My EQ extinguished and will not pass on. No EQ settings are sensitive. All the other settings are sensitive.
IPod classic 120 GB Version 2.0.1 PC model MB562LL
EQ off while playing with headphones and will not on. No EQ settings are sensitive. Center dial is pressed in EQ mode, IPod switches back on the settings Menu. This happens for all settings of the EQUALIZER. I did a hard reset by holding down the Center button and the menu button, but it did not work.
Try to go to the display settings on the iPod. Select reset settings (bottom of screen). This resets all settings on board by default (the data are not affected). Try to use the settings of the EQUALIZER again.
Tags: iPod
Similar Questions
-
The problem I have is that I am running Puppy Linux on my laptop.
Now, I have tried everything I can to get Java works under Firefox, chrome, or Seamonkey (I have all three browsers on my computer).
For firefox and seamonkey, I tried the following-
Downloaded the tar.gz for java file
he unzipped in/opt/java
went to/user/lib/mozilla/plugins and run the command
ln-s/opt/java/plugin/i386/ns7/libjavaplugin_oji.so
to create the symbolic link to the plugin
check that the plugin is executable (in fact even tried to give all full read/write permission and run it)For chrome does the same thing but put the symbolic link in the/usr/lib/chromium-linux/plugins folder instead.
Restart the web browser, even tried to restart the X server where the browser runs somewhere in the background.
All three browsers can pick up all other .so plugins in this folder except Java.
When I click on check plugins on firefox I access the page on 'Missing Java? -For your safety, Firefox has disabled your outdated version of Java. Please install the latest version.
However, the version I downloaded is Version 7 9 update that is exactly the same as that which is available under the latest version of Java is (it was only downloaded from this link a few minutes before, I even tried to re - download just in case there was an update in 5 minutes).
If I go to the Java folder and run the control panel of the Java Control Panel appears, and he knows where Java is installed and everything.
So what's happening? I have installed the plugin in the right directory? I guess then that is where all the other plugins are stored and Firefox, Chrome and Seamonkey are picking all others upward fine, or would there be an old version of Java lurking around somewhere on my system, Firefox, Seamonkey, and Chrome are trying all to use it?
I also tried to download the RPM and posing in the folder/usr/java and replacing the symlink/opt/java than in the folder/usr/java and still nothing.
I don't really understand it ' cos it's picking up all the other plugins like Gecko and even installed Flash in the same way and that works very well.
libjavaplugin_oji.so is the classic Java plugin.
You need the libnpjp2.so of next generation plugin (for examplejava/lib/i386/libnpjp2.so) for current browsers. -
I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!Any ideas on how may get a repair disk or fix it otherwise? Thank you very much
Run Memtest86 +: your computer passes this test?
Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152J W Stuart: http://www.pagestart.com
-
I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?
Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.
Hi, dadzippytr,
Click Start and type services.msc
Press enter
Scroll down to print spooler
Right-click on the spooler and select stop
Wait for Windows to stop the spooler
Close the window
Control Panel > printers folder
Right-click on the printer icon and select open
Click file > cancel all Documents
Close the window
Start > right click on computer
Click on manage
Select Device Manager
Click on the + sign next to the Ieee... compatible printers
Right-click on the driver and select uninstall
Click on the + next to imaging devices
Right-click on the driver and select uninstall
Click on the + sign next to printers
Right-click on the driver and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the printer driver and select uninstall
Close the Device Manager
Restart the computer
Windows will reinstall the drivers
Go to the manufacturer's website and search for updated drivers
Don't forget to come back to services and start print spooler before printing again.
-
Running Windows 7 and I cannot scan my computer or download files, system tray blushed and said, 'the file contains a virus' and the computer, and then delete the file. In the alert section it says that Windows Defender works. But it will not open Setup or scan. try to get a repair tool and the file does not open, he repeats to me, the file contains a virus and it does not open. What can I do other than to bring this problem to the experts. Maybe someone has an answer.
Thanks, D G
Your PC may be infected with the new variant of Sirefef AKA Zero access is. One of the problems is that the downloads are identified (wrongly) as a virus... and it will be often disable and prevent installation of various anti-malware programs.http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Win32%2FSirefef
Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.
For more information, see http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf
And
http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html
The Windows Defender program which is pre-installed on W7 and Vista is an antispyware program only... .you must run a program full anti-malware.
http://www.techsupportalert.com/best-free-anti-virus-software.htm
http://www.dslreports.com/Forum/r28298407-2013-anti-virus-poll-
http://www.AV-Comparatives.org/
http://ask-Leo.com/what_security_software_do_you_recommend.html
See the following compliments of quietman7 MS MVP : choose an anti-virus program
-
HP Photosmart 7520 will not connect to my laptop but works perfectly on the other computer
I run window 8 on laptop, we have the HP Photosmart 7520 work wireless on our network with another computer on Windows 8, which has no problems today. We had this printer over a year and ussually works well.
