DryOffset - Direct laser engraving?

Similar Questions

• L50-B-137 - USB satellite feeds not Versa Laser Engraver

  Hello

  I'm having a problem, you can be able to help.
  I just bought Satellite L50-B-137 to replace my previous Tosh, who died a few weeks after 4 years of good and loyal service.

  However, the new laptop does not seem to be able to feed the laser engraver that I use with it.
  I tested the laser and all software associated with work on another machine and everything works fine, so it must be the laptop that is having problems.

  When I plug the laser in one of the laptop USB ports is not recognizing the device and after what this either, a few minutes to a few seconds, it switches off the laser engraver swtching machine off the coast (this is normal on a shift).

  I tried to change power-saving features and giving all delays ever but I still have the same problem.

  It seems to me that there is not enough power coming through USB to operate the laser.

  Any ideas?

  Thank you
  Acko.

  Did you test all USB ports, including two ports placed on the right side?

• The fonts in Illustrator are swoop for use with a laser engraving? If not, how do I convert a font for a single path... not an overview of the police?

  The fonts in Illustrator are swoop for use with a laser engraving? If not, how do I convert a font for a single path... not an overview of the police?

  "I try to avoid cutting each line twice.  This is double the cost.

  I hear you. I was there for more than 30 years.

  There are very few single line fonts. And most of the people is the property of specific burning software (i.e. the TTF or OTF fonts). Apart from these burning programs, what had to happen is for a foundry of fonts specifically design a single font. And, from what I've heard of these smelters (for the last 30 + years), the market is too small. I'm not saying that they are correct, it's just that it is their perception.

  Good luck

  -OB

• Direct laser with digital printer

  Hello

  I'm looking for a color all-in-one printer Laser capable of direct digital manufacturing. In our environment, we use Thin Clients and we do not want to install unnecessary software on our server, we need a printer that is able to scan from the printer directly to a network without software folder.

  Thank you and best regards

  Phillip

  Hello Philippe,

  Since the lines of consumer products, the only model Laserjet currently giving capablities digital archiving is the Topshot HP LaserJet M275, allowing to print, copy and scan capabilities:

  http://www.shopping.HP.com/webapp/shopping/store_access.do?template_type=product_detail&product_code=CF040A%23BGJ&JumpID=oc_R1002_USENC-001_HP%20TopShot%20LaserJet%20PRO%20M275%20MFP&lang=en&cc=us

  On the commercial side, you can find the HP Color LaserJet M375 and M475 models that provide capability to Fax in addition:

  M375:
  http://h10010.www1.HP.com/wwpc/us/en/SM/WF05a/18972-18972-3328064-12004-3328083-4337652.html?DNR=1&JumpID=oc_r1002_usenc-001&lang=en&cc=us

  M475:

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06b/18972-18972-3328064-12004-3328083-4337543-4337681-4337696.html?DNR=1&JumpID=oc_r1002_usenc-001&lang=en&cc=us

  In addition, there are additional commercial products that provide the functionality of digital archiving, but I guess you can find a better answer in the commercial forum below:

  http://h30499.www3.HP.com/T5/multifunction-and-all-in-one/BD-p/BSC-420

  Kind regards

  Shlomi

• How to remove a path element of in a group element?

  I'm generating and download of QR codes in vector format (.eps).  I use VB Script to place each QR code in an Illustrator document for later laser engraving as a batch.  Each QR code is composed of a bunch of small, individual places all filled locked in a single large transparent square.  Here is a sample of one of QR codes: http://laserfolly.com/2753.eps during the attack, control laser interpreter software the place enclosing outer such that it confuses the algorithm 'inside out', used to determine if a given path item should be engraved, i.e., it 'overflows '.  This causes some of the individual squares must be interpreted as not filled... even if they are.  If I delete the path square enclosing element outside then all right.  But there are hundreds of these codes in each batch... so it's prohibitive time to remove these outdoor places by hand.  Here is my request: anyone know how to use Illustrator scripting (I use VB) to identify this outdoor place and delete at the time where it is placed in the document in batch?

  Thanks in advance for any help you can give.

  Bob

  Gentlemen, thanks for the ideas.  You stimulate the following solution:

  myPlacedItem.Layer.GroupItems (1). PathItems (1). Delete

  I couldn't get to the GroupItems or PathItems directly through the PlacedItem object, but once I dove in the layer property... voila!

