The "NVIDIA nForce 10/100 Mbps Ethernet" network card is not properly configured to use the IP Protocol on my HP vista.

Similar Questions

• The 'Wireless Network Connection 3' network card is not properly configured to use the IP protocol

  I can't connect to any internet. I'm trying to connect to wireless hotspots, but it tells me that I am connected with limited access

  Hi idkmyname

   

  1. What is the exact error message displayed when you try to go online?
  2. do you have updated the network card drivers installed?
  3. What is the brand and model of the computer?

   

  Method 1:
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  You can also check the help links below-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Method 2:
  You can follow the steps below to check the NIC in Device Manager. I suggest you to uninstall and reinstall the NIC drivers and check:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  Check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  When you are prompted to confirm that you want to remove the device, click OK.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

   

  If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  I hope this helps.

• HP PAVILION ELITE M9517C DESKT: NVIDIA NFORCE 10/100 Mbps Ethernet drivers upgrade

  I do a clean install for upgrade with Win 7 Pro 64-bit OEM. I ran the Win 7 Upgrade Advisor and need guidance on these issues, on what I need to do to upgrade:

  NVIDIA NFORCE 10/100 Mbps ethernet
  NVIDIA GeForce GT630
  NVIDIA High Definition Audio
  NVIDIA nForce System Management Controller

  Are these extensible & will work with Win 7 Pro 64-bit?

  Hello:

  You will need this chipset driver in order to install the ethernet (NVIDIA NFORCE 10/100 Mbps ethernet) and most of the other devices you listed.

  You should install this driver first and restart the computer before you install any other driver.

  http://www.nvidia.com/download/driverResults.aspx/30520/en-us

  According to the specifications of your model, it came with integrated graphics which means that you have added the video card.

  So you will not find this graphics driver on your PC support page.

  This is the latest driver for your GT630:

  http://www.nvidia.com/download/driverResults.aspx/81877/en-us

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ethernet network card does not show my Satellite L830 - 16H

  Hello

  Ethernet network adapter do not show my Toshiba Satellite L830 - 16H, and it can not reset it

  What can you do to restore it?

  I thank everyone

  You can try to access the BIOS (turn the unit on and press F2) and set it to default and save the changes.
  Sometimes this help

  Otherwise, it can be device LAN card problem.
  The fix can be very expensive because such port is part of the motherboard.

  I think you can try using an optional USB LAN RJ45 Ethernet adapter

• Network card does not properly

  I just bought a Windows 7 HP Pavilion HPE with an Atheros AR8161/8165 PCI - E Gigabit Ethernet Controller. When I restart the computer, the network adapter does not work, I check the driver updates and they indicate that the driver of the card has the updated version. What should I do next?

  Joe C.

  Hey Joe,

  We can refer to this article and check if that helps.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Additional information.

  How can I troubleshoot network card? : http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems

  Thank you.

• HP Pavilion a6142n, 32-bit PC: need to update for Nvidia nForce 10/100 Ethernet Driver Version 67.8.9.0.

  I upgraded Windows Vista 32 bit Windows 7 32 bit and the report Upgrade Advisor says I have the Nvidia nForce 10/100 Mbps Ethernet.  The recomomended action is before installing Windows 7, go to the manufacturer's Web site to download the latest dirver for this device.  After I installed Windows 7, install the registered driver.

  I had no luck locating it on the Nvidia site, so any help in the search, it would be greatly appreciated.

  Thank you

  Hello:

  You need this driver...

  http://www.nvidia.com/download/driverResults.aspx/14874/en-us

• Drvice Manager /! ------next to NVIDIA nforce 10 / 100 Mbit/s Ethernet.Device cannot start Code 10

  The product name and number:

  HP Pavilion Dv9700

  s/n [personal information]

  p/n FE395UA #ABA

  Operating system:

  Windows Vista 64-bit

  Current issue:

  When I opened my device manager there are one /! ------next to NVIDIA nforce 10/100 Mbps Ethernet.

  When I open its properties there is a message in the device status, indicating:

  "This device cannot start. (Code 10) »

  It gives me the ability to "Look for solutions", which proved to be unsuccessful.

  Also, I installed the most recent driver.

  Hello:

  If uninstalling and leaving the NIC card get rediscovered and installed the drivers does not work, I recommend you install the nForce chipset driver for your computer that contains the ethernet drivers and see if that gets it.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3686683&sw_lang=

  Paul

• HP Pavilion a6540in: I can't find an update for NVIDIA nForce 10/100 Ethernet Driver Version

  • I'm upgrading from Windows Vista to Windows 7 and Upgrade Advisor says that NVIDIA nForce 10/100 Ethernet requires the latest version of the driver. The current driver is 67.8.9.0
  • I can't find the detected on the NVIDIA site! It is the only action mentions Advisor.

  Hello:

  This is the 32-bit driver...

  http://www.nvidia.com/download/driverResults.aspx/30521/en-us

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Just loaded windows 7 pro. Network cards does not

  Wrong shot network card works not.  Tonic concept 54mbps USB adapt with driver problems.  Need help

  Hello

  Check with the manufacturer of the USB adapter to the latest drivers. If necessary contact their
  supported.

  Conceptronic - driver
  http://www.Conceptronic.NET/Download.php

  Conceptronic - Service and Support
  http://www.Conceptronic.NET/support.php?action=init

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem with the Modem devices: Modem already used or not properly configured

  I use windows 8. Until last night, my laptop was working fine, but now it rejects all the modem devices, I try to plug it. I tried to connect to internet via Auntie photon and reliance netconnect +, but this message "Modem already in use or not properly configured" keeps on appearing two modem devices? Is there a problem with my OS or my laptop? Help, please

  Thanks for the solution.
  Well, my problem was similar but different too. The method to uninstall the modem device is correct. I tried, but still it did not work.
  My problem was that I have 3 different modems installed on my pc, but I used one of them. So I would uninstall only one I used. It turns out that we have to uninstall all modems. Its pretty simple, but its not so obvious. I thought about it later in like 2 days. I hope that people reading this don't have to wait 2 days to fix this problem.

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• Is support NVIDIA nforce 10/100/1000 Mbps Ethernet #2 IPV6 network card?

  Hello

  I'm trying to set up a TCP/IP IPV6 based windows server & client on two different machines and for that I put in my systems for IPV6, but still i'm not able to ping : a which means a loop back itself but it gave error code 2 - in this case that means that my network card doesn't support IPV6...

  Is this true?

  Or if I do some mistake, go back. /...

  http://forums.nvidia.com/

  Try the NVIDIA forums

  Here is the Vista Forums.

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Try the repost in the communities of server above.

  They will help.

  See you soon.

  Mick Murphy - Microsoft partner

• change the speed of the PC at 10 or 100 Mbps Ethernet link

  Hello

  I need to change speed Ethernet from the PC through program which is change the speed 10 or 100 Mbps.

  Is that possible, if yes, then please let me know the procedure.

  Or at least, I should be able to read the PC Ethernet speed in LabVIEW.

  Thank you

  You don't need .net 4.0 for this (.net 2.0 is pretty good) or anything else installed.

  I have attached a VI with control.

  PS: If you need to load assemblies .net 4.0 on to LabVIEW, you must follow the instructions in this link:

  http://digital.NI.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9