bit?
Hello:
You will need this chipset driver in order to install the ethernet (NVIDIA NFORCE 10/100 Mbps ethernet) and most of the other devices you listed.
You should install this driver first and restart the computer before you install any other driver.
http://www.nvidia.com/download/driverResults.aspx/30520/en-us
According to the specifications of your model, it came with integrated graphics which means that you have added the video card.
So you will not find this graphics driver on your PC support page.
This is the latest driver for your GT630:
http://www.nvidia.com/download/driverResults.aspx/81877/en-us
-
Initially my HP a6683w said that nvidia network controller experienced pilot or hardwear related issues, then NVIDIA had me download something and then restart my computer to see if the internet was starting to work again. Now, I restarted the computer and is trying to say that the adapter NVIDIA nforce 10/100 Mbps Ethernet have driver or hardware related issues. I want to just my internet to work again. How can I fix it?
Hello
1. have you made no hardware/software changes before the show?
2. using an internet connection wired or wireless?
3. are you a specific error message while trying to go online?
Follow the steps mentioned below
Method 1: Restart the computer using safe mode with active network.
a. restart your computer.
b. When you see the logo of the manufacturer of the computer, press F8.
c. the display Advanced Startup Options , use the arrow keys to select Safe Mode with networkand press ENTER.
d. connect to your computer with an account of a user who has administrator rights.
Now check if you are able to connect to the network, if the problem persists, follow the next method
Method 2:
Follow the steps mentioned in the link and check with the question.
http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows
Method 3:
Download and install the drivers from http://www.nvidia.com/Download/index.aspx?lang=en-us link with the question checking.
It will be useful.
-
I upgraded Windows Vista 32 bit Windows 7 32 bit and the report Upgrade Advisor says I have the Nvidia nForce 10/100 Mbps Ethernet. The recomomended action is before installing Windows 7, go to the manufacturer's Web site to download the latest dirver for this device. After I installed Windows 7, install the registered driver.
I had no luck locating it on the Nvidia site, so any help in the search, it would be greatly appreciated.
Thank you
Hello:
You need this driver...
http://www.nvidia.com/download/driverResults.aspx/14874/en-us
-
- I'm upgrading from Windows Vista to Windows 7 and Upgrade Advisor says that NVIDIA nForce 10/100 Ethernet requires the latest version of the driver. The current driver is 67.8.9.0
- I can't find the detected on the NVIDIA site! It is the only action mentions Advisor.
Hello:
This is the 32-bit driver...
http://www.nvidia.com/download/driverResults.aspx/30521/en-us
-
I get this message whem check the computer Device Manager
Intel(r) management Engine Interface cannot start (code 10)
Thanks Ephraim
Please provide us with your administrative Event Viewer logs by following these steps:
Click on Start Menu
Type eventvwr in the find programs and files (do not hit enter)
Click with the right button on eventvwr.exe and click Run as administrator
Expand custom views
Click the administrative events
Right-click Administrative events
Record all events in custom view as...
Save them to a folder where you will remember which folder and save it as Errors.evtx
Go where you saved Errors.evtx
Make a right click Errors.evtx-> send to compressed (zipped) folder of->
Download .zip here (if you can) to skydrive or a file sharing service -
During an upgrade, the driver file has been corrupted, and I can't have access to the network via Ethernet. System driver is bad. Looking for where I can download the nvidia driver? It is not on the Compaq/HP website for my laptop. And not on nvidia web site or the other.
Thank you.
Hello, Jerry:
This should be the driver you need:
Paul
-
NVIDIA nForce network controller does not work after a clean install of Windows 7 "Code 10"
HP 6736nr
AMD processor, nVIDIA nFORCE Network Cotnroller (I wish there were more about HW than that)
Windows7 32 bit host
Wireless works fine.
For network LAN controller, Device Manager displays "Device cannot start Code 10". not useful as nVIDIA site
I need to find new drivers. Following hardware ID:
PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2
PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C
PCI\VEN_10DE & DEV_054C & CC_020000
PCI\VEN_10DE & DEV_054C & CC_0200
I tried to disable / enable, and uninstall and nothing works.
Thanks in advance.
Hello:
Normally, the chipset nForce Vista driver install the network card.
-
need driver NVIDIA GeForce 6150 SE and NVIDIA nForce 430
I can update this driver because I can't go back or get help from Nvidia\ and it seems that there are 2 pilots of different type from the Manager of devices for widows update instalation I don't know why NVIDIA GeForce 6150 SE and NVIDIA nForce 430 is what in my device manager and my control panel , it shows an another nvidia drver tha a ge force 6100 nforce 430. someone please help me with what I think if I resove this then it will update this driver can then I can update BOF IE7 and IE 8
Find you the driver you need?
SP2 is usually delivered via Windows Update
To find out if SP2 is already installed
- Click the button start , right click on computer and then click Properties.
If Service Pack 2 is listed in the Windows edition section, SP2 is already installed on your computer and you do not need to follow the instructions below.
You can install it manually using the link here
-
NVIDIA nForce Networking Controller problem.
In my "Device Manager" and on the tab "Network adapters", my NVIDIA nForce Networking Controller has a /! ------beside him.
Here is what it says under "device status". "This device cannot start. (Code 10)
I tried the 'check for solutions', but came up with nothing.
In addition, it said that the most recent driver is installed.
I don't know when it happened, but it's making my EQII. =(
____________________________________________________________________________________________________
Computer: HP Pavilion DV9700
OS: Windows Vista Home Premium / SP2
System type: x 64
Hello:
The only suggestion I can offer is to reinstall the nForce chipset driver that also installs the cable network controller driver.
-
Unable to connect to the internet, NVIDIA nForce Networking Controller issues
The NIC 'NVIDIA nForce Networking Controller' experiences driver or hardware problems... the message that I get when trying to connect to the internet.
In under 'Network adapters' Device Manager double-click your network adapter, in the, click the tab drivers, click on the button 'Disable', properties when disabled, click 'enable '.
You can also try the "Uninstall" button to uninstall. Then on the Action menu click on "Scan for hardware cahnges ' of the reinstall.
Maybe you are looking for
-
Satellite L50-c-215 is a laptop sold without optical drive or OS. We bought it today. Questions:-We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site-While watching the
-
Satellite Pro A120 - screen upside down
Hi all I have a toshiba satellite pro A120 and my son took his hand on the keyboard and now the screen flipped over any ideas on what I can do thank you very much...
-
I clicked on the Tivo pop-up window to close it. Looks like an old video game at first then just a mermaid constantly. Very annoying. This has happened Each time Firefox opened Yesterday is 21/05/10
-
Satellite L300 - problem reading memory in the slot/Bank 2
Hello.I have a Sattelite L300 with 2 * 1 GB memory which had strange problems of som.Among a large number of tests, I tested the memory inside.When there is a module of memory installed in slot/Bank 2 (the one closest to the bottom of the pc)I get an
-
I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-