  Thanks for your help!

  Bob

• History of w / tied the series # path model to easily edit batch numbers

  Hey! I do a model of indesign for a client, that they need to serialize their product with a laser engraver and this template already made from the same file. What it is is a series of circles 56 - 1.1 "with 3 digits serial No. following the path of each circle. I'm going nuts trying to get it works but I can't do it! If it's a linked story I can just drag in a new batch of numbers and they will all be in the right place in 1 second! If she did not follow the path I would been have Twitter.com! I attached the file here, so you can see any help thanks! I explain this, I certainly hope so!

  http://binarydetroit.com/helpmeplz/

  A real pain in the neck, but doable. And I would like to make a document non-logged in and set up on the master page.

  I would start with a circle, then click with the type on a path tool (cilci the triangle at the bottom right of the text tool). Zoom in and use the direct Selection tool to adjust the inport and posts outport places desired and adjust the length of the text on the circle.

  Select the circle and use the notch and repeat to build grid.

  Click on the outport of the first circle, then click in the path of the second circle that has the text link. This should highlight the second circle, and you should see the thread inside the inport arrow. Click the outport and continue screwing the paths until the entire page is threaded.

  I had no luck with using the auto-flux for simply place my number from the list, so I chose my page and in the selected menu pages Panel override all master items. So I just set the text file and you click the cursor on the path or the first circle (without a modifier key). If you have more numbers than circles, add a page and repeat the master objects replace, then pick up the excesses of the last circle on the previous page and click on a new circle. I didn't test, but it might work to add several pages first, make substitutions, then placing the list by pressing the Alt/Opt to leave the cursor loaded for each page.

• best practices for sending files have client

  If a customer requests files... and they don't have Illustrator - but they want the orig for printers and publishers files, should I save the file using inheritance or just save a file of AI cs4 normal?

  THX.

  Chemol

  In this case, I would give them a file AI3. File format older you can save. They should be able to use it with almost any common vector editor. In which case they must use for laser engraving or some other CAD related stuff, it may be necessary for the test in different formats. In this case, you must contact these service people directly for test files.

• 2nd Z600 CPU installation

  I have a HP Z600 workstation with 1 x E5570 cpu.

  Can I install a 2nd type processor x 5570 on the motherboard?

  What is the difference between E5570 and X 5570, and if so, which is best?

  Thank you

  Caspian Sea

  The Z600 features of two processor on the motherboard ready to go, as with the xw6400 and the xw6600.  So, it is much easier and cheaper to add a second processor for the Z600 for a Z620 which requires a 'minimotherboard' separated to add to the top of the main motherboard before you can add a second processor.

  Here is information on the naming conventions names to the processors, to the low position for E vs X:

  /T5/workstations-z-series-XW-series/Z600-CPU-upgrade/m-p/6649124/highlight/true#M18367

  I saw the HP list some X processors as an E processor when Intel and the rest of the world as a x lists... follow the convention of Intel and the surefire way to know exactly what processor you have is to take off the heat, remove the Processor heatsink, clean it and check its code sSpec laser engraved on the top of the processor stainless steel cover.  You must at least be comfortable with this process before thinking to add a second processor.  Dough thermal costs for both is useful if you have two processors.

  Note the orientation of the processor before carefully remove you it... There is a corner triangular gold on it which is oriented to a corner of the plastic of the decision threshold, and you can see that, after that you turn to the top of the stainless steel on its hinge fixing.  After you have added the thermal paste very carefully put the processor down on delicate pins with it's interface.  I hold the processors North-South, not East-West... with North being the hinge of the hold down.  In lots of light here and note that tasks molded into the plastic of the socket to align with the edge of processor corresponding to tasks... together down gently, then check alignment, then close the hold down.

  X 5570 has a single code sSpec, SLBF3, and that should be easy to find. It's a max 95W TDP processor and you can buy new Intel for about $1400.00 USD today.  Or, for about $35,00 or even a little less off eBay.  I only buy used Xeons and had a bad on about 50, and the seller has sent a replacement free of charge.

