Dual Boot Windows 7 pro / Windows 7 pro

Similar Questions

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• Dual Boot windows Linux 8.1 on Pavilion 17-e157eo

  Will there be a completely safe way for a dual-boot Windows 8.1 and Linux on a Pavilion 17-e157eo?

  I searched the dualboot topics, but solutions do not seem to apply in this case.  Secure boot has been disabled. Quick start has been disabled. In this PC disk partitions are not dynamic but simple.

  Starting from a Live Linux DVD results in a blank screen even if the DVD player is clearly read something.  Is the problem due to the fact that this PC has the INTEL 4600 graphics chip and an AMD Radeon 8670 M?

  A better solution would be to use VMware or VirtualBox, set up a Linux guest operating system, the host system is of course Windows 8.1?

  No problem, glad I could help. If you could mark one of my posts with an acceptable Solution and congratulations if this information was useful, it would be much appreciated and it would be useful to other institutions. Thank you and have a great day!

  Mario

• Re: Tecra S11 - Dual boot Windows 7 and XP

  I installed Windows 7 (from the hidden to the hardrive recovery section) on my new Tecra S11. I would like to know if I can use the Windows XP
  recovery media provided by Toshiba to create a dual boot Windows 7/Windows XP rather than go back to XP?

  Hi dualboot.

  As far as I know it of not possible to create a dual boot with XP and Windows 7 Toshiba Recovery disk. The problem is that the recovery disk erases the entire HARD disk, so there is no option to create a dual boot with another operating system.

  If you want XP too you need to a normal XP installation disk Microsoft or you use virtualization of Windows 7 XP mode, if some n t applications run on Windows 7. ;)

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• windows upgrade xp to vista in dual boot windows xp home and windows 7 ultimate

  Hello, I was wondering if it was possible to upgrade from windows xp home edition to windows vista in dual boot windows xp home edition and windows 7 ultimate.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Here is some information on my computer
  Dell dimension 2400
  Intel celeron 2.40 ghz
  80 GB ide hard drive
  DVD player and cd player
  pre installed windows xp 36 GB 8 GB free
  Make a new partition for windows 7 34 gb free 18
  integrated graphics (60.5 MB)
  Thank you

  Yes you can.

• Remove dual-boot windows partitions 8

  Hi, I have a Hp probook 4530 s with windows 7 64 bit and I want to dual-boot windows 8 but I have the authorized maximum of partitions and I bought the recovery disc for windows 7 so I don't no if I should remove the recovery partition or the tools of hp, hp is pretty much empty is only using 1 mb to 5 GB , but I've heard that there a few updates to the BIOS, so safely remove one of these parties (recovery, tools, or both) to dual-boot windows 8?

  

  What I do is get a 3 TB external hard drive, or a size larger than your 500 GB. Create a widnows system repair disc 7. Use Macrium reflect free, all partitions (snapshot of the disk) backup, delete the ones that aren't needed. Tools and recovery are not necessary (but you should keep a copy so that you can go back to where you are now). The first partition contains startup information so don't get ride of that one. But even if you did and only restored the great OS partition, you could always use the system repair disc, do a startup repair and replace the boot on this single partition files and you're on your way again (it's just an extra step).

  After you remove the 2 partitions have not yet enough space to install windows 8. Go to disk management in windows 7 and shrink the partition and create a new partition in the remaining space.

• Dual-boot windows 7 on Windows 8 Hp Pavilion Desktop

  Hello
  I need help Dual-boot Windows 7 on my desktop Windows 8. I know it's 'public' to format the hard drive and install windows 7 on windows 8; So I decided to dual-boot. I have found no guides on the internet about how to do this. My computer model: PC p7-1414. I already have a DVD of windows 7 to install Windows 7 with. If you can help me it would be greatly appreciated dual-boot.

  If there is something similar to the line "UEFI" (something like "hp DVD...) in the image below? If so, boot from this line item UEFI.

  

  Please send Bravo

• Dual boot windows 7 and windows 8

  I would like to know how I would do a dual boot Windows 7 Ultimate for Windows download e-8 for 32 bit?

  How dual boot Windows 7 and Windows 8
  http://www.PAGESTART.com/win8cpdb02171201.html

  The goal here is to create a Windows 7 and Windows 8 Dual Boot computer while protecting your investment in Windows 7 (if problems arise) or do you simply not not to continue to use Windows 8.

  J W Stuart: http://www.pagestart.com

• Dual Boot Windows?

  I have a dual boot Windows 7 and Windows 8. I was wondering if I could increase the size of the space of hard disk for Windows 8?

  There are 333 GB of space available for Windows 7 and 20.8 GB available for Windows 8.
  I would like to know if its possible to increase space for Windows 8?