The printer, laptop and office are on the same network
The laptop suddenly stopped working without modification
I stop and restart both the printer and the laptop - and disconnected and reconnected the network time
I used the HP troubleshooting of the printer, as this is not the first time that I had this problem
I spent hours looking for the printer and by entering the IP address
I've disabled the firewall and tried
HELP what am I missing
Hello @kingshometown , welcome to the forums
I read on how your mobile PC running Windows 8, is no longer connect to your Photosmart 7520 and does not. I have a suggestion for you that can help.
Please try the following steps: a display of the error "Unable to Find printer" for the HP Photosmart 7520 e - all - in - one printer series "
Best wishes let me know the result!
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
DeskJet 712C: ink cartridge is stuck in the right side and will not go
I have an old DeskJet 712C printer which was working fine until today. Strangely, the ink cartridge is stuck in the right side of the printer and will not spend. As soon as I turn on the printer, the red light starts flashing. Does anyone know tricks to get the cartridge to move again? Thank you for your help.
Hello
It may be possible to move the cart if you turn the printer off. Unplug the printer and open the cover of the printer. See if you can move the carriage by hand. If possible, move the carriage to the Center. Check that nothing of blocking the abnormal movements of transport - for example the pieces of paper.
Close the cover and then plug the printer back. I hope this will help.
I found a YouTube video that shows fixing carriage jam on printers C4200 (I know that they are not the same as the 712 C), but some of the suggestions will be useful if my initial thought above does not help. the video is on this link:
http://www.YouTube.com/watch?v=l9x6ZLIYMog
Once again these tips are not specifically for your printer, but they can help solve your problem.
I hope that was helpful.
-
Computer hp laptop 15 will not pass the logon screen
I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?
Hi @samlobos,
Thank you for joining the HP Forums!
I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!
Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
I hope that this post helps!
-
My IPad sudenly turned off and will not restart. It is fully charged.
My IPad sudenly turned off and will not restart. It is fully charged.
What you have tried so that he could begin until For example you soft-reset/reboot trieda? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.
-
I ran repair permissions in disk utility. the latest information that printed was, (warning SUID FileSystem/library /CoreService /RemoteManagement /Contents /MacOS /ARDAgent ARDAgent.App) has been modified and will not be repaired. This warns something that I really need to worry. Also, how can it be fixed
Don't worry about this.
-
I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?
This page opens another page in a frame.
In such a case, you cannot make an exception.This server does not send a certificate chain that ends with a built-in root certificate.
You can open this page in a tab to make it possible to create an exception if you really need access to the site.
Note that storing a permanent exception should not be.Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:
- chrome://pippki/content/exceptionDialog.XUL
In the field location type and paste the URL of the Web site
- retrieve the certificate via the button 'Get certificate '.
- inspect the certificate via the "view..." button. »
-
My 6 month Apple Watch stopped charging and will not restart.
My 6 month Apple Watch stopped charging and will not restart.
Hello
Try the following steps:
Charge your watch about 2.5 hours, making sure you follow the instructions in charge here:
Check your battery and load your Apple Watch - Apple Support
After charging, if your watch has not already restarted automatically:
-Try to restart it (by pressing the side button until you see the Apple logo).
-If it still does not start, then try force it restarts again: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.
If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:
Contact - Support official Apple
https://Twitter.com/applesupport
More information:
If your Apple Watch does not respond or won't turn on - Apple Support
-
Had cracked screen but the phone works still. Today screen is become white, and the phone rang again. Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed
He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.
-
Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.
Sorted now
Maybe you are looking for
-
C external drive for MacBook Air
I need an external drive C ONLY for transfer applications such as TurboTax, iBank, etc disc to hard drive on the MacBook Air. Bought an external drive of C & computer recognize no more disc stuck in drive C. visit mandatory at the Genius Bar to eject
-
I'm the new owner of the iphone 5 and past owner forgot him I cloud how can I do this help me
I'm the new owner of the iphone 5 and the last owner has forgotten her icloud to activate account. Please help me thanks
-
0x8000CCC0E__Cant find correct POP3 details for direct mail
I recently got a new e-mail address * E-mail address is removed from the privacy *. now, it's a hotmail address I have to connect to hotmail check my mails, but I can't find the details of POP3 and SMTP to use this account with windows live mail and
-
HP Mini 110-1197TU: HP Mini 110-1197TU error fatal system stopped
Recently, I turned on my computer HP Mini 110-1197TU netbook will be presented with a password prompt. After failing the password 3 times, I got a message on a fatal error system stopped and code CNU9393DPK. How to reset this password or recover my n
-
Unable to access applications after the installation of CC2015.
I installed CC 2015 and when you access applications, the right spinning wheel will not stop. Help?