  You want to match a heatsink / fan new / used eBay for what you have, and the part number will be on the radiator you have.  I recommend to use Noctua thermal paste, and only a nice little dab is needed to get a good thin layer on top in stainless steel before replacement and reassembly.  I extend it with a finger gloved latex in a circualr motion to cover the flat top surface, where was the laser engraving.  You want pretty thin... not so thin that they are able to see through, but close to that.  You screw the radiator on sequentially across, opposing live a few laps at a time, until they just gently... the bottom but do not turn the handle downwards beyond.  It is fine to do walks back and gently bottem them again to get all too tight 4.

  Upgrade to the latest version of the BIOS first, and only a reboot may be necessary to work with the new processor.  The latest version of the BIOS gives you the last HP "microcode", a hidden part of some updates to the BIOS, and which includes the list of specific processors that HP has certified to work with your particular workstation.  For example, you might see a processor that works in your computer in one of the QuickSpecs, but if you do not list your BIOS firmware, it won't work.  I do not think that HP ever pulls a processor from the list of firmware when it moves forward with a workstation... compatible motherboards X56xx should be able to run all X55xx older processors.

  Partners, it is important to know that there are two main versions of the Z600, with the latest version capable of running with some processors than the earlier version cannot.  By combining your second processor to exactly what you already have you don't need to think about this question, but if you want faster dual processor completely new, you will need to do more research in this forum about the revisions, which will be held with the two main motherboard reviews and the fact that you can use "performance" heat sinks if you go with the processors the "." more hot.

  The last QuickSpec for the Z600 (v51) covers X56xx and processors E56xx... QuickSpec is for the new revision of the motherboard.  You can search in the HP to find their searchable list of all prior QuickSpecs and see which processors have been certified for your motherboard probably original review.  Based on this research, you can choose to move to two correspondents faster 95W X55xx Xeons, but only get those who are in the list QuickSpec from HP (and get the latest not if there are several codes sSpec) for everything what install you on.

  Searchable QuickSpecs for Z600:

  Later and probably the last, is v51.  The PDF link get you more later.  The HTML link offers you the most recent, but also a drop-down list in the upper right to use to go back in time:

  http://WWW8.HP.com/h20195/v2/GetHtml.aspx?DocName=c04110961&search=Z600

  From there, you can create a chart on all previous processors available and choose what you want.  I recommend doing a chart for only the fastest and the second more fast X55xx processors in each QuickSpec and check eBay for the price.  A step down from the fastest often gets you a large drop of cost.   If you do this work, please report it here to help others.

• LightScribe CD not recognized

  My father has an old pc with windows xp top and lightscribe, and I recently bought 100 HP lightscribe CD.

  When I insert the lightscribe cd, I get an error message saying: he can not read the cd (it does not recognize that the cd is a lightscribe cd). I've updated the lightscribe driver, so this isn't the problem.

  What should I do?

  and no cd is not face down...

  We will discuss this, Ok?  What is the exact model number or the product number for the old WIN XP to the computer.

  You can verify that it is really "Lightscribe"?   To verify that the LightScribe disc, download and load 'Burn Image'.  Selest drive Tools tab, then capaabilities.  A look on the right for lightscribe pane. Is he "checked".

  Why are you ready do not want to use it, in my humble OPINION.

  (1) intensive process that significantly shorten the life cycle of the laser engraving. (Here, was to replace disc).

  (2) November 26, 2013, LightScribe HP official site has been deleted. This has been replaced with the following message:

  "Thank you for your interest in LightScribe disc labeling technology. This site is no longer active. LightScribe disk and software utilities can present themselves on a number of public websites. »

  (3) the surface of a LightScribe disc is coated with a reactive dye that changes color when it absorbs infrared laser light 780 nm. The engraved label will show no visible fading under exposure to lighting inside for at least two years

• weird problem of table absolutely do my head

  Hi people

  I'm writing a script to replace the numbers in the text with a few numbers of single track (for the laser engraving).

  I have set up an array of points for each number of replacement path and everything was a lot, but then just at the end everything went crazy.

  It's as if the path in reading the table, the values which are then modified for each position on the page are somehow update the original source value!

  I can't for the life of tell me what is happening and have been banging my head for the last two days.