  You must use a third-party tool such as Easeus Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

  This will allow you to resize the boot partition by dragging the button to allocate the extra space for Windows 7 or Windows 8.

  Attention, create a recovery for Windows 7 and Windows 8 disk before doing this:

  Windows 8:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Windows 7:

  http://notebooks.com/2011/02/09/how-to-create-a-system-repair-disc-in-Windows-7/

• Can I dual-boot windows 7 with windows 8?

  Hello

  Currently I'm with Windows 8 enterprise edition and now I want to dual boot into windows 7 to be part of my software work. For example my TV tuner software.

  Don't forget that now I'm on windows 8. So, what I can dual boot Windows 7? If so, how?

  And, I can access all the drives and folders with two BONES? will I have to install the software in the two BONES? Can I access photos and videos of these two BONES?

  Hi Laxmi,

  Thanks for posting your query in Microsoft Community.

  I regret the inconvenience caused to you.

  I suggest you to check with our TechNet forum to improve assistance to the question.

  Click on, https://social.technet.microsoft.com/Forums/en-US/home

  If you have additional questions about Windows operating systems, please do not hesitate to contact us again. We will be happy to assist you accordingly.

  Thank you.

• How to connect W XP to DSL with Dual Boot Windows 7 Pro & Windows XP Pro,

  Have Windows 7 Pro & Windows XP Pro installed in a dual-boot on a new computer configuration. Have Windows 7 Pro connected to the DSL through a wired connection to the Cisco router. How can I connect Windows XP to DSL, via wired or wireless?

  Hello

  Thanks for posting your query in Microsoft Community.

   

  I understand that you must also connect the Windows XP operating system to a network.

  Here are a few steps to do this, please follow.

  Step 1: Set up Windows XP DSL Connection: using the new network connection wizard.

  1. Click Start and follow the path: programs-> Accessories-> Communications.

  2. Select the New Connection Wizard , and then click Next.

  3. There are several options in the wizard. You set a Windows XP DSL connection, select the option above that says to connect to the internet and click Next.

  4. Select Setup my connection manually and click Next.

  5. Here, there are three options. The first is for the modem connection, so we must not select. If your DSL account is always enabled, select the third option and click Finish and see the next section on IP addresses. If your DSL account is a limited account, which requires the password, select the second option and click Next.

  6. Enter a name for this connection, and then click Next.

  7. In this screen, enter your DSL ID and the password that you got from the ISP. Click Finish.

  Hope this information is useful. Please update the status of this issue. Do not hesitate to contact us to get help with the Windows operating system. We are happy to help you.

  Thank you.

• Dual Boot Windows 10 error

  Greetings!

  I have a MacBook Early 2015 Pro 13 "i5 2.7 GHz, 16 GB of RAM and 128 GB SSD.

  I decided to dual boot my mac with Windows 64-bit 10 and I downloaded the file ISO 10 64-bit Windows, and when I tried to use the Bootcamp Assistant to install it, it gave me the following error message:

  

  This is clearly an iso version beyond Windows 8, I'm stumped!

  Thanks in advance for all comments and advice!

  Can validate you your ISO for the size and MD5sum as shown, using OS x Terminal?

  OpenSSL md5 Win10_1511_2_English_x64.iso

  MD5 (Win10_1511_2_English_x64. ISO) = 3ca03a2c59ae5b58ca965a345d4f2ae1

  LS - lgh Win10_1511_2_English_x64.iso

  -rw - r - r-@ 1 staff 4.2 G may 7 08:33 Win10_1511_2_English_x64.iso

• Is there an easy way to dual boot Windows 7 and Windows XP?

  I have win xp pro on a single hard drive and just installed the new drive with win 7pro, y at - it a simple way for dual boot

  original title: how to dual boot

  So, EasyBCD works on XP and Windows 7, install on one or both. I would like to start with Windows 7, first, look what it displays (list view). Then install on XP and see if the 'List' mode allows to detect when compaired to Windows 7.

  Then make the changes of the version of Windows 7.

  J W Stuart: http://www.pagestart.com

• Dual-booting Win XP Pro SP3 - best practices of size Partition

  Hello. I want to create a dual-boot installation, both using Win XP Pro SP3 on a large hard drive while having an extended partition available for data. I expect in the next two years, going to upgrade to Windows 7 Pro. Put the two primary partitions to 20 GB enough or should I go ahead and do 40-50GB each in preparation for a future upgrade. Thank you!

  20 GB is too small to install and run Windows 7 well.  I'd go with 40 to 50 GB. Boulder computer Maven
  Most Microsoft Valuable Professional