  I'm a complete javascript numpty, so I guess that's a blatant fundamental question that I can't see.

  really hoping that someone can point out my problem.

  to test, open a doc of illustrator, add 3 text boxes, type "0123" in the first "04561" in the second and "78912" in the last, select all 3 and run the script.

  you will notice that any number in several boxes will start wildly compensation, because the points of origin of the table have been changed?

  popular suggestions

  see you soon... /Jeff

  //================================

  script to replace the numbers of text by numbers of friendly way of laser cutting

  Table of forms of letter:

  var numShapes = [];

  numShapes [0] = [[5.67,0.00], [0.00,5.67], [0.00,39.69], [5.67,45.35], [17.01,45.36], [22.68,39.69], [22.68,5.6-7], [17.01,0.00], [11.34,0.00]];

  numShapes [1] = [[5.67,34.02], [17.01,45.35], [17.01,0.00]];

  numShapes [2] = [[0.00,39.69], [5.67,45.35], [17.01,45.35], [22.68,39.69], [22.68,39.69], [22.68,28.35], [0.00, 0.00], [22.68,0.00]];

  numShapes [3] = [[0.00,45.35], [22.68,45.35], [17.01,28.35], [22.68,22.68], [22.68,5.67], [17.01,0.00], [5.67,0.00], [0.00,5.67]];

  numShapes [4] = [[22.68,17.01], [0.00,17.01], [17.01,45.35], [17.01,0.00]];

  numShapes [5] = [[22.68,45.35], [0.00,45.35], [0.00,28.35], [5.67,22.68], [17.01,22.68], [22.68,17.01], [22.68, 5.67], [17.01,0.00], [5.67,0.00], [0.00,5.67]];

  numShapes [6] = [[5.67,22.68], [17.01,22.68], [22.68,17.01], [22.68,5.67], [17.01,0.00], [5.67,0.00], [0.00,5.6-7], [0.00,22.68], [11.34,45.35]];

  numShapes [7] = [[0.00,45.35], [22.68,45.35], [5.67,0.00]];

  numShapes [8] = [[22.68,17.01], [22.68,5.67], [17.01,-0.00], [5.67,-0.00], [0.00,5.67], [0.00,17.01], [5.67, 22-68], [17.01,22.68], [22.68,28.35], [22.68,39.68], [17.01,45.35], [5.67,45.35], [0.00,39.68], [0,28.35 0.0]];

  numShapes [9] = [[11.34,0.00], [22.68,22.68], [22.68,39.69], [17.01,45.35], [5.67,45.35], [0.00,39.69], [0.00,2 8.35], [5.67,22.68], [17.01,22.68]];

  the scale of each letter, STD numbers 8x16mm

  scalar var = [1,1];

  myDoc var = app.activeDocument;

  selectedObjects = myDoc.selection;

  Search for new layer forms numbers

  {if (! doesLayerExist ("laserText"))}

  laserText = myDoc.layers.add)

  laserText.name = "laserText".

  } else {}

  laserText = myDoc.layers.getByName ("laserText")

  }

  for (var i = 0; i < selectedObjects.length; i ++) {}

  get the numbers in a table of the text element

  var curText = .silence selectedObjects [i];

  var curTextArray = arrayFromText (curText);

  Get the position of the text

  var f is selectedObjects [i] .geometricBounds;.

  var origin = [[0] Go, Go [3] + 15];                                                           Basic approximate setting

  var gridUnit = [28.347 * scalar [0], 28.347 * scalar [1]];                         convert points in mm

  draw each shape number

  for (var j = 0; j < curTextArray.length; j ++) {}

  var curNum = parseInt (curTextArray [j]);

  var newPathItem = laserText.pathItems.add ();

  newPathItem.stroked = true;

  newPathItem.filled = false;

  curNumPath = numShapes [curNum];

  position of installation of each new issue

  for (var k = 0; k < curNumPath.length; k ++) {}

  curNumPath [k] [0] = curNumPath [k] [0] * [0] scalar + original [0];

  curNumPath [k] [1] = curNumPath [k] [1] * scalar [1] + original [1];

  }

  newPathItem.setEntirePath (curNumPath);

  origin from stage to the next unit of rack on the next issue

  origin = [origin [0] + gridUnit [0], origin [1]];

  }

  }

  -utility functions

  function arrayFromText (inputText) {}

  var entry = inputText

  splitText var = input.split("");

  return of splitText

  }

  function doesLayerExist (name) {}

  for (i = 0; i < app.activeDocument.layers.length; i ++) {}

  If (app.activeDocument.layers [i] .name == name) return true;

  }

  Returns false;

  }

  you will notice that any number in several boxes will start wildly compensation, because the points of origin of the table have been changed?

  correct, there is no 'clone' command Array, curNumPath = numShapes [curNum]; does not have a separate copy of the table, curNumPath is just a reference to numShapes table

  var arr1 = [[0,1],[2,3]];
  var arr2 = arr1;
  
  $.writeln(arr1);
  $.writeln(arr2);
  
  arr2[0][0] = 7;
  
  $.writeln(arr1);
  $.writeln(arr2);
  

• Virtualizar a windows Server 2008 cluster

  Hola a todos.

  Tengo montado con servidores 2 HP y una HP SAN's a cluster of conmutacion por of error. El jefe ahora quiere aprovechar lo as tiene y crear a virtual sistema con S.O. ESX con alta availability between los 2 servidores, y las maquinas office y los datos en SAN (Todo esto sin perder) nor UN dato claro.

  Yo habia pensado en instalar in uno los servidore el SB ESX, virtualizar el otro con VMWare Converter, una vez virtualizado, quitarle el cluster, y aprobechar the SAN.

  MI pregunta are: the SAN is installed, running y con datos, ¿ESX veria SAN como esta o para as h. hay as formatearla, con todos los datos perderia what?.

  Gracias por todo y a greeting.

  Hola:

  Pues todo depende del tipo in SAN than tengas, los datos ocupacion y tengas organizadas como las lun.

  If the SAN are iSCSI ordered hacer las VMs las vieran como UN, vamos como lo haces en physical storage iSCSI LUN. If're por el tema FC are mas complejo is that the VM no can see directly las HBA (themselves could con hacer el Direct Path pero're bastante "quisquilloso" y pierdes important funcionalidades).

  Con los datos ocupacion me refiero a the en Saber cuanto t'ocupa los datos SAN ago created tendrias than using local storage el del servidor para las run VMs are para poder use SAN para las detect VMs tendrias than las formatear con VMFS LUNS con lo cual los datos perderias.

  You idea dinna well esta. Como son back nodos activo/passivo coges passivo UN ESX instalas el y puedes "jugar" are con el, el problema storage than tendrias that buscar is the storage intermedio, sea el disco local server ESX o algun storage nfs, para poder empty the SAN y formatearla con VMFS.

  Cuanto espacio you is available in en the SAN?

  Saludos.

• Back maternal dudas, sober y SAN clustering

  Hola mundo, tengo dudas back sober sober general contents soluciones clusterizadas correcta y con primario storage con vmware, estoy humildemente beginning in esto, y me seria mucho TR ayuda me Mani one cable las mas things claras para tener.

  Duda 1

  Tengo UN stage DRS + Ha con con back host fisicos Québec albergan una vm con una BBDD app, o a web server, o any service, in mid stage of formacion lo he probado wont y configurado, todo esta Ok, el bajo works, entonces... ESX cluster ¿porqué aun veo scenarios that montan con Microsoft cluster services, bajo una Québec are can soportar ese cluster with ESX infrastructure?

  Duda 2

  That're mejor y donde is applied every stage...

  Create a sober directly las LUN Universidad san datastore, y montar structure para los discos office of las vms (asi're como lo he hecho yo put en labs y aprendizajes)

  Crear las particiones y volumes led operating system directly atacando a San of the kbes LUN (accediendo a ellas desde el sagna comments directly). No tengo muy claro en than can beneficiar o damaging cada situation.

  Gracias por adelantado y perdonar TR cometo alguna burrada, are only of como el titulo del post, estoy formandome aun in this type of solutions.

  Para you pregunta segunda, comentarte that certainly are kbes back media:

  Crear DataStores are using el formateo del VMFS File System o use RAW Devices (Discos RDM) discos y formatearlos degeneration Neurofibrillaire for example para access directly a ellos.

  The use of RDM discos, to use en Máquinas Québec Office:

  -Tengan alguna the SAN management application y necesiten access directly has the LUN, sin pasar por datastore.

  -Para montar microsoft Cluster (el disco of quorum for example must be RDM).

  -Para determinadas por ejemeplo con VMs Exchange, what requieran una pizca & adicional en los IOPS, applications / s.

  El uso clubs office en VMFS (mediante data warehouses) allows use las advantages of VMWare y esa capa Quebec disco allows managing los storages of data between different hosts there should be the option use por defecto, tener of in case of Máquinas Office sin needs as he EDI in el punto anterior, con discos RDM.

  Saludos.

  Xavier

  VCP4 and professional VCP3 certified VMware.

  -

• Laser Jet 4100N: direct connection of Laser Jet 4100N using a crossover cable CAT5/6

  Hello

  I want to connect my Laser Jet 4100N directly to my laptop which only has USB and LAN ports.

  The printer has a parallel port and a LAN port.

  I have access to WiFi internet, the modem is located in another room.

  I have a CAT 5/6 connecting cable.

  I get the 192.168.1.8 IPv4 address for my computer by typing IPCONFIG at the command prompt.

  I connected the crossover between my laptop and the printer cable.

  Turn on the printer lit up an indicator on the LAN port on the printer.

  In the menu devices & printers, I added a new option of "using TCP/IP" printer and 192.168.1.8 provided IP address.

  The computer search TCP/IP but end in nothing.

  Please help me to communicate with the printer.

  Thank you.

  You try to use your wireless PC address to print with a wired device.

  Your PC has two network adapters, they are not in fact cards, they are integrated into the motherboard and but I will refer to them as cards for simplicity, or I could call ports.

  When you find the IP address of your PC you are probably finding an IP address wireless, but since you're wired card has never been configured statically and is not connected to a network there is no ip address.

  What I would do would be statically configure the IP address of the port wired on your PC, & I would something like 192. 168 2. 2, with a default gateway of 192. 168 2. 10, & a subnet mask of 255. 255 255. 0 and don't worry because you do not connect you to the largest network on the DNS servers. Then I go to the printer and change the network settings and give it a 192 IP address. 168 2. 10 and its default gateway I would set it to 192. 168 2. 2 and the subnet mask would be the same that you set on the PC.

  Regarding the process of search for the cable network on your PC etting sand information in map, I think you need to do some research of the internet based on your operating system. I mean version of Windows operating system. Windows 7 would be different from Windows 8 in perhaps a few minor details.

  The reason why I change that a number from 1 to a game in your IP address is that it puts the port wired into a network separate from the wireless port, in my view, that will keep your PC of confusion as to which port uses to communicate with the printer.

  And back to another part of the discussion, the default gateway of a network printer on a small network is often on the IP address of the printer because the printer has never try to connect to what outside the network, but in your case, we want to put the IP address of your PC wired port to ensure that When the preacher looking for information, outside of himself, he sends will go to your PC.

  If you find my post helpful please give me a few laurels by clicking the thumb upward under the post. The number of congratulations I helps to establish my credibility on the forums. If my information solves your problem then click on please accept it as a Solution button located under the point of sale, when messages are marked as being solutions which help other people decide that they are large enough to read when they have a similar problem.

• Direct print wirelessly from iPad Pro w/o third-party app?

  I want from my iPad Pro laser-printing on a printer wireless to work. My corporate network, however, is not configured to allow wireless printing; I have to work around the network with a direct wireless printing. I know that a lot of printers don't support not this, but everyone I've studied requires a third-party printing application. I'm sure that it will work very well, but I don't trust the manufacturers of printers to continue to support these applications.

  Is there a printer wireless laser available that I can print without a wifi network, directly from the iPad without a third party app?

  Thank you!

  John

  The printer you want to print unless on supports AirPrint, no, you would need an application.

  AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support

• Write directly to CD through the Explorer

  I have to be able to write data directly to a CD using the CD - RW in my sitting A40 Pro but the software that came with the laptop does not seem to support this (I get only a form any drag 'n' drop software).

  Anyone know of a certain form of DirectCD software that will work with CD - RW drive Sat Pro? I tried to 'a' version of Roxio, but it does not recognize the drive.

  Hello

  I'm a bit confused with your question because I don't understand what you mean exactly with Scripture directly? You can burn all your data using burning software. You can use the drag ' drop software or you can install your own fire program. If you don't want to use any burning software, you can burn your data using Windows in engraving option.

  Before you can use it, this option must be enabled. Start Windows Explorer, click with the right button on the DVD device and go to properties. You will find registration tab and please activate the recording of the CD turn on this option of